We Are Coming To WIN IT ALL!!! Both Burnout Trucks Get Some Major Upgrades!!!
HTML-код
- Опубликовано: 4 апр 2024
- Both Of our burnout trucks go under the knife to get some more horsepower and some awesome upgrades!!!
***DONT FORGET**
Enter To Win A GMC Sierra Fully Built by Cleetus McFarland!!!
***Grab all your JH Merch from www.cleetusmcfarland.com/coll....
Cleeter working on diesels and jh working on gas engines talk about twilight zone
😂ikr... 2024 is weird
Don't forget jackstand jimmy saying no nitrous on the ute
Jh giving them some tips on the 7.3 and the vibe they had during just shows how good of friends all these guys are. Best friend group on the internet
🤯
He needs to get that 6.0 burnout back out and redeem himself because right now it looks like there's a new big bad diesel shop in town and they go by DNR and it looks like they know a few things ol jh who doesn't know.
Guys the RPM limiter on a small block Chevrolet is the valve train floating.
You know you're not wrong...
I know he has an hei distributor on this one but you can run an ignition box with a limiter on the old school small block
Very true I just left them a comment saying the valve springs are key to getting the high RPM the cam may go but the valve springs will limit you
Not just that but also the rotating assembly of the rods, pistons, and crankshaft. The heavier those are the less rpm you're able to turn. And also whether the block is a 4 bolt main or 2 bolt main.
@@billykennedy2265 exactly only run two-bolt mains because they're a lot lighter than a four bolt main same strength. And the crank rods and Pistons have nothing to do with how many RPM a motor can turn it's the heads that limit you. You can put rotary heads on a V8 and turn it in 19000 RPMs as long as it's balanced.
I would not worrie about burnout truck 😂😂 I'd be hiding all your rigs, cause old cleet and squirrel and coming for everything 🇨🇦🤘
Nah the Aussies are coming to show you guys just how it’s done. 8 cars are on the water to the USA
Congratulations on the freeedom 500 win!
Brother!
Brother you said that so casual... he didn't just win the FF500... he friggin dominated! 19.3 lap times at the end of the race! Faster than any qualifying even his own ... how did he get that thing faster the hotter it got!
Congrats on the new repo rig JH !!! Pick ‘em up from the air, drop them off at the yard in no time 😅
Sounds way better. “ Lil Chop “ should be its name 👌😝
CONGRATS ON WINNING THE FREEDOM 500!!!!!!!!!!!!! Tomorrow you shall conquer the burnout comp my boy!
If they both win their classes I'll be over the moon. Total JH crew domination.
Not with that lackluster v8 in that white reg cab. Crowd doesn't even react. No power. Nothing cool about it compared to the 6.0 reg cab. Say what you want but the 6.0 sounds great and is always a crowd favorite.
Cant keep a 6.0 running in a burnout truck but can damn sure lead the whole freedom 500. Unreal!!😂
Congratulations brother!!!!!!!!🎉🎉🎉
You better change that oil breather on the valve cover. Can you saw 🔥 FIRE !!! Boys and Girls... catch can needed asap
should add a shroud to that trans cooler fan, a baking sheet works great for cheap n easy shroud... other wise that fan is useless, doesn't cover enough surface area to even cause enough of a temp drop since the cooler will heat sync really quick when you got your foot through the floor pan.
Hell yeah man congrats on the freedom 500 win!!! A freaking helicopter! What 😮🎉
Edit: it’s so funny that Cleetus picked you to finish last and you dominated and won 😂
It’s extra entertaining watch diesel guys work on gas stuff and gas guys work on diesel stuff 😅
Throw a rag over top of the card when it does that hahah just hold it on there don't flop the fucking thing
Couple more pumps and he’d have hydro locked that poor thing trying to start it 🤣
"Quick cam change" I think that's called the snowball effect. She sounds rowdy!
Congratulations you definitely got the win jh coming in for landing.
proud of you jh for winning the freedom 500, have fun in the plane!!!
Strobe capable wheel lights while doing a burnout would be bad ass
It took me a long time to like Justin. I’m glad I stuck around. I’ve been clicking on JH videos before Cletus videos lately.
Where's the Nitrous at?! You should be spraying the house down in that thing!! 😂
Nothing like JH making sure he gets his truck super hot right before y'all have to work on it I mean you have to work on it Justin
The best thing about soup cans on stacks is watching them fly off when it fires up.
Congratz on the big win tonight.
That Justin is a bad dude. Very valuable to this channel.
My favorite part of the video was when the distributor cap was coming out and the Cresent wrench fell to the floor. I had a dejavou moment of my dad and me. It was a 71 chevy love pup with an lt 1 and a five speed
Did the damn thang congratulations Justin. Well deserved
You better Park all your vehicles inside the shop cleeter got the tow truck going lmao
Love the carb!!! In New Zealand we call that intake a bird catcher. 😁😁😁😎😎
Chur bro 😂
@@PaulyDDownunder My Ninja! 🥷
Dual burnout was awesome!!!!!
Grats Flyboy! Now you can use the Prius' pontoons to use the chopper in the wetlands! xD
Danger to manifold, danger to manifold, danger, to manifold, freaking hell yeah, brother
Absolutely so happy for you bro can’t believe you won. Hell yea!
Congrats on the Helo JH!!! Cleet is going to REPO it, LOL!!! seriously, congrats on the win!!!
Huge win!!! Congratulations!!
Congrats on a epic win tonight!!!!
So happy for you way to go I can't wait to see you fly that thing
That’s the carburetor off my air boat😂😂😂😂 Florida Man 1&2 at it again
Then the trans falls out…. Dang it lol! Full send for sure it was awesome to see it!! Keep up the good work boys!
congats on the winnnnnnnn
JH FLYING HIGH RIGHT NOW!!!!
Bro! I was so glad you won! Put on a straight clinic! The only other person I wanted to win it was Squirrel, just because I get the feeling he's learning to fly helicopters and would use that thing as a commuter.
Congrats to the F500 win
You kicked ass! Congratulations! Been watching all the races and knew it was going to happen this time! You are the record holder for most laps in front and then the win! Freakin awesome!
As a JH fan/supporter, please don’t let us down, and let Cleetus get ya with the tow truck.
Hell Yeah Brother on the Freedom 500, wire to wire win!!!
Congratulations on the win!! One hell of a driver.
Man. I gotta gen1 small block in my 83 gmc s15 that would benefit from the “wrong parts.” Love y’all’s content.
Congratulations helicopter boy! Can you be the next Smokey Yunick? He flew a helicopter too.
Congrats on the win ! heck yes was an amazing race, well done.
Congrats on the win and the new chopper
Congrats on the win it was amazing to see in person I was cheering for you the whole time… my husband was cheering Derick and you both literally kicked butt… that was a heck of a race. You killed it!
That bumper to bumper burnout was freakin cool, all the freedoms and bald eagles screamin. Let's go boys, get those trophies
HELL YEAHH JH!!!! WINNER OF THE FREEDOM 500!!!!!!!!!
Man I can’t wait to see what you do with that helicopter 🇦🇺 good luck with the burnouts fellas 🤘
Congratulations on new helicopter 🎉🫡🤙🏻
Cummins swap incoming lmao
He could sell it over 100k
Justin, you boys should have pinned your balancer, especially runnin sustained high RPMs. GM engines are known for spinnin on the crank, even though they either press on, or have a keyway.
''why do you have so many switches?'' ''for extra'' hahaha
That skid ute would go good with the blower on it. Theres a reason most us Aussies are throwing them on LS skid cars
Steel shim head gaskets used to be all you ran on older small block chevys. It was standard in all the kits you bought .
180° out. Btw. To put out a “bowl” type fire simply put a towel over it and it Will immediately run out of oxygen and go out. Waving at it like a pansy of blowing more air into it will not put it out
Hell yeah, brother!!! Congratulations on winning the Freedom 500
Congrats on the win last night! Channel has been killing it lately. Ya’ll have taken the #2 spot behind cleetus in my watch list. Keep er up fellas, we appreciate ya!
The S10 needs a big ole tunnel ram!
I already see where this is going. But motor blows then swapping in the built motor from your mud truck. The. Super charged big block.
You absolutely can run a flat tappet cam in a vortec at least I sure did . When that single piece rear seal and center valley roller retainer bosses are basically the only difference. You just need different push rods
If you guys needs some help on that truck you could always call cleet and squirrel 😂😂😂🤦♀️🤘
Congratulations on the Freedom 500 win JH💪🏼
Congratulations on the big win
Should have left the carb alone at initial fire up, once started, make adjustments after motor is warmed up. 💪🏽 Nice work fellas, she chopp’n now 🇺🇸
Congratulations, you deserve it
Shread all those tires and use them for that entrance next to the shipping container or anywhere else. Makes good driveway instead of dirt.
Funny now hearing y’all talk about the transmission not overheating knowing it fell out of the truck 😳😜😝 let’s go awesome burn out
CONGRATS ON THE VICRORY!! You Killed it today! I was thinking you would take the 100K + 8K owed lol but the heli is awesome
You coulda put that whole setup you bought in there, it would just make it flat tappet by taking the stock roller setup out of it. All those parts woulda went right in. Ill also add, i read lingenfelters book, and he would run two of those steel shim stock headgaskets stacked, with just spray paint between them to seal them against each other to get .030 thickness to clear a .642 lift cam. Obviously each combination should still check valve to piston clearance. Ive got a set of those gaskets new in the box i never used. But great way to pick up compression. The only thing different on roller cams and their timing sets, is that ledge around the front of the roller cam. Good luck at the freedom factory.
Exactly.. same comment I made
@@jasonsparshott7208 right on.
I read lingenfelters book too and he said that he would have pulled that gasser out of there and put in a dirty max. That's how you win next burnout comp🤷🏻♂️ just saying
Congrats brother
JH when doing a startup you should have your hand on the distributor and giving the engine the timing it needs to fire up. quit touching the throttle
Congrats on the big win!
Congrats was definitely rooting for ya last night!!
And you done it, congratulations on the helicopter 😂
Congrats on the win
Hope you park the helicopter ontop of clets shops
40:25 "if you're gonna dance with the devil, you might as well lead"
Leos coming witha 6 liter ford hes gonna show yall 😂
Hey man congrats on winning the freedom 500 in the Vic's great race💯💯💯👏
Well those intake bolts arent vertical, so they arent vortec heads, and the roller cam, you just ditch the retainers and you can use a flat tappet. I have worked on those blocks with non roller cams from the factory. All the bosses are there just not used. But those arent vortec heads.intake bolts are streight upnand down and only 2 on all for corners of the intake, not center intake bolts. But roller cam blocks can accept a flat tappet. Either use an older timing set without the retainer plate on the front of the cam or a later style cam that will accept the retainer.
Yep …
They are after market heads that’s why they aren’t straight
You dominated the freedom 500….. proud of you brother
You guys want 7000 RPM your going to need valve springs, the cam may go to 7000 but factory valve springs will only let you get to 6000 depending on how old and wore out the springs are.
They have them watch from beginning to end
Congratulations JH Diesel and 4x4 and gasser and Aviation 😂
Congratulations on freedom 500 win
Love that S-10!
Yall didn’t say “How bout Now”. No wonder it wouldn’t start. Need Squirrel & Cleet to help y’all out lol
I like to content Justin! Keep the hard work up. It’s paying off.
Should have went though jimmy dale for the nitrous he would have took good care of you with a N/X kit but great job the both of you in the contest you both were awesome even though the s10 had parts falling off it lol
I’ve been thinking this forever go big on the trans cooler and the coolant system on the burnout rigs it’ll save a lot of headache
Freakin break it in how you plan to run it! Lol. #JUSTGONNASENDIT!
Gonna need to convert it to a single seat too haul your ass around. Lol. Good job
Congrats on Winning the Freedom 500 JH. You need to get your helicopter pilots license.
Great job winning last night you proved cleeter who's the BADAZz
Its funny seeing justin shut down ole boy on the revs.. ole jh is the king of cold revs !!
the roller setup gonna be better for that 7k range i got the same basically in my camaro but i just gotr the centerbolt valvecovers
Big 1203 guys now
I knew you would win man wore the merch the entire time all 100 laps brother