347 Stroker by Fox Lake Power Products
HTML-код
- Опубликовано: 16 сен 2024
- A time lapse build of the fox lake 347 stroker "street fighter" -
D.S.S. forged rotating assembly
Harland Sharp roller rockers
Cam motion custom cam
Edelbrock stage 2 port matched RPM aip gap intake
Edelbrock stage 2 "E street" by fox lake cylinder heads
Trick flow pushrods
Meziere water pump
Holley 750cfm ultra double pumper
Visit us at - www.foxlakeracing.com
Add us on facebook - / fox.lake.9
Shot and cut by Royal Bohemian Media 2012
Love this video and song. I play it often as a reminder of the best sbf engine builder around
Its yust very sexell the way it allgo,s tagerher so well. Nice one bothers
Super clean build, I can see why Fox Lake are so well respected. Even here in Australia they're known well amongst the Ford guys.
You Port the Will-Burt Fox lake Trick Flow Small Block Ford Cast Iron High Port Street Heat Heads
It's sad he closed the doors
Windsors kick ass, strap on a girdle though.
oil moving just fine.pass on the foam.
Ditch the choke horn , nice build ron !!
Uncle Ron is god mode
Very nice!
Thank you for the compliments. This is my motor,and if also filmed the video. Glad you enjoy. As far as horsepower. Stock ford 94-95 roller blocks are good for about 540 horse before they pop. The car it belongs in has never been dyno'd. This motor was built to have about 450-500 at the flywheel. On a carb. The car pulls extremely hard and the motor and car are currently daily driven and has never gone over 190 degrees in Florida heat.
so you have a fully built engine and daily drive it without a tune?? is that even possible? i just bought a m 90 mustang gt 5.0 fully roller engine and the car is not tuned yet and was wondering if i can still drive to the dyne shop without problems lol
Hai Alhuw yes i do daily drive it, its a car without a computer and runs with a carb - there is nothing to tune except the carb and regulator, and is and was tuned in 2 seconds flat. OF course you can drive your computer controlled '90 to the dyno with no tune. How is it not possible? Please stop acting like you know something, when you clearly dont. There is nothing BUT a carb to tune on a carb inducted motor, with this car, no computer to flash and OR code, no fuel parameters, no air velocity, nothing , its all jetting and tuning the carb to the motor, and is done in literally no time if you know what your doing.
+Hai Alhuw got rekt
scott blue question. I am currently installing a 347 in my 95 f150. This is the motor of a lifetime for me. I traded a motorcycle for it, which I had a good deal in. Otherwise I could never have or “would” spend this kind of money on a engine. I am a Law Enforcement Officer and cash isn’t just pouring out of my sock drawer, if you know what I mean. I have $11,500 in receipts from the previous owner. The engine has never been bolted into a vehicle. Dyno run only. 547HP and 502TQ at the flywheel. It’s EFI and I have purchased $2500 in accessories just getting it ready to put in the truck. 42lb injectors, 80mm MAF, 80mm BBK TB. 3200rpm stall, just on and on.
I am going to use this as a weekender. I have a patrol vehicle so I don’t need a vehicle for every day driving. I can do my errands in my patrol vehicle. However I plan on using this truck as an occasional driver. You know. Hardware store on weekends, Lowe’s trips, trash truck. My question is how has your experience with your Stroker been? Are they ok for driving “smoothly “ around town and on the highway? Anything I should no or expect?
ertren6 to answer your question I run 331 strokers due to less problems with powered breaks and compression. Cylinder walls are very thin on 347 stroker. So if you baby it you’d be good but having such a power little small block. It’s tempting to get on it. But you should be good watch the heat watch oil. Don’t it go over or under.
That is a work of art
Thank you :)
I've run a Holley 780cfm 3310-1 69 primaries, 78 secondaries on my 289 A code had to notch the pistons, put some ported J code heads on with bigger Ferrea valves, .551 net lift, sounds like NASCAR on the freeway.... lol
I would like it in my truck ,But looks like a FRAM oil filter on it
Fram is good for break-ins that's about it
well made video,it had me drooling over that motor.thats what every foxbody stang dreams of having between its fenders.If you ever need a test/ promotional stang to throw a motor my way and il trade you my left nut lol.nice job guys
You just can't blame Ford for building such killer motors! God bless GM!
get out traitor
That the best background music you could find. Turned video off half way through because of it.
I love you , keep watching.
very nice! awesome job man
thanks a bunch mang
well done my friend looks awesome.
they need to make SEE THREW valve cover's cause after market Roller rocker are sweet to look at. and would be sweet to see while the engine is running.
they have them already
MAN! I want that in my truck!!!
This is what I have been seeing in my dreams
Beast mode!!! 💯🤘
Rob Zombie - more human than human FTW!!!!
Oh yeah
badass!!! Fox lake does it again!
Does the 347 stroker use another existing crankshaft, like the 350/400 Chevy hybrid does, to make a 383?
It requires an aftermarket crank to make a 347.
@@radsdad1, thanks bud.
DSS custom cut forged crank
FORD POWER !!!!!!
enjoy retirement
oh well this 347 stroker is beautiful nonetheless, whoever owns it is a happy camper.
She is a wild loose beast these days.. re-homed to another racer and unfortunately he passed away walking to the car on race day.
last known location of car was clearwater Florida, motor still in it last I heard.
the movement at 2:08 was the coolest thing i have ever seen... ever. and i have watched a lot of porn and gopro videos.
Thank you! From the director ;)
hydraulic cam?
only thing i don't like about this is the orange oil filter... lol but other than that it is a really good video! i like it! keep it up!
That fram large oil filter is recommended to use during break in period on a new rebuild to remove contaminants.
Better to use a Wix filter
@@joshcaldwell1217 this man gets it
Do you guys do any EFI builds?
got a 347 efi that will fit in my 00 explorer?
What HP?
what cam do you recommend for 347 am confused
Like with any engine, it depends on the intended use. The specs of a cam determine how the engine behaves and even determine the final compression ratio.
mean!
You're gonna die if you keep breathing that cleaning solvent dispersed through an air hose.
ok what cubic inch can you take a 302 Ford to? just wondering
about 347 safely, thats 3.4 stroke, 30 over bores, and without a certain piston it has oiling issues, a dart block can be taken to about 363 because its a big bore. better to stay with a 331 for a street car (because of the issues with the 3.4 inch stroke in a short deck block) or go 351w according to some of the guys i have talked to.
+Spencer Hall cool thanks for the information, I guess I will take a 302 to 331 just to be safe
IDreamOfDragons O no problem man, if you don't already have the block, pan, distributor, and intake, I would go 351w since the block is capable of holding 700-750 at the crank rather than about 500, its already bigger than a stroked 302, and it has the ability to be bored and stroked to 427 I believe, dart block being capable of 461ci i think.
+Spencer Hall oh its probably going to be a aftermarket 302 block
how much power you want? naturally aspirated? wish I could afford a $2000 dart block
2:34 he put the oil filter on before the engine was in the car, thats a big no no, bet that oil filter got beat to death when they tried to put that 347 in something lol.
can't start the motor without an oil filter. if you watched the end they started it. you can drain the oil and take the filter off when you go to put it in the car.
+Tyler Cerbo ohhh i didnt watch till the end sorry haha
Why would one try starting a motor with out the filter. You do realize it would be a big ass oil clean up correct?
How do I contact?
www.foxlakeracing.com
E street heads? EEEKKKKK
super stock class
They make air. Port them.
nice video, music sucks.....
im so tired of hearing that fuccin song!!!
BenEnyuh you don’t like white zombie. Your crazy