And just assume 1st throttle air screw rotate 5 time and 2nd throttle screw rotate 3 time but liquid are similar it's means dual throttle rpm are similar?? Plz reply
Uncle Robb I’m a Road King’r myself these days. Was a great looking vaquero you had. Almost had me convinced to go that route but a road king basically fell in my lap. Glad to hear you are still puttin’ miles down on 2 wheels! Safe travels
@@JustinHicks82 I loved the vaquero. But if I rode it for another couple of years It just would have had no resale value. Plus I get bored lol. I'm on my 39th bike.
Engine oil. Use 12mm hose for oil reservoir and 6mm for carb connection (6-12mm reducer). Fill under 1/4 of the 12mm hose length, so in case of one carb sucking too much, air will "bubble" within 12mm hose keeping all oil out of the engine ;) Thinner oil = easier to bubble. 0w30 will do well ;) Or just use your old engine oil. You can also make suction-proof bottle combo, but hose is easier. If you really worry about sucking oil into engine, use longer hose (+1m of 12mm) and add check valves ;)
Good one. Thanks Robb
This looks so simple... I'm not understanding why everyone else use 4 glass bottles where they have to drill holes and seal them...
Попробуй сам использовать подобные трубки , при синхронизации своего мотоцикла и узнаешь зачем люди используют бутылки для этого 👌😉
@@ЕлизаветаМеньшова-л2н I will, seeing as how I already made a tubed one. If it works it works. If not, I'll take the tubs apart and use bottles.
GOOD
Bro how to guess rpm single throttle?
mechanical linkage between carbs
@@unclerobb9941 other wise liquid are similar so rpm similar?
And just assume 1st throttle air screw rotate 5 time and 2nd throttle screw rotate 3 time but liquid are similar it's means dual throttle rpm are similar?? Plz reply
@@Maruti_motoshop do you have Instagram?
👌🥂❤
Where is the vaquero?
Long gone man. Sold it last year. I have a nice road king at the moment that I ride. And 2 sportster projects.
Uncle Robb I’m a Road King’r myself these days. Was a great looking vaquero you had. Almost had me convinced to go that route but a road king basically fell in my lap. Glad to hear you are still puttin’ miles down on 2 wheels! Safe travels
@@JustinHicks82 I loved the vaquero. But if I rode it for another couple of years It just would have had no resale value. Plus I get bored lol. I'm on my 39th bike.
Liquid name?
Engine oil. Use 12mm hose for oil reservoir and 6mm for carb connection (6-12mm reducer). Fill under 1/4 of the 12mm hose length, so in case of one carb sucking too much, air will "bubble" within 12mm hose keeping all oil out of the engine ;) Thinner oil = easier to bubble. 0w30 will do well ;) Or just use your old engine oil. You can also make suction-proof bottle combo, but hose is easier. If you really worry about sucking oil into engine, use longer hose (+1m of 12mm) and add check valves ;)
@@ryteulopki8069 what if you use water :)
Damn hose alone cost me 40 bux. To set it up and reach the bike.
I have the fittings.
Should have just bought some damn gauges for 60
Where the hell did you over pay for that? It's like 40 cents a foot at any hardware store.
Wow. What the hell kind of hose are you buying? Stuff is super cheap, everywhere. Gotta be smarter than that, kid.
@@unclerobb9941 Gold flecked tube. :D 😜