Jump n Carry Charge Error 3 fixed for $1
HTML-код
- Опубликовано: 10 фев 2022
- Jump n Carry Charge Error 3 fixed for $1 I left my unit hocked up to a my ATV battery for couple days and forgot about it, when I finally remembered about it, I thought it was to late, it was completely dead and would no longer take charge, all I was getting was Charge Error 3, watch video to learn what I did to resolve this issue without taking the unit apart or replacing battery, now it works again
Хобби
For anyone looking to skip to the $1 fix, here it is: there is no $1 fix in this video. He just left it plugged in and it started working again after a while.
He also suggested using a professional car battery charger.
Hey I later learned these jump packs 660-770 have all cheap defective parts battery and the black box charger. I rebuilt all our shops chargers with better batteries and updated chargers. When you get these new they last about several chargers then die. Nice tutorial
Did you say you used this to charge your 4 wheeler battery overnight? It's not a charger at all. It's basically just used to jump start your vehicle.
I don't think those lil plates are metal that the positive clamp clamps on to .as soon as you switch the knob to the on position it wouldn'f spark like crazy right? I wonder what type of material is those lil plates.?
Same issue. Stuck around 10. Volts
I have brought some batteries back to life by putting the lm on a old school charger that doesn't turn off automatically on the highest setting and basically boiled the acid for a just a minute or two then put it on a trickle charger and it worked for another few years. It's kinda the same as deslufating the plates
I do similar thing with my charger, I give dead battery 200Amp boat for under 1 min and start charging, it might fail 2 to 3 times but then it works and I reviewed alloy of Batterys
So if the light Keep blinking Full it’s not working?
Most of my problems with this pack have been fixed by hooking the cables to a charger
er1 code. this thing was acting crazy, intermittent light and alarm also the read out was going nuts so I took it apart and it was slap full of bull ants. I cleaned it up good and it works fine. I wish I would have taken it apart before I ordered a new module and power supply first. I hope this may help someone else. Jim
You have some dead cells, itll drop to around 13v if one is bad, lower if more. Thats what happens when a battery gets damaged
The internal battery is too weak that’s why the volts were dropping when power cord was disconnected. At some point, the battery will need to be replaced.
Did you replace yours?