How to Replace Front Strut and Spring Assembly 2009-2020 Dodge Journey
HTML-код
- Опубликовано: 10 сен 2024
- Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ia/1AST...
This video shows you how to install new reliable TRQ struts in your 2009-2020 Dodge Journey. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.
This process should be similar on the following vehicles:
2009 Dodge Journey
2010 Dodge Journey
2011 Dodge Journey
2012 Dodge Journey
2013 Dodge Journey
2014 Dodge Journey
2015 Dodge Journey
2016 Dodge Journey
2017 Dodge Journey
2018 Dodge Journey
2019 Dodge Journey
2020 Dodge Journey
Tools you will need:
• Impact Screwdriver 1aau.to/oa/1AXA...
• Pry Bar 1aau.to/oa/1AXA...
• 18mm Wrench
• 21mm wrench
• 13mm Socket 1aau.to/oa/1AXA...
• 15mm Socket 1aau.to/oa/1AXA...
• 19mm Socket 1aau.to/oa/1AXA...
• 21mm Socket 1aau.to/oa/1AXA...
• 32mm Socket 1aau.to/oa/1AAS...
• Trim Tool Set 1aau.to/oa/1AXX...
• Ratchet 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Liquid Thread Locker
• Painter's Tape
• Center Punch 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
You don't need to remove the wipers or the plastic cowls. Unclip the lower cowl from the strut brace (Xmas tree clips along the bottom and the 4 on the front), turn the clip 1/4 turn close to the middle near the passenger side wiper (to disengage it), undo/remove the plastic "screws" and clips on the outside most corners. The you can lift the cowl up enough (it will unclip along the top). The you can unbolt the strut brace and remove it from the vehicle. Good video
One of the best tutorials I have ever watched. Thanks so much for adding the torque specks to your video. that really helps out.
Gives VERY GOOD info and specs! Not drawn out watching removing removing wheel lug nuts and other crap!! Love straight to the point!!
Wow. I don't even have a need to do this but I was searching for something else, found this. Couldn't stop watching. Why? Watched a lot of DIY auto repair videos. I've never seen one as well produced and written as this. Sublime.
+Glenn V Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Thank you for the video! My friend and I were able to do this in 3.5 hours. Unlike most projects, we didn't run into any issues. Great guide, thank you!
+@pasta-eo5mt Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
I had to do this job 3 yrs ago because my brother was told that the shop wanted over $900 to do this. He bought the parts and we did this in my garage at home for less than half of that amount. It was a PITA to go through the access points near the wipers but overall, we got it done ourselves and saved about $500
The BEST VIDEO I have ever seen on a replacement, WOW!!!!
Thank you for this video I just changed the struts in my friend's 2016 Dodge Journey and she was so satisfied 👍🏼👍🏼 TRQ
When replacing the front struts, do I have to replace the rear ones at the same time as well?
Thank so much 🙌🏻
Thanks for this powerful video.
You do good work
Can this fit a 2.4l I was checking the website but the title says v6 3.6?
Can anyone tell me, the housing that goes around the top of the strut on a 2012 dodge journey, is that fully enclosed around the strut, or is it open in the back that leads to the engine? I can't see there on the backside nearest to the cabin if it's open or not.
I need the strut, cv axle and wheel bearing replaced. So would you advice me to change the strut first, then the cv axle then the wheel bearing?
What was the torque spec for the 3 upper stut assembly boldts?
Good very good
God damn, all that for a strut, literally took the wheel off a mazda 3 and had to undo a whopping 4 bolts to take out the whole thing
Yeah, you should see what you have to do to replace the battery
Hmm, my 09 journey says spindle nut front is 97 foot pounds and rear is 181. I just replaced the front hub and now I’m second guessing the torque spec.
Very informative videos. Keep up the excellent work.
I learned something
Do you need a wheel alignment after?
Can you do this without all the shop tools?
Yes you can it'll just be more time replacing whatever your replacing and you'll have to have it sitting on jack stands or some thing that can be set high enough for you to get to wherever you need it
Do for 2011-2020 Jeep Grand Cherokee please
Is this a v6
+Cee J Yes, this repair is for the V6 models.
Why do I need to replace both if only one is bad?