@@submittedbymail We have tons of great tutorials we share here and on our social media platforms. Do you come to our weekly Live trainings? Every Monday night at 8pm here on our RUclips channel. Hope you can join us! -TRW Pilar
Yay! We love to hear that! So glad you found us, we have thousands of tutorial videos and live trainings every Monday night at 8pm EST. Hope you can join some time :) -TRW Erika
I'm right in the middle of a big job making a four-color vinyl logo for a service van, and I've been racking my brain trying to figure out hw to align everything just right without wasting too much vinyl, and after watching this video, I can now get to work knowing I can pull it off perfectly! Thanks for sharing!
Glad it was helpful! We are huge fans of parchment paper in between layers. You can see through it and it gives so much freedom to slide the colors around until they're juuuust right! -TRW Crystal ******Did you know? >We're LIVE -- EVERY Monday night at 8pmEST on our RUclips channel! >>We TEACH how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. >>>You can hang out, ask QUESTIONS and have FUN as we go! >>>>We also offer tiers of paid MONTHLY subscriptions that have a variety of PERKS, sneak PEEKS, extra TRAINING, free DESIGNS, first DIBBS on new products, extra COUPONS, and FONTS all depending on the tier level selected!
So I have a free tip for everyone that’s simply amazing. Instead of using parchment paper you cut two pieces of Frisco Craft transfer paper cut to the same size. Combine the two sticky sides together and now you can clearly see where the vinyl needs to be placed. The outside of the transfer paper is silicone like and the vinyl won’t stick. Like I said AMAZING
Thank you very much for all the information that you are passing on to others in this hobby / small business. I am just getting started and just the first three videos that I stumbled on by you has already cleared up and simplified working with vinyl stickers. Thank you again.
That's awesome! Education is very important to us and we love to share our hacks and knowledge to help others out. We also have a free Live training on our RUclips channel every Monday night at 8pm EST. This week is cancelled, due to the holiday. But I hope you'll be able to join us next Monday night! Let us know if you have any questions and we are happy to help you out. :) -TRW Pilar
Awesome! Thank you so much for this tip, as it makes doing layered vinyl designs so much more less intimidating. I have your products so I’m excited to try this method! Thanks again.💕
Thats wicked! What an awesome way to do a layered sticker. Really appreciate the tutorial. I have to try this with a 24x24" sticker now. Appreciate the tutorial!
Welcome to the Crew! We love sharing tips and tricks, you'll find so many more on our channel, and we're here if you have questions as well! -TRW Crystal
You can do it! This is one of our very fave hacks, Matt uses parchment for nearly everything :-) -TRW Crystal ******Did you know? ~We're live EVERY Monday night at 8pmEST on our RUclips channel! ~~We teach how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live. ~~~You can hang out, ask questions and have fun as we go! ~~~~We also offer tiers of paid MONTHLY subscriptions that have a variety of perks, sneak peeks, extra training, free designs, dibs on new products, extra coupons, and fonts depending on the tier level selected!
Glad it was helpful! We have thousands of other guides on our channel :-) -TRW Crystal ***We're LIVE every Monday night 8pmEST with free training and giveaways on our channel! To join, hit subscribe and click the chat button. Winners are chosen randomly from comments during the live!
This is awesome 😎 I just discovered your channel and plan on watching many of your tutorials. Thank you for the coupon code. I definitely want to get this SVG and your ruler tool that you used.
Thank you! We absolutely Love sharing our hacks to help others. We also give away free designs every day--do you come to the site to get yours? They're svg files, so they can be used in any vinyl cutter's software. :) -TRW Pilar
Amazing tips. I really liked it and I will. Thank you for sharing a wonderful tip. I would like to see how you designed it or how you did the color separation or what software was used.
Thanks so much! We have a ton of different videos on designing and software. If you'd like, send an email over to info@therhinestoneworld.com and we can send back some video recommendations for you! 😊 - TRW Haley
Hello and love yalls channel. I recently bought a cameo 4. I don't know a thing about it. I did some free learning in Silhouette America but since I found this channel It helps tremendously. I just want to make things for family and friends as gifts. I have a BIG family I cant wait to get the hang of it. Is there some video yall have out there I could learn from?
Absolutely fantastic video, mega useful and helpful, thank you, please may I ask a quick question. Is it possible to fold a sticker around a light box that has curved/smoothed corners.? Thank you 🙏
It's difficult to get the adhesive to stick properly once folded. It's recommended just to cut the corner apart and line up each side as close as possible! -TRW Bri
Glad you enjoyed it!! :-) -TRW Crystal **DID YOU KNOW that we're LIVE on our RUclips channel every Monday night at 8pmEST!!! We host FREE training and some pretty awesome GIVEAWAYS! Hope to see you there!
Thanks! Glad you found us! No, it's a different technique because we aren't using transfer tape. You might find this tutorial helpful: ruclips.net/video/KmOnKCB7ThQ/видео.html -TRW Erika
If you use parchment paper, it helps a Lot. Yes, start with the top layer...leave just a tiny edge free so that you can have a hinge to be able to pull the parchment paper out. :) -TRW Pilar
Try using registration marks on each layer as a guide or our parchment paper trick! See what I mean at the 3:37 mark in this other video of ours: ruclips.net/video/DVBI2DSk4VI/видео.html -TRW Crystal
This is one of the designs we have on our website, ready to cut. If you're wanting to create your own designs, it'll depend on which software you use. Not all software has advanced designing tools. We use CorelDraw with our TRW Design Wizard to create all of our designs. Which software are you using? -TRW Pilar
Good question! No, there's no need to layer like this with htv. It's not possible as each color has it's own carrier sheet and they'd just stack on top of each other instead of pressing to the shirt aside from the bottom layer. How we get great presses with multiple htv is by doing a tack press on each color, then a final press at the end. A tack press is a short few second press, let it cool, peel the carrier carefully, line up next color, repeat, then a final long press at the end. This is because of shrinkage. If you notice your multiple colors etc just won't line up, this is what's happening. The prior layers are shrinking a few mm and that throws off your alignment. Here's a good example of tack pressing: ruclips.net/video/UPCQBl0hqGQ/видео.html -TRW Crystal
That's amazing but my question is how do you cut the decal itself? By that I mean the actual dimensions that the cutter will cut. I'm sorry if it's a stupid question. Just new to this.
No such thing as a stupid question, we love helping :-) You download a file (or, svg), and then if needed split your colors apart, load the vinyl you'll need first into the cutter, cut, then weed it, repeat for the other colors, and layer :-) -TRW Crystal
Our software color separates the design and makes the templates for us. We use the TRW Design Wizard in CorelDraw Graphics Suite. We have weekly free Live Trainings here on our RUclips channel every Monday night, starting at 8pm EST. Hope you can join us tonight! -TRW Pilar
I do the same thing. I don't use tape though, it slips off of the slick backing and sometimes pops up anyway. What you need to try - cut your design and there's always scrap vinyl you're going to weed off. Leave yourself a little extra and cut it into strips. Or use an ugly color and cut some strips from that. Fold the end of the strip over a little and stick it to itself like a tab. Use those to hold your decal down since it sticks to the slick backing much better. ;-) -TRW Crystal
As someone in the game with many years of experience this is the most expensive experience way of doing such a graphic. Suppliers sell on meterage so add the colours together for that, then add production time, costs of wasting app tape etc to do the layers etc when one print can achieve it all and you are losing money.......
He's not wasting app tape, it's only being used once to put all the colors on. He's using the backing from hot fix tape (usually thrown away) to be able to see to line up. Registration marks waste vinyl (especially when you when you have small, different colored pieces). I make a profit every time I do multiple colored decals & I've been using this method for at least 2 years.😊
Pytrice Williams not sure of size and I am in Oz, but I would knock that out on a printer (stacked with other jobs) for a few cents and be able to sell it as a profile cut laminated sticker for a lot more than what layers would cost. Then add the time to on the PC to set up the artwork, cut the various layers, weed them etc blah etc to that. If your in the USA that is a whole different market, as I experienced spending a few months at friends sign and graphics shops whilst there on travels a few years ago. And, on top of that a layered small decal like this will look like crap when it is stuck to something as the numerous edges will get dust and look even worse after a few weeks.
Correct, Our software actually auto color separates and creates registration marks for multi-color designs if needed. As for the Print/Cut like a Roland Verscamm they are for the established businesses costing upwards of 15K+. This video is geared more towards the startup businesses to help grow. Thanks for watching and the valuable comment to help. Matt
For HTV you'll cut all of your colors one by one, then place the bottom layer on the shirt, a fast 5 second tack press, peel carrier, then do the same with the next layers until you reach the last one. Full press at the end. -TRW Crystal
I wonder if this would work to layer htv before you press it on a garment. 🤔 I'll have to try this. Could help with lining things up and avoiding shrinkage issues.
Im a week into owning a cricut and this tutorial...has just saved me!
Glad we could help! :)
-TRW Bri
Yeah you did!
@@submittedbymail We have tons of great tutorials we share here and on our social media platforms. Do you come to our weekly Live trainings? Every Monday night at 8pm here on our RUclips channel. Hope you can join us! -TRW Pilar
You never hear a man say "I'm ready to committ" so confidently! Lol, thanks for the video. You're a genius
Anytime! Glad you enjoyed.😊
-TRW Mireya
Used this, works like a charm! And I am a total newbie to vinyl. You did an awesome job demonstrating!
I'm glad we could help! Let me know if you have any questions about anything else :)
-TRW Bri
😱 thank you! I’ve been so intimidated on doing multi colored decals.
Thank you for watching Stephanie.D!
Thank you, sir! 3 days in to owning the maker and layering just got waaay easier!
Great to hear! -TRW Crystal
You just saved my sanity in layering!! thank you thank you !!
Yay! We love to hear that! So glad you found us, we have thousands of tutorial videos and live trainings every Monday night at 8pm EST. Hope you can join some time :)
-TRW Erika
Love doing multi colored decals this way. Saves so much vinyl, especially with small pieces.
You're absolutely right! I'm glad you enjoyed the tip/trick. Thank you so much for watching, and for your continued support! -TRW Caroline
I'm right in the middle of a big job making a four-color vinyl logo for a service van, and I've been racking my brain trying to figure out hw to align everything just right without wasting too much vinyl, and after watching this video, I can now get to work knowing I can pull it off perfectly! Thanks for sharing!
Awesome, Joseph! We're so happy to hear that you found this video helpful.
- TRW Haley
This is the best system of all. You save both time and money.
Yes. Here at TRW , we try to find ways for you to save time and money by achieving the best results for your business. Thanks for watching. -TRW Tanyu
I was hoping to see the kinda vinyl hack about not using registration marks… great vídeo busy the way. Thank you
Glad it was helpful! We are huge fans of parchment paper in between layers. You can see through it and it gives so much freedom to slide the colors around until they're juuuust right!
-TRW Crystal
******Did you know?
>We're LIVE -- EVERY Monday night at 8pmEST on our RUclips channel!
>>We TEACH how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live.
>>>You can hang out, ask QUESTIONS and have FUN as we go!
>>>>We also offer tiers of paid MONTHLY subscriptions that have a variety of PERKS, sneak PEEKS, extra TRAINING, free DESIGNS, first DIBBS on new products, extra COUPONS, and FONTS all depending on the tier level selected!
So I have a free tip for everyone that’s simply amazing. Instead of using parchment paper you cut two pieces of Frisco Craft transfer paper cut to the same size. Combine the two sticky sides together and now you can clearly see where the vinyl needs to be placed. The outside of the transfer paper is silicone like and the vinyl won’t stick. Like I said AMAZING
Oh wow thank you for that great idea!
-TRW Maegan
This really helped. Thanks for the recommendation. I can hardly wait to get my equipment so I can try it out.
Glad it was helpful! We're Live every Monday 8pmEST on our youtube channel! Free trainings on materials and giveaways.
-TRW Crystal
You are awesome brother, very well explained. I love how you were straight to the point. Best wishes to you!!
We really appreciate that! We have about 3 thousand videos on our channel if you'd like to explore more, and we're here for questions :-) -TRW Crystal
Thank you very much for all the information that you are passing on to others in this hobby / small business. I am just getting started and just the first three videos that I stumbled on by you has already cleared up and simplified working with vinyl stickers. Thank you again.
That's awesome! Education is very important to us and we love to share our hacks and knowledge to help others out. We also have a free Live training on our RUclips channel every Monday night at 8pm EST. This week is cancelled, due to the holiday. But I hope you'll be able to join us next Monday night! Let us know if you have any questions and we are happy to help you out. :) -TRW Pilar
OMGOODNESS!!! I will NOW not be afraid to try MORE Layering Decals!! Thank You SO MUCH!!
I bet they'll look great :)
-TRW Bri
Awesome! Thank you so much for this tip, as it makes doing layered vinyl designs so much more less intimidating. I have your products so I’m excited to try this method! Thanks again.💕
You're right, getting the pieces to match up can be a bit tedious. I'm glad we could help! :)
-TRW Bri
Thats wicked! What an awesome way to do a layered sticker. Really appreciate the tutorial. I have to try this with a 24x24" sticker now. Appreciate the tutorial!
Can't wait for you to try it! Thanks for watching.
-TRW Mireya
Just tried it Matt and it worked a treat 👍
Great to hear! Have you used this hack since then? -TRW Caroline
Came across your channel on TikTok. Love your videos, makes me want to get into making decals!!!
Once you start crafting and creating, you'll be addicted! 😍 Thanks for watching!
- TRW Haley
Absolutely genious! I hate doing multicolor with reg marks as I waste a lot of material.
Bigger designs will be tough to do this, but utter genious!
Awesome, we're so glad you found this video helpful! Give us a call if you run into any questions when trying this method.
- TRW Haley
Thank you so much for your time teaching us this hack!
You are so welcome! We have tons of other videos on our channel, and quite a few money saving tips as well :-)
-TRW Crystal
You make it look so easy.
Well it is easy with all the practice we've had! Thanks for watching!
-TRW Erika
Thanks for this video! Today is my first time layering - 4 colors - and this tip was super helpful!
You are so welcome!
- TRW Haley
Amazing timing for an order. Thank you so much the education and loads of tips.
Thank you for watching Karen Corrigan!
I have used this technique and it works great! Thank you for sharing.
I'm so glad you enjoyed it! Thank you for watching, and for your support! -TRW Caroline
I'm so glad you remade this video! Thank you!
Yaser K You're very welcome!
Great tutorial Matt! Parchment paper helped out a lot! Thanks!
I love that hack, too! You're very welcome 😊
- TRW Haley
4 years late on this video but the tip is still current!!
Welcome to the Crew! We love sharing tips and tricks, you'll find so many more on our channel, and we're here if you have questions as well! -TRW Crystal
Very nice. Thanks Matt. I love that trick
Thank you for watching Patricia Taylor!
Awesome nice video. I struggled with layering I’m definitely going to try this out.
You can do it! This is one of our very fave hacks, Matt uses parchment for nearly everything :-)
-TRW Crystal
******Did you know?
~We're live EVERY Monday night at 8pmEST on our RUclips channel!
~~We teach how to use our products, have some pretty awesome GIVEAWAYS (Even Cameos!), and if you hit subscribe (FREE!), it will open up the chat option during the live.
~~~You can hang out, ask questions and have fun as we go!
~~~~We also offer tiers of paid MONTHLY subscriptions that have a variety of perks, sneak peeks, extra training, free designs, dibs on new products, extra coupons, and fonts depending on the tier level selected!
Wow! This was great! Thanks, Matt!
Thank you for watching Bentley Manor!
Yep, you made that look simple!
Hi there,
Practice makes perfect! Thanks so much for watching.
- TRW Haley
OK, this is simply genius. I've been doing it wrong this whole time.
We’d love to experiment with different techniques and share our results to help you!😄
-TRW Pilar
That was worth the price of admission.
Check out our other hacks and tutorials! We have hundreds of videos to binge watch :-) -TRW Crystal
That’s an awesome videos, I’m currently starting to sell decals and to be honest this helps, cheers from the land down under
Glad to help! Best of luck to you with your business. ❤️️
- TRW Haley
So cool. Thank you for this simple tutorial!
You are so welcome! -TRW Crystal
Can’t wait to give it a try! You make it look so easy!
Practice makes perfect! Give it a shot! 🥰️
- TRW Haley
Absolutely amazing! Thank you for this tutorial!
Glad it was helpful! We have thousands of other guides on our channel :-)
-TRW Crystal
***We're LIVE every Monday night 8pmEST with free training and giveaways on our channel! To join, hit subscribe and click the chat button. Winners are chosen randomly from comments during the live!
That was pretty cool! Will definitely try it.
Awesome! We're here if you have questions! -TRW Crystal
Awesome technique
Thank you! 😊
- TRW Haley
This is awesome 😎 I just discovered your channel and plan on watching many of your tutorials. Thank you for the coupon code. I definitely want to get this SVG and your ruler tool that you used.
Awesome! Thank you! We hope the tutorials are helpful for you and your business. -TRW Tanyu
You make it look so easy!
Nothing to it. You can do it. Let's Gooo. Thanks for watching. -TRW Tanyu
OH MY GOODNESS!!!! You are AMAZING!! Thank you!!
You are so welcome! 😊
- TRW Haley
loving everything that you do
Wow, that looks easy!👏🏻👏🏻
It can be with practice! Thanks for watching Kathy McFadden!
Thanks again Matt! Great info.
Thank you for watching!
Great tutorial man, gonna try it with a complicated design wish me luck lol
You got this!!
- TRW Haley
Great explanation!
Glad you enjoyed it! We're here if you have questions.
-TRW Crystal
My US Cutter MH just came in. I hope it really is that easy
Good tip Matt thanks
I'm glad you enjoyed! Have you tried this tip out? Did you like it? -TRW Caroline
Amazing! I would like to see how you designed it, thank you！
Great idea for a video! 😊
- TRW Haley
Genius! Thanks for the tutorial, Sir.
I'm glad you liked it! Let me know if you have any questions. :)
-TRW Bri
Dude! This is awesome. Thank you so much for sharing.
It's our pleasure!! Thank you for watching 😊
-TRW Bri
I officially love you! Thank you for this vid!
No problem 😊
-TRW Mireya
Thanks!
This was so helpful. I'm just getting started and this gave me lots of info.
We're thrilled to help! Check out our channel, there's a gold mine of info :-) -TRW Crystal
Great job!!
Thank you! We absolutely Love sharing our hacks to help others. We also give away free designs every day--do you come to the site to get yours? They're svg files, so they can be used in any vinyl cutter's software. :) -TRW Pilar
Thank you so much for this tip. Love it.
You are so welcome! 😊
- TRW Haley
Awesome overview
Thank you! We're glad you enjoyed it! -TRW Crystal
Your the best matt!!!
Thank you for watching!
Thanks gonna give this a try
The parchment paper hack is a total game changer! -TRW Pilar
Dude! Thank you so much for this.
Thank you for watching!
Thanks matt
Thanks for watching Susie mills!
Amazing tips. I really liked it and I will. Thank you for sharing a wonderful tip. I would like to see how you designed it or how you did the color separation or what software was used.
Thanks so much! We have a ton of different videos on designing and software. If you'd like, send an email over to info@therhinestoneworld.com and we can send back some video recommendations for you! 😊
- TRW Haley
Very cool, thank you!!
Glad you liked it!
-TRW Crystal
We're LIVE every Monday night 8pmEST on our youtube channel with free training and giveaways!
Hello and love yalls channel. I recently bought a cameo 4. I don't know a thing about it. I did some free learning in Silhouette America but since I found this channel It helps tremendously. I just want to make things for family and friends as gifts. I have a BIG family I cant wait to get the hang of it. Is there some video yall have out there I could learn from?
Hey Sonia, we have loads of videos on RUclips! Filter it with Cameo 4 videos and you can always watch our Live Training's to help you out.
-TRW AL
still a great vid. thanks for sharing
Thanks for watching!
-TRW Bri
Amazing tip
Glad it was helpful! 🤗
- TRW Haley
Awesome hack!!!!
Pretty cool right! Time saver! -TRW Crystal
Great job. Thank you for the video!
Thanks for watching! -TRW Caroline
That's awesome! Thanks Brother
Thank you for watching Brien Watson!
Absolutely fantastic video, mega useful and helpful, thank you, please may I ask a quick question. Is it possible to fold a sticker around a light box that has curved/smoothed corners.?
Thank you 🙏
It's difficult to get the adhesive to stick properly once folded. It's recommended just to cut the corner apart and line up each side as close as possible!
-TRW Bri
Awesome! Thank you
You're welcome! Thank YOU for watching, and your support! We appreciate you :) -TRW Caroline
Smart. Thanks man.
We love sharing tips and tricks!
-TRW Crystal
Helped a lot. Thank you!
You're very welcome! Thank you for watching!
-TRW Bri
Wow. That is great. Thank you So much easier. ❤️🇨🇦
You are so welcome!
-TRW Kait
Perfect!
Glad you enjoyed it!! :-)
-TRW Crystal
**DID YOU KNOW that we're LIVE on our RUclips channel every Monday night at 8pmEST!!! We host FREE training and some pretty awesome GIVEAWAYS! Hope to see you there!
🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯😍😍😍😍 OMG!! BLESS YOU for Sharing THIS!!!!
The pleasure is ours :) Thank you for enjoying the video!
-TRW Bri
Extremely helpful!
Glad you think so!
-TRW Abby
this is a great tutorial- very clear how-to's. Do you use the same technique for HTV?
Thanks! Glad you found us!
No, it's a different technique because we aren't using transfer tape. You might find this tutorial helpful: ruclips.net/video/KmOnKCB7ThQ/видео.html
-TRW Erika
This is awesome!
Thank you so much! 😊
- TRW Haley
Super cool. Thanks
Thanks so much for watching!
-TRW Abby
Very helpful
Glad you think so! 😊
-TRW Kait
like that so ill try it when i get my cutter
Thanks for watching!
-TRW Abby
I still can't get it work so should I always start with the top layer 1st
If you use parchment paper, it helps a Lot. Yes, start with the top layer...leave just a tiny edge free so that you can have a hinge to be able to pull the parchment paper out. :) -TRW Pilar
@@TheRhinestoneWorld I will try again ty
Bruh this is genius!!!
Now how do I align cause I'm super bad!!
Try using registration marks on each layer as a guide or our parchment paper trick! See what I mean at the 3:37 mark in this other video of ours: ruclips.net/video/DVBI2DSk4VI/видео.html -TRW Crystal
@@TheRhinestoneWorld thank you!!! I really appreciate it! I'm so glad I'm a subscriber!
I need to know how to design the cut... This part is the easy part
This is one of the designs we have on our website, ready to cut. If you're wanting to create your own designs, it'll depend on which software you use. Not all software has advanced designing tools. We use CorelDraw with our TRW Design Wizard to create all of our designs. Which software are you using? -TRW Pilar
Can this be done with iron on as well? If so do you have a tutorial?
Good question! No, there's no need to layer like this with htv. It's not possible as each color has it's own carrier sheet and they'd just stack on top of each other instead of pressing to the shirt aside from the bottom layer.
How we get great presses with multiple htv is by doing a tack press on each color, then a final press at the end.
A tack press is a short few second press, let it cool, peel the carrier carefully, line up next color, repeat, then a final long press at the end.
This is because of shrinkage. If you notice your multiple colors etc just won't line up, this is what's happening. The prior layers are shrinking a few mm and that throws off your alignment.
Here's a good example of tack pressing:
ruclips.net/video/UPCQBl0hqGQ/видео.html
-TRW Crystal
That's amazing but my question is how do you cut the decal itself? By that I mean the actual dimensions that the cutter will cut. I'm sorry if it's a stupid question. Just new to this.
No such thing as a stupid question, we love helping :-) You download a file (or, svg), and then if needed split your colors apart, load the vinyl you'll need first into the cutter, cut, then weed it, repeat for the other colors, and layer :-) -TRW Crystal
Do you have a video how you made the decal in different colors?
Our software color separates the design and makes the templates for us. We use the TRW Design Wizard in CorelDraw Graphics Suite. We have weekly free Live Trainings here on our RUclips channel every Monday night, starting at 8pm EST. Hope you can join us tonight! -TRW Pilar
Great video!
Thanks for the visit!
-TRW Abby
See when I do that the piece I'm working on has to be taped down or it smacks up and ruins everything
I do the same thing. I don't use tape though, it slips off of the slick backing and sometimes pops up anyway. What you need to try - cut your design and there's always scrap vinyl you're going to weed off. Leave yourself a little extra and cut it into strips. Or use an ugly color and cut some strips from that. Fold the end of the strip over a little and stick it to itself like a tab. Use those to hold your decal down since it sticks to the slick backing much better. ;-)
-TRW Crystal
Amazing
Thank you for watching Pamela Wooten!
I have a question what is the best vinyl to use for car decals? Is there anything you can do to help them from fading out?
These are our favorite brand:
www.therhinestoneworld.com/colorspark-permanent
-TRW Crystal
Very helpful, thank you.
Glad it was helpful! Thanks for watching!
-TRW Abby
Rhinestone world maybe you can do a video using this method
Thanks for sharing!
-TRW Maegan
Awesome thx!!!
Happy to help! We have so many tips and tricks on our channel!
-TRW Crystal
As someone in the game with many years of experience this is the most expensive experience way of doing such a graphic. Suppliers sell on meterage so add the colours together for that, then add production time, costs of wasting app tape etc to do the layers etc when one print can achieve it all and you are losing money.......
And another tip is if you are doing it this way have rego marks to ensure you don’t eyeball to get perfect registration.....
He's not wasting app tape, it's only being used once to put all the colors on. He's using the backing from hot fix tape (usually thrown away) to be able to see to line up. Registration marks waste vinyl (especially when you when you have small, different colored pieces). I make a profit every time I do multiple colored decals & I've been using this method for at least 2 years.😊
Pytrice Williams not sure of size and I am in Oz, but I would knock that out on a printer (stacked with other jobs) for a few cents and be able to sell it as a profile cut laminated sticker for a lot more than what layers would cost. Then add the time to on the PC to set up the artwork, cut the various layers, weed them etc blah etc to that. If your in the USA that is a whole different market, as I experienced spending a few months at friends sign and graphics shops whilst there on travels a few years ago. And, on top of that a layered small decal like this will look like crap when it is stuck to something as the numerous edges will get dust and look even worse after a few weeks.
I'm in the USA. This method works better for me than using registration marks. We are all free to use whatever method we choose.
Correct, Our software actually auto color separates and creates registration marks for multi-color designs if needed. As for the Print/Cut like a Roland Verscamm they are for the established businesses costing upwards of 15K+. This video is geared more towards the startup businesses to help grow. Thanks for watching and the valuable comment to help. Matt
Thank you so much. God Bless
You are so welcome! 😊
- TRW Haley
Olá! Sabe me dizer como faço esse mesmo processo de camadas em vinil transfer, antes de estampar???
For HTV you'll cut all of your colors one by one, then place the bottom layer on the shirt, a fast 5 second tack press, peel carrier, then do the same with the next layers until you reach the last one. Full press at the end.
-TRW Crystal
I wonder if this would work to layer htv before you press it on a garment. 🤔 I'll have to try this. Could help with lining things up and avoiding shrinkage issues.
Sure, I don't see why that wouldn't work, too!
- TRW Haley