I have a Fomako system set up on my church. We use it to stream to FBLive and Zoom via OBS. We are having trouble getting the video and audio to sync on the live stream. Is there a better way to stream using ip camera setup to make sure audio and video sync up?
2:50 - is there a way to setup smoother transition? I.e. so that the time to change zoom takes the same time as changing angle? Or that the angle shift is performed with a more "curvy" path. And question #2 - is the camera capable of outputting video to multiple outputs at the same time, i.e. HDMI and LAN or SDI and LAN?
For your questions: 1) yes, you can set the preset P/T speed and preset zoom speed, normally, if the speed is slower, it looks more smoother 2) yes, it support HDMI, SDI and LAN video out at the same time.
About to have to have warranty service for the controller a second time. The controller has the same problem as the Nintendo Switch, after a few months the joystick starts to drift. This church only uses it on Sundays so it shouldn’t be going bad like that so fast. The other churches I play for have PTZ Optics controllers that have never had this issue. Is there a fix for this because I’m about to order another PTZ camera for another church and I don’t want them to have to keep getting another controller every 4 to 5 months. Please help with any solutions.
Hello, please can you help on how to get the preset speed. Like to make it really slow for a smoother transition when calling preset. For example moving from a camera call 1 to call 2. I cant seem to find the preset speed anywhere in the setting. I use the famako joystick with a zowietech ptz 20x zoom. Many thanks
The PTZ controller can't adjust the camera's preset speed. Your camera's brand is not FoMaKo. If you have a FoMaKo brand PTZ camera, you can set the PTZ camera's "Preset Speed = 1" in camera's menu setting or on remote control. then , you call the preset position from 1 to 2, the lens move speed will be very slow.
I have a fomako ptz camera FMK20SDIPRO. I am having trouble with it staying focus on a subject. We use it for a church service. The auto focus tends to constantly go out of focus and not got back into focus on the live stream. I have messed with the settings and nothing seems to work. Can you suggest anything or direct me to a page or information than can help calibrate the auto focus settings.
If have you done other settings, can't get back, please try to restore the camera to factory default for a test. you can also to go camera's webpage setting->video parameters-> focus, there are several focus mode to choose, such as: Front focus, behind focus, meeting, education, moving, center focus If still can't fix your problem, please write us , we will help you.
This video shows how to control the cameras. For live streaming sytem, please check our another video with HDMI video swither added: ruclips.net/video/SPB6x73oPX4/видео.html connect all cameras to FoMaK KC601 pro video switcher by HDMI cables, and use KC601 Pro's USB 3.0 video out to your computer. Of course, you can also record the video to HDD. You can also write to us directly, we will give you the detail solutions.
Hello, I have just added an 8th Fomako PTZ to our setup. I set it up on our KC608 controller. All the cameras have static IP addresses. I have a question. There are only 7 camera selection buttons available. What can I do to make the 8th camera easily selectable? Right now i have to press "CAMLIST" to pull up the list of cameras. Scroll all the way to the bottom with the joystick to select Camera 8. Is there a way to create a shortcut to the camera? Like using one of the function keys or some other method?
please go to controller's menu setting-> device management->add a new deivces , add the camea's IP address and RTSP URL , and save. now, you can Press "CAMLIST" button to choose the camera to control
@@fomako9778 Thank you, I had done that as I explained. My question was, is there any quicker way to select that camera, other than having to use CAMLIST to pull up the list and scroll all the way down to the last camera to select it? Can F1 or F2 be assigned to it? Or is faster way of selecting a camera that is #8 or higher from the keyboard? Other controllers allow you to type in the number of the camera as an option, press enter, and your there. Using CAMLIST and the joystick is too many steps. I have to press CAMLIST, move down on the joystick 8 times, then press its button to select my camera.
@@DocMicrowave At present, our keyboard has 7 shortcut keys for selecting the camera, which is the most. Most other PTZ controllers only have four shortcut keys. After entering the "Camera List", using the "Focus" knob to select camera is much more convenient than using Joystick. Hope that can help you.
@@fomako9778 Most other keyboard controllers (with 4 shortcuts) allow you to quickly select a camera by pressing a cam button, and punching the camera number. I think your older controller did that also. That would be the quickest way to select a camera that doesn't have a shortcut assigned. Maybe it is something Fomako could consider in the next firmware update.
We bought FoMaKo cam bundle for our church. I hooked it up to the controller and everything works using POE. I was told these were NDI compliant but cannot get them to show up when trying to setup OBS the model of camera is fmk20sdi pro. This is very frustrating, help because can't seem to contact the company
Dear Friend, Please confirm your cameras' model ID, FMK20SDI pro, it is no-NDI model; KN20A Pro, it is NDI model, the NDI model cameras printed NDI logo at front of the camera.
If I do not have internet connection, do I need the router, or am I good to go with the POE, since I am not transferring network from computer. Can I not just connect the camera and controller to a Gigabit Ethernet Switch? Or if I only have one camera, can I not just connect directly to the controller over cat 5 cable? Please help.
you can don't use router or network switch, you can use serial port to control the camera such as RS485, RS422. but i'm high recommend to add a router to you system, it will make your PTZ camera System much more easier and cleaner. use Network cable connect camera and controller to the same router, router will assign ip address for camera and controller. and your router doesn't need to connect to internet. For more details, please contact us directly.
normally, you need a computer to do live streaming , you can also use FoMaKo new released KC601 Pro HDMI video switch&recorder, record the video to U disk, then, you can upload the video at anywhere and anytime.
I tried to connect the Tenveo VL12U with zowietech controller by VISCA IP (with PoE by switch). I changed the IP's camera but i didnt find the default port.
Different brands' camera and controller maybe have compatibility Issues , please choose FoMaKo cameras and controller joystick, our PTZ camera system are optimized
Is it possible for that camera to activate when a person speaks? (Activate by voice). Example: Camera 1 is aimed at person A. Camera 2 is aimed at person B. When person A speaks, camera 1 should activate. When person B speaks, camera 2 should activate
Dear Friend, currently, the PTZ camera only has AI person/body tracking.Doesn't support AI voice tracking. because voice tracking is not exactly currently, such as distance, voice pickup quality, two more persons speaking, voice tracking speed ...
Hi I'm looking into purchasing your set up my question is can I buy 3 individual Cameras with Joystic console that will have each person operating separately by 3 people and I will link the shots to decide which one I want to be showing fading from Camera 1 to camera 2 or than camera 3 . ect.
Dear Friend, do you want to switch the cameras' video out ? if so, i think you need another device called video switch. The controller joystick only has PTZ control function. please email us for your detail demand, we will give you some suggestions.
All FoMaKo PTZ cameras' quality and functions are great, if you need the best one, i recommend the FoMaKo K820N, it is our newest 4K 60fps PTZ camera with powerful AI tracking function if you need the cost-effective ones, you can check FMK20SDI, KN20A , our all cameras are upgraded to Pro version (wish LCD screen), much more easier to integrate cameras to your network.
when cameras and controller are connected to router by network cable, router will assign IP address for them, then, you can use cameras' IP address to login cameras' webpage if you still can't login, please write to us.
@@eliasvaldes4596 The PTZ controller is a more effective and convenient control methods It does not affect the functionality of the camera. if the camera has tracking function, don't use PTZ controller, you can also active the camera's tracking function
having a issue with connecting my fomako controller to my fomako ptz cameras. The 3rd. number of the ip address is different than the one on the ptz cameras. how do I fix this?
Dear friend, please write to us directly, include the camera's IP address shown on camera's LCD screen, and take photo of controller's device list, we will check and help you to find out the problem.
You'd better get a router in the system. because the router can assign IP addresses for the cameras and controller automatically, It will make installation easier. If don't use router, you have to set the IP address, gateway, subnet mask for cameras, controller and computer, it is a very complex and error prone task.
you don't need connect the system to internet. you can connect all devices to PoE switch directly, but you have to change the devices IP address by manual, if you add a router to the system, router will assign ip address for the devices. And router doesn't need connect to internet.
Dear Friend, most PTZ cameras don't have built-in microphone fuction, becausethe PTZ camera will be mounted a little far from the speaker, so, you need use your audio system or external microphone
@@julelyle yes, you can connect your audio system or microphone to camera's line-in. but please note that camera's line-in port doesn't have power function, your audio system or microphone must have power supply or built-in batteries.
yes, it is ok. If your video switcher has HDMI or SDI video in , you can use the camera's HDMI/SDI video out to the video switcher. Please note: our 4K camera's HDMI default video out is 4K 60fps, if your video switcher doesn't support 4K 60fps, you should change camera's resolution to 1080P 60fps.
Preview screen worked fine for a couple of days now the preview screen is just blue when I hit preview. Everything else works fine. Any suggestions would be appreciated.
Dear Friend, please connect cameras and controller to the same router, router will assign IP address for them. if still can't work, please write to us, we will help you to find out the problem.
Thank you for your immediate reply on my comment. which country are you from? How long will it takes to get this item if I purchase it to your company. Tnx
@@djrhedcarriedo5437 we have stocks in many countries, such as USA, UK, JP, CA, DE, FR, IT... , if ship to Philippines, we will ship from Hongkong or China
I have a Fomako system set up on my church. We use it to stream to FBLive and Zoom via OBS. We are having trouble getting the video and audio to sync on the live stream. Is there a better way to stream using ip camera setup to make sure audio and video sync up?
Our PTZ controller support Visca over IP(Sony Visca) and Onvif network PTZ control protocol, please check your camera's support if this model supports these PTZ control protocol.
each camera has live streaming function. the PTZ camera controller only has PTZ control function. If you need a video switcher with live streaming function, please check FoMaKo KC601 Pro in this video: ruclips.net/video/SPB6x73oPX4/видео.html
Dear Friend, It is very easy, you just need FoMaKo PTZ cameras, controller joystick, and router, computer, if have more than one cameras, you'd better get a video switch, then your live streaming system setup finished.
@@PoxyBear yes, that's right. cameras connect to switch, switch connect to router. It is the best way. Router is very important, it will assign ip addresses for cameras and PTZ controller automaticly, then, don't need do any settings on computer. Save 20+ steps to setup the system.
no, router doesn't need to be connected to internet. Router just assign IP address for cameras, Controller and computer, then, you don't need set ip addresses for them one by one, much more eaiser to setup the PTZ camera system
@@kaczuchasly5174 yes, if you want to use camea's IP stream function to stream to RUclips, facebook... directly, you'd better let router assign ip address for the camera.
your can use the cameras as conference camera, it has USB 3.0 video out, computer and conference software can recognize it automatic, but the camera doesn't have recording function, you can use other streaming software (such as OBS) to record and save to computer directly.
it depends on which cameras do you want to use, 1080P or 4K, 20x or 30x optical zoom, if you know how to choose, please contact FoMaKo, We can help you make the decision .
i think youtube don't allowed to post link directly, please go to Amazon and search "FoMaKo PTZ Controller" , by the way, it is a PTZ camera controller, not a video switcher
Did you purchase the camera two years ago? If so, please contact us through our official website, We will help you check if there are any new update for your camera.
NDI is one of the streaming method, it has eaiser settings and lower latency. if you get the no-NDI version camera, you can also setup great live streaming system.
several ways to connect to computer: 1)visit camera's IP address in web browser 2) USB 3) stream to software such as OBS, Vmix 4) use Video mixer switcher 5) If you use HDMI or SDI, you can also use HDMI to USB , SDI to USB video capture card
KC608N is the NDI version of KC608 Pro KC608N has NDI control protocol , it can control NDI PTZ cameras by NDI control protocol; KC608 Pro will use Visca over IP(Sony Visca), Onvif protocol to control PTZ cameras.
I love the background music 🎶
I have a Fomako system set up on my church. We use it to stream to FBLive and Zoom via OBS. We are having trouble getting the video and audio to sync on the live stream. Is there a better way to stream using ip camera setup to make sure audio and video sync up?
Thanks for ordering FoMaKo PTZ camera system.
for the sync problem, please check OBS Audio mixer , to set the sync offset.
2:50 - is there a way to setup smoother transition? I.e. so that the time to change zoom takes the same time as changing angle? Or that the angle shift is performed with a more "curvy" path.
And question #2 - is the camera capable of outputting video to multiple outputs at the same time, i.e. HDMI and LAN or SDI and LAN?
For your questions:
1) yes, you can set the preset P/T speed and preset zoom speed, normally, if the speed is slower, it looks more smoother
2) yes, it support HDMI, SDI and LAN video out at the same time.
About to have to have warranty service for the controller a second time. The controller has the same problem as the Nintendo Switch, after a few months the joystick starts to drift. This church only uses it on Sundays so it shouldn’t be going bad like that so fast. The other churches I play for have PTZ Optics controllers that have never had this issue. Is there a fix for this because I’m about to order another PTZ camera for another church and I don’t want them to have to keep getting another controller every 4 to 5 months. Please help with any solutions.
Hell friend, please write to us directly, we will help you to fix the problem.
Hello, please can you help on how to get the preset speed. Like to make it really slow for a smoother transition when calling preset. For example moving from a camera call 1 to call 2. I cant seem to find the preset speed anywhere in the setting. I use the famako joystick with a zowietech ptz 20x zoom. Many thanks
The PTZ controller can't adjust the camera's preset speed.
Your camera's brand is not FoMaKo.
If you have a FoMaKo brand PTZ camera, you can set the PTZ camera's "Preset Speed = 1" in camera's menu setting or on remote control.
then , you call the preset position from 1 to 2, the lens move speed will be very slow.
I have a fomako ptz camera FMK20SDIPRO. I am having trouble with it staying focus on a subject. We use it for a church service. The auto focus tends to constantly go out of focus and not got back into focus on the live stream. I have messed with the settings and nothing seems to work. Can you suggest anything or direct me to a page or information than can help calibrate the auto focus settings.
If have you done other settings, can't get back, please try to restore the camera to factory default for a test.
you can also to go camera's webpage setting->video parameters-> focus, there are several focus mode to choose, such as:
Front focus, behind focus, meeting, education, moving, center focus
If still can't fix your problem, please write us , we will help you.
I need a 4 cam system to make multicam videos. What’s easiest equipment , workflow to use ?
This video shows how to control the cameras.
For live streaming sytem, please check our another video with HDMI video swither added:
ruclips.net/video/SPB6x73oPX4/видео.html
connect all cameras to FoMaK KC601 pro video switcher by HDMI cables,
and use KC601 Pro's USB 3.0 video out to your computer.
Of course, you can also record the video to HDD.
You can also write to us directly, we will give you the detail solutions.
Hello, I have just added an 8th Fomako PTZ to our setup. I set it up on our KC608 controller. All the cameras have static IP addresses.
I have a question. There are only 7 camera selection buttons available. What can I do to make the 8th camera easily selectable?
Right now i have to press "CAMLIST" to pull up the list of cameras. Scroll all the way to the bottom with the joystick to select Camera 8.
Is there a way to create a shortcut to the camera? Like using one of the function keys or some other method?
please go to controller's menu setting-> device management->add a new deivces ,
add the camea's IP address and RTSP URL , and save.
now, you can Press "CAMLIST" button to choose the camera to control
@@fomako9778 Thank you, I had done that as I explained.
My question was, is there any quicker way to select that camera, other than having to use CAMLIST to pull up the list and scroll all the way down to the last camera to select it?
Can F1 or F2 be assigned to it? Or is faster way of selecting a camera that is #8 or higher from the keyboard?
Other controllers allow you to type in the number of the camera as an option, press enter, and your there.
Using CAMLIST and the joystick is too many steps. I have to press CAMLIST, move down on the joystick 8 times, then press its button to select my camera.
@@DocMicrowave At present, our keyboard has 7 shortcut keys for selecting the camera, which is the most.
Most other PTZ controllers only have four shortcut keys.
After entering the "Camera List", using the "Focus" knob to select camera is much more convenient than using Joystick.
Hope that can help you.
@@fomako9778 Most other keyboard controllers (with 4 shortcuts) allow you to quickly select a camera by pressing a cam button, and punching the camera number. I think your older controller did that also. That would be the quickest way to select a camera that doesn't have a shortcut assigned.
Maybe it is something Fomako could consider in the next firmware update.
@@DocMicrowave Thanks for your suggestion , i will report to our R&D team, thanks again!
We bought FoMaKo cam bundle for our church. I hooked it up to the controller and everything works using POE. I was told these were NDI compliant but cannot get
them to show up when trying to setup OBS the model of camera is fmk20sdi pro. This is very frustrating, help because can't seem to contact the company
Dear Friend,
Please confirm your cameras' model ID,
FMK20SDI pro, it is no-NDI model;
KN20A Pro, it is NDI model,
the NDI model cameras printed NDI logo at front of the camera.
If I do not have internet connection, do I need the router, or am I good to go with the POE, since I am not transferring network from computer. Can I not just connect the camera and controller to a Gigabit Ethernet Switch? Or if I only have one camera, can I not just connect directly to the controller over cat 5 cable? Please help.
you can don't use router or network switch, you can use serial port to control the camera such as RS485, RS422.
but i'm high recommend to add a router to you system, it will make your PTZ camera System much more easier and cleaner.
use Network cable connect camera and controller to the same router, router will assign ip address for camera and controller. and your router doesn't need to connect to internet.
For more details, please contact us directly.
Hello for a livestream with this one camera would I need a computer to connect it to?
normally, you need a computer to do live streaming ,
you can also use FoMaKo new released KC601 Pro HDMI video switch&recorder,
record the video to U disk, then, you can upload the video at anywhere and anytime.
@@fomako9778 thanks and also in order to save the livestream, I must have the U disk or just the computer?
Hola, he instalado todo con cat6, el controlador ya ve a las cámaras pero no las mueve, su ayuda por favor
Dear Friend, please write to us directly, we will try to find out the problem for you.
I tried to connect the Tenveo VL12U with zowietech controller by VISCA IP (with PoE by switch). I changed the IP's camera but i didnt find the default port.
Different brands' camera and controller maybe have compatibility Issues ,
please choose FoMaKo cameras and controller joystick, our PTZ camera system are optimized
Im having some trouble with the keyboard, after connect the cameras I can’t control them or showing in preview mode
please write to us directly, we will help you to find out and fix the problem.
Is it possible for that camera to activate when a person speaks? (Activate by voice).
Example: Camera 1 is aimed at person A. Camera 2 is aimed at person B. When person A speaks, camera 1 should activate. When person B speaks, camera 2 should activate
Dear Friend, currently, the PTZ camera only has AI person/body tracking.Doesn't support AI voice tracking. because voice tracking is not exactly currently, such as distance, voice pickup quality, two more persons speaking, voice tracking speed ...
@@fomako9778 Thank you!
Hi I have a question, can I connect an external monitor? Thank you and blessings.
Dear Friend, currently, the controller can't connect to an external monitor.
@@fomako9778 thanks for answering God bless you
Are they good in low light condition? What about the sensor? Do you offer discounts to purchase more than one camera?
the performance in low light condition is ok.
yes, we will give you some discount
Hi I'm looking into purchasing your set up my question is can I buy 3 individual Cameras with Joystic console that will have each person operating separately by 3 people and I will link the shots to decide which one I want to be showing fading from Camera 1 to camera 2 or than camera 3 . ect.
Dear Friend, do you want to switch the cameras' video out ?
if so, i think you need another device called video switch.
The controller joystick only has PTZ control function.
please email us for your detail demand, we will give you some suggestions.
What is the best quality ptz camera from Fomako?
All FoMaKo PTZ cameras' quality and functions are great,
if you need the best one, i recommend the FoMaKo K820N,
it is our newest 4K 60fps PTZ camera with powerful AI tracking function
if you need the cost-effective ones, you can check FMK20SDI, KN20A , our all cameras are upgraded to Pro version (wish LCD screen),
much more easier to integrate cameras to your network.
@@fomako9778 how I can order to UK?
@@kaczuchasly5174 please go to Amazon UK, search FoMaKo, we have stocks in UK local, thank you very much!
To get the access to the wed page the router need to be connected to the wed page
when cameras and controller are connected to router by network cable,
router will assign IP address for them,
then, you can use cameras' IP address to login cameras' webpage
if you still can't login, please write to us.
@fomako9778 question the tracking is only available when the camaras and the controller are connected right??
@@fomako9778 the auto tracking
@@eliasvaldes4596 The PTZ controller is a more effective and convenient control methods
It does not affect the functionality of the camera.
if the camera has tracking function, don't use PTZ controller, you can also active the camera's tracking function
@fomako9778 how i can no see that in the menu ??
having a issue with connecting my fomako controller to my fomako ptz cameras.
The 3rd. number of the ip address is different than the one on the ptz cameras. how do I fix this?
Dear friend, please write to us directly, include the camera's IP address shown on camera's LCD screen, and take photo of controller's device list, we will check and help you to find out the problem.
simples e perfeito, obrigado pela explicação, abraços do brasil
Welcome, friend!
Is the router needed? Is a switch just needed to connect the PTZ cameras to the controller?
You'd better get a router in the system.
because the router can assign IP addresses for the cameras and controller automatically,
It will make installation easier.
If don't use router, you have to set the IP address, gateway, subnet mask for cameras, controller and computer,
it is a very complex and error prone task.
@@fomako9778 Thank you for the reply, any specific router? Just any wireless router?
@@tsproav Just use a regular router is ok.
Do I have to be connected to the internet to make this work. Can I just connect the cameras and controller to a POE switch and be good to go?
you don't need connect the system to internet.
you can connect all devices to PoE switch directly, but you have to change the devices IP address by manual, if you add a router to the system, router will assign ip address for the devices.
And router doesn't need connect to internet.
Can these cameras be mounted on a celing ? Does it come with brackets. ?
Dear Friend, yes, the two models in the video come with ceiling and wall mounting brackets, you can mount on the ceiling.
Can you turn off the beep? Each time you press a button it makes a loud beep.
yes, please go to controller's "setting-> Beep" to turn on/off, and there are three beep styles to choose.
What’s the point of the network router? U have a Poe switcher. There is no need for it for extra stuff
router used to assign IP addresses for the devices,
if you are professional at network, of course can remove router and do network settings by manual.
Does it capture audio too?
Or do I have to run the audio from the mixer directly to my computer?
Dear Friend, most PTZ cameras don't have built-in microphone fuction,
becausethe PTZ camera will be mounted a little far from the speaker,
so, you need use your audio system or external microphone
Ok. Thank you
Wait,
Can I run the audio through there using the "line in"?
@@julelyle yes, you can connect your audio system or microphone to camera's line-in.
but please note that camera's line-in port doesn't have power function,
your audio system or microphone must have power supply or built-in batteries.
Ok, thank you for sharing this info with me
Would you be kind to share setup configuration with YoloBoc Pro
Dear Friend, Use HDMI cable connect our cameras to YoloBoc Pro's HDMI-in port is ok.
I plan to use PTZ to live feed an event by connecting the cameras to a stand alone video switcher. Can it be used without the router and PC..?
yes, it is ok.
If your video switcher has HDMI or SDI video in , you can use the camera's HDMI/SDI video out to the video switcher.
Please note: our 4K camera's HDMI default video out is 4K 60fps, if your video switcher doesn't support 4K 60fps,
you should change camera's resolution to 1080P 60fps.
@@fomako9778
Thank you very much. Really appreciate that.
Can you mute the beep sound?
yes, please go to controller's settings -> beep-> enable to off
Preview screen worked fine for a couple of days now the preview screen is just blue when I hit preview. Everything else works fine. Any suggestions would be appreciated.
Nevermind somehow I just figured it out, preview screen is back up. I think it had to do with RTSP Authentication then reboot.
@@ryannrjohnson that's right, the preview use RTSP streaming, so, you need enable RTSP for the camera.
Hello. Im from Mexico. How can I purchase this setup?
yes, it is ok.
you can order from our USA Amazon store, it can ship to Mexico, thanks!
Does it need Gloves to operate !!!
No, doesn't need ,Wearing gloves is only for the video effect 🤩
My Fomako controller is not showing the ip addresses of my Fomako cameras and controller.
Dear Friend, please connect cameras and controller to the same router, router will assign IP address for them.
if still can't work, please write to us, we will help you to find out the problem.
My auto focus is going crazy, how do I fix it, manual mode won't work either.
Dear Friend, please write to us, We'll show you how to correct the focus.
Are these cameras also suitable for podcasting?
yes, our cameras are professional for podcasting.
Do you have any supplier here in the Philippines, I need to upgrade need something like this.
Dear Friend, currenlty, we don't have local supplier in your country, pleas write to us directly, we will help you.
Thank you for your immediate reply on my comment. which country are you from? How long will it takes to get this item if I purchase it to your company. Tnx
@@djrhedcarriedo5437 we have stocks in many countries, such as USA, UK, JP, CA, DE, FR, IT... , if ship to Philippines, we will ship from Hongkong or China
I have a Fomako system set up on my church. We use it to stream to FBLive and Zoom via OBS. We are having trouble getting the video and audio to sync on the live stream. Is there a better way to stream using ip camera setup to make sure audio and video sync up?
Is this compatible with Marshall CV605-U3 ???
Our PTZ controller support Visca over IP(Sony Visca) and Onvif network PTZ control protocol,
please check your camera's support if this model supports these PTZ control protocol.
Can be integrated to OBS Application?
yes, it is ok , more detail please write to us directly
Cómo arreglar......
El Zoom más suave 👍
What kind of POE switch works best with the cameras?
Please try TP-Link PoE swtich is ok, cheap and works great. The PoE switch in our office works for two more years without any problem.
Can this be used for broadcast live streaming
each camera has live streaming function.
the PTZ camera controller only has PTZ control function.
If you need a video switcher with live streaming function, please check FoMaKo KC601 Pro in this video:
ruclips.net/video/SPB6x73oPX4/видео.html
I want to do it same thing in my Church but no idea plz help me
Dear Friend,
It is very easy, you just need FoMaKo PTZ cameras, controller joystick, and router, computer,
if have more than one cameras, you'd better get a video switch,
then your live streaming system setup finished.
Is it the same settings applicable with only one camera?
Yes, it is the same too. Just connect camera and controller to the router is ok. Don't need do any settings on computer. Very convenience.
@@fomako9778 Always best to connect to the network switch instead.
@@PoxyBear yes, that's right.
cameras connect to switch, switch connect to router.
It is the best way.
Router is very important, it will assign ip addresses for cameras and PTZ controller automaticly,
then, don't need do any settings on computer.
Save 20+ steps to setup the system.
Can I use it with OBS?
Yes, You can use IP stream or USB stream to OBS
Great, thank you! @@fomako9778
Thanks for this. Please does the router need to be connected to the internet.?
no, router doesn't need to be connected to internet.
Router just assign IP address for cameras, Controller and computer,
then, you don't need set ip addresses for them one by one, much more eaiser to setup the PTZ camera system
@fomako9778 so only computer can be connected to the Internet?
@@kaczuchasly5174 yes, if you want to use camea's IP stream function to stream to RUclips, facebook... directly,
you'd better let router assign ip address for the camera.
Is it possible to use a pair of these cameras just to record a conference? I do not need any streaming, I would like to use them as videocameras.
your can use the cameras as conference camera,
it has USB 3.0 video out, computer and conference software can recognize it automatic,
but the camera doesn't have recording function, you can use other streaming software (such as OBS) to record and save to computer directly.
Hi
how much it cost the complete setup you are using?
it depends on which cameras do you want to use, 1080P or 4K, 20x or 30x optical zoom,
if you know how to choose, please contact FoMaKo,
We can help you make the decision .
Can i get a link to the switcher
i think youtube don't allowed to post link directly,
please go to Amazon and search "FoMaKo PTZ Controller" ,
by the way, it is a PTZ camera controller, not a video switcher
Does it need internet connect with router? Please
Dear Friend, router doesn't need to connect to internet. Just use Ethernet is ok.
my fomako login menu looks much different why so ?
Did you purchase the camera two years ago?
If so, please contact us through our official website,
We will help you check if there are any new update for your camera.
@@fomako9778 can I call customer support for live help or is it only back and forth through emails ?
How can I purchase?
Dear Friend, please Go to Amazon, search "FoMaKo", you can find FoMaKo Amazon store. Thanks for your interesting.
Does the Fomako work at 1080p50
yes, FoMaKo camera works at 1080P50, 1080P60 , 1080i50, 1080i60, 1080P59.94 , 1080i59.94 and other resolution
Cam needs have NDI??
NDI is one of the streaming method, it has eaiser settings and lower latency.
if you get the no-NDI version camera, you can also setup great live streaming system.
How do I update these cameras?
please write to us, we will check your cameras' firmware, and give you suggestions to upgrade the cameras.
How to connect to a computer?
several ways to connect to computer:
1)visit camera's IP address in web browser
2) USB
3) stream to software such as OBS, Vmix
4) use Video mixer switcher
5) If you use HDMI or SDI, you can also use HDMI to USB , SDI to USB video capture card
J'ai besoin d'un devis pour un kit compet
Dear Friend, please visit our official support site and write to us,
we will quote you details price , thank you !
Masih ada jual kah barangnya
How can i purchase in india
please write to us directly, thanks!
Where can I buy this please?
Dear Friend, please Go to Amazon, search "FoMaKo", you can find FoMaKo Amazon store. Thanks for your interesting.
KC608 Pro v KC608N Pro?
KC608N is the NDI version of KC608 Pro
KC608N has NDI control protocol , it can control NDI PTZ cameras by NDI control protocol;
KC608 Pro will use Visca over IP(Sony Visca), Onvif protocol to control PTZ cameras.
@@fomako9778 So with this KC608 Pro I can still use NDI for video. Just not to control, correct?
@@bahamasc The main function of the controller is to control.
So, it does not affect the video functionality of the camera
Background "music" is annoying. Otherwise good job.
thank you ;)
Well it looks to me as nothing much has changed controller wise
Pra mim mudou, veio faltando uma opção
Como
Ima Drive
Mantap berapa harganya ?
Please visit our official support site and email us which models do you need, we will quote you the exactly price, thanks!
Daugherty Lake
😮wow
Mantap
Harganya berapa?
please go to our official website and contact us, thanks!
Stephany Ridges
Linda Views
Florine Locks
Fiyat nedir
please go to Amazon and search "FoMaKo", thanks
Convida a todos para participar conosco TV repórter da boca do povo no RUclips
Salvador Place
Bins Glen
Payton Fields
Emmet Road
Garcia Matthew Lewis Betty Moore Eric
Williams Deborah Williams Jennifer Lee Betty
86120 Lily Pass