That's why we love you. If there was another company, which there isn't. They would have taken the easy way out and make for quick videos and called it a week's worth of work.
For some odd reason I never though to use the water method with bling anything. Glad to know that, now I will have less waste and perfectly placed decals!
Great video as always. Instead of cutting the bling anything material I do it a little differently. I cut the iron on glitter and the bling anything into a square the size of the decal I want and the iron them together. Then I peel off the top plastic sheet from the glitter and place the fused materials on my cutting mat and cut the design with a deep cup blade. Then I don’t have to line anything up.
Love you’re energy Matt. Thank you for all the videos. Gotta get my Graphtec up and running and I can’t wait to buy all my supplies from The Rhinestone World!
Hope the last few years have been fruitful! We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have. If you're still following - awesome! If not, we'd love to have you back! We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways! (To join, hit subscribe and during the live that opens a Live Chat button!) Hope to see you there! -TRW Crystal
Caroline Crable, Yes it was Glitter HTV. It is because I will not be laundering a cup. You can layer Glitter HTV like this with Bling Anything to make a decal. :)
We pressed a transfer from 613 originals to bling anything and put it on our truck as a decal. It has been on there for 6 months In the AZ sun, rain, hail, wind, and mild (in the teens and 20’s) freezing weather. The transfer hasn’t faded noticeably and the bling anything is holding it tight (so far).
Soooo....if I were to cut just pink, no black at all, would I cut all of those details in the pink, or leave those tiny details in for more surface adherence?
Clem E, That's a great question. I think you would be ok just doing the contour because those areas would be so small. I don;t think the cloudiness would show much in that small of an area. It could be cut though. NEW Video. :)
You do need to trim the Bling Anything, unless you created an offset in your software and cut the Bling Anything with your vinyl cutter ahead of time like Matt did for this video. This is usually a lot more difficult to line up to press, since the carrier for the glitter htv is cloudy and hard to see through, so we usually recommend trimming with a pair of scissors after you've pressed. -TRW Pilar
I am having issues with HTV anything, the box has no instructions and u jump pass cut setting, which side goes down on my mat, which side do I apply the vinyl too
Hey there! Please email us at info@therhinestoneworld.com for detailed instructions on how to use this product. Just to answer the questions posed in the comment: The cloudy backing side goes down on the mat, and you cut and press to the shiny side of the material. - TRW Haley
So late to this game but I'm trying :) Question the pink glitter layer just went on top of the black glitter layer correct? No bling anything material on the pink layer?
That is a great question! Yes, you most definitely CAN do this with HTV Anything. Bling Anything was our original material that turned heat applied materials into decals. We came out with HTV Anything about 2 years ago, which has all the same properties as Bling Anything, with the exception that you can't press hotfix rhinestones directly to HTV Anything. :) -TRW Pilar
Awesome! We've used all sorts of cups, mugs, and tumblers, and have had equally amazing results with each. Recently, I spoke to a customer who has been using her favorite mug, adorned with a Bling Anything decal, for over four years with no issues! - TRW Haley
If it sticks (enough to withstand a dishwasher), how were you able to remove the turtle design so easily? Will it cure over time so curious finger nails can't lift it off?
You will not want to cut Bling Anything with a cutter. I recommend cutting a near-to-size piece with scissors, pressing your material to it, and then trimming very closely with scissors. - TRW Haley
I just pressed HTV vinyl onto the bling anything and it would not come off of the HTV carrier sheet. I tried to remove it and ruined it.😞 Can we not use HTV? Ruined my HTV and my very expensive Bling Anything twice…I forgot to mirror it and had to recut….ugh!
For HTV we prefer HTV Anything. This video was made before we invented HTV Anything and the materials are a touch different now, such as HTV Anything is thinner and easier to work with, which is why we invented it :-) -TRW Crystal
![Eminem - Fuel (feat. JID) [Official Lyric Video]](http://i.ytimg.com/vi/t5H_CewqpKA/mqdefault.jpg)
That's why we love you. If there was another company, which there isn't. They would have taken the easy way out and make for quick videos and called it a week's worth of work.
Thanks Joe Gampa! You know we just get stuff done. :)
For some odd reason I never though to use the water method with bling anything. Glad to know that, now I will have less waste and perfectly placed decals!
Cami Campbell, Makes it so much easier to apply.
Great video as always. Instead of cutting the bling anything material I do it a little differently. I cut the iron on glitter and the bling anything into a square the size of the decal I want and the iron them together. Then I peel off the top plastic sheet from the glitter and place the fused materials on my cutting mat and cut the design with a deep cup blade. Then I don’t have to line anything up.
Lind Mar, Creative! I like it. Are you setting registration marks for the cut?
Well haven’t done the registration marks yet because I haven’t done it for layering. I just cut it like it’s chip board if I’m cutting one shape.
I'm so glad I discovered you.
I'm brand new with Cricut and still very intimidated.
Welcome to the Crew! We have more cricut videos here:
www.youtube.com/@TheRhinestoneWorld/search?query=cricut
-TRW Crystal
Love you’re energy Matt. Thank you for all the videos. Gotta get my Graphtec up and running and I can’t wait to buy all my supplies from The Rhinestone World!
Hope the last few years have been fruitful!
We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have.
If you're still following - awesome! If not, we'd love to have you back!
We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways!
(To join, hit subscribe and during the live that opens a Live Chat button!)
Hope to see you there!
-TRW Crystal
Was away and just saw your wonderful video. Question.....you said it's dishwasher safe. The dishwasher doesn't affect the glitter HTV either?
That is Correct!
Need to watch that video I want the one that you do want to come on as a nurse that’s a nice video with the cup
Great video!! thank you for all the tips! Question...if I'm making a decal for a tumbler, do I have to mirror the image?
Hi Valerie! If you are using Adhesive Vinyl you do not need to mirror the image.
-TRW Abby
Hi Matt I am new to all this. Was the pink, glitter htv too? If so, I thought you couldn't layer glitter htv?
Caroline Crable, Yes it was Glitter HTV. It is because I will not be laundering a cup. You can layer Glitter HTV like this with Bling Anything to make a decal. :)
@@TheRhinestoneWorld can u do this with htv anything as well
Can we apply a screenprint transfer onto the Bling Anything material?
We pressed a transfer from 613 originals to bling anything and put it on our truck as a decal. It has been on there for 6 months In the AZ sun, rain, hail, wind, and mild (in the teens and 20’s) freezing weather. The transfer hasn’t faded noticeably and the bling anything is holding it tight (so far).
Peter John Lujan, We have had some success. It is hard to get perfect everytime though.
@@TheRhinestoneWorld thank you. May give it a try since you did give a coupon code. 😁
awesome content
MisterTracks, Thank you for taking time to watch our video. Matt
Soooo....if I were to cut just pink, no black at all, would I cut all of those details in the pink, or leave those tiny details in for more surface adherence?
Clem E, That's a great question. I think you would be ok just doing the contour because those areas would be so small. I don;t think the cloudiness would show much in that small of an area. It could be cut though. NEW Video. :)
Thanks Matt! This really helped me a lot!
Clem E Awesome! So glad the Video helped you! Thanks for watching! Matt
Once you hear press it you don’t have to cut around the bling anything? It’s right in the decal?
You do need to trim the Bling Anything, unless you created an offset in your software and cut the Bling Anything with your vinyl cutter ahead of time like Matt did for this video. This is usually a lot more difficult to line up to press, since the carrier for the glitter htv is cloudy and hard to see through, so we usually recommend trimming with a pair of scissors after you've pressed. -TRW Pilar
Is the billing anything material just to make it adhere better?
Bling/HTV Anything material is used to turn HTV into decals! Normally, you would have to use decal vinyl instead.
-TRW Bri
I am having issues with HTV anything, the box has no instructions and u jump pass cut setting, which side goes down on my mat, which side do I apply the vinyl too
Hey there! Please email us at info@therhinestoneworld.com for detailed instructions on how to use this product.
Just to answer the questions posed in the comment: The cloudy backing side goes down on the mat, and you cut and press to the shiny side of the material.
- TRW Haley
So no heat press needed? And it's as durable if you were to use htv?
Yes, decals are known to stick quite well. You do need a heat press to press vinyl onto the bling anything.
-TRW Bri
So late to this game but I'm trying :) Question the pink glitter layer just went on top of the black glitter layer correct? No bling anything material on the pink layer?
No bling anything material was used for this. You can layer the pink glitter on top of the black glitter! Great question!
-TRW Abby
TheRhinestoneWorld thanks so much!!
Thanks Matt!!
Andrea Merritt You're very welcome!
How much would you charge for these decals? Let's say maybe a 3 color decal 4x4?
Somewhere between $12-$20, probably.
-TRW Bri
can u do this with htv anything as well
That is a great question! Yes, you most definitely CAN do this with HTV Anything. Bling Anything was our original material that turned heat applied materials into decals. We came out with HTV Anything about 2 years ago, which has all the same properties as Bling Anything, with the exception that you can't press hotfix rhinestones directly to HTV Anything. :) -TRW Pilar
Another great video! Thanks!
Cassandra Knight, Thank you for watching hope the video helped. Matt
How does it hold up on different types of plastic cups
Awesome! We've used all sorts of cups, mugs, and tumblers, and have had equally amazing results with each. Recently, I spoke to a customer who has been using her favorite mug, adorned with a Bling Anything decal, for over four years with no issues!
- TRW Haley
Good video Matt thanks
Thanks Jessie gibson
That is awesome!!
Thanks!
-TRW Abby
If it sticks (enough to withstand a dishwasher), how were you able to remove the turtle design so easily? Will it cure over time so curious finger nails can't lift it off?
Kingsbury Craft's, Correct, It is difficult to pull off and you need to get up under it and pull pretty good.
What settings so you use on a cameo to cut thr vling anything material? I had a difficult time cutting it
You will not want to cut Bling Anything with a cutter. I recommend cutting a near-to-size piece with scissors, pressing your material to it, and then trimming very closely with scissors.
- TRW Haley
I just pressed HTV vinyl onto the bling anything and it would not come off of the HTV carrier sheet. I tried to remove it and ruined it.😞 Can we not use HTV? Ruined my HTV and my very expensive Bling Anything twice…I forgot to mirror it and had to recut….ugh!
For HTV we prefer HTV Anything. This video was made before we invented HTV Anything and the materials are a touch different now, such as HTV Anything is thinner and easier to work with, which is why we invented it :-) -TRW Crystal
What setting can I use to cut the bling anything material in cricut maker?
We set our settings to "Fabric"
-TRW Bri
U rock 🤙🏼🤙🏼🤙🏼
Lucy, No! You Rock!
I heard Ass Mat instead of Ask Mat 🤣
Notime, LOL, That's just wrong.
TheRhinestoneWorld . I know lol 🙉. Love all of TRW’s videos though !!
Heat
Since then we've developed HTV Anything and have reserved Bling Anything for stones only. :-)
-TRW Crystal