Epson Printer not working? how to get your uv printer printing again or dtf
HTML-код
- Опубликовано: 25 сен 2023
- Today I will show you the trick to get your uv or dtf printer up and running again and why capping or inkpad station is so important and how to test this connection
Link to the printer I use
uvprinterparts.com/products/6...
link to the ink I use
uvprinterparts.com/products/u...
link to the caps I use
uvprinterparts.com/products/e...
the xp600 printhead I suggest and use
uvprinterparts.com/products/r...
you are not alone
We have created a Facebook group to help repair and diagnose your printer take a look at it here.
/ 674599697555960
Also UV Printer parts is looking for good affiliates if you think you can share and promote printer parts or ink apply here it is free to apply and join and you will earn money
af.uppromote.com/73e687/register
check out my sign shop.
www.footstepsinthepast.com 
Хобби
Oh Man, thank you!!!
What if after doing all that , the print head doesn’t still comes out ink ?Am facing the same problem with my UV printer ,Epson L805, maybe can it be a cable problem or motherboard? In case it’s a cable , which cable do I need to check ?
Hi Jay. I replaced both my printheads today. Colour is pulling through ink, but the white is not pulling through ink at all. I seems like it is not sealing properly, but i tried aligning the cap even replaced the cap, still nothing. Followed all your steps. Nothing. But when station is off to the side the white ink just seeps through the head onto the bed. What do you think the problem could be, is the new head faulty?
Hi. You are awesome! I have a question... when I run my cleaning, white ink sometimes overflows over and around my cap. There is a strong suction from my waste tube. What could be the problem?
Don't clean so long try a weaker clean.
@@JaysToDoList ok i'll try that. Thanks
@@JaysToDoListplease. Help me😢. My print knew the whiter ink. No show. I tray everything 😢
Right at 6:19 where can I find that connector that connects the 2 lines together. thanks
I have them how many do you need?
What if after doing all that , the print head doesn’t still comes out ink ?Am facing the same problem with my UV printer ,Epson L805, maybe can it be a cable problem or motherboard? In case it’s a cable , which cable do I need to check ?
Did you get your problem solved? Am having the same problem with my Epson L805. Have replaced the printhead but still not printing
Can the varnish print heads get clogged? Might be a dumb question
not a dumb question yes it can get clogged if you are not running it I suggest turning off the lamp for it if your machine allows it. in fact I have an entire video on why printheads clog mostly on the white but this applies to the varnish and cmyk as well ruclips.net/video/x3h7tMHetxQ/видео.html
yes we can confirm@@JaysToDoList
What does it mean if the Printer software keeps saying my red and black ink are low, but they are full? These colors also refuse to load at the moment. I have replaced the ink pad, the damper, lifted the ink pad with washers and it still will not suck red and black ink into the head.
Disregard Jay. The line coming from the ink pad to the pump motor was pinched.
Maybe the software will support ink level and you do not have inklevel sensors or your sensor is maybe broken or stuck
Hello! I have a differenr A3 printer but any suggestion on an xp600 not printing ink entirely? We did follow a video of yours to soak it and flush. All the Ink channels have good ink drippings when we flushed, but when tried printing, it seems to nor work🥺 help pleasssse
It will print nothing at all? Hiw about the nozzle check? Makes me think either there is a problem with ink supply or the head is bad
Thank you for your response.
No it doesn’t print anything at all. We already changed the printhead (but it started printing lines, flushed several times but did not fix the lines and then the magenta clogged). So we took it out and soaked it overnight. When we put back the new printhead back, the same thing happened. No ink is printing.
I have a same issue but with my varnish. I have good suction, and good print on my color but my varnish is not working at all
Mine is totally messed up and no ink is coming out. Did you figure out yours?
@@xiennamariebretana1620 no, still no luck
Hey, good brother. Every time I do a nozzle check, no ink lines show at all. What could it be ?
Does it load ink? If so we expect the head if it does not load in expect inkpump cap or hose
my uv printer is printing black as green what should i do
Send us a message here we can help get you back running facebook.com/profile.php?id=61550250208064&mibextid=ZbWKwL
We replaced the white and gloss print heads and now the printer isn't printing anything. It acts like it's printing but even the color head isn't printing. We tried printing with just the color head and still nothing. Ideas?
Is it loading ink? If so I'm worried your headboard might need replaced since it is affecting 3 heads
@@JaysToDoList It is loading ink. It was printing fine using just color before connecting the two new heads. Connected the gloss on Friday and had no issues (color) printing but the gloss wasn't printing. When we connected the new white print head today we got a warning beeping for a minute then turned the machine off and back on. then no warning beep but none of the heads will print now. The machine acts as if it's printing, but nothing comes out.
@user-pu5uh8lz7b un hook the white head does it print? If so it xould be a bad cable or head even if it is new
I unhooked the cable for the white already and still no printing from the color head. Do I need to disconnect the dampeners as well? @@JaysToDoList
@@JaysToDoList we unhooked the cable for the white print head and still no printing from the color head. then we unhooked the gloss and well, still no printing. Do the dampeners also need to be disconnected from the white print head?