The truck sounds great with the boom tubes but give it a H pipe (or an X Pipe if your feeling fancy) to connect both banks and it'll sound even better!
Gotta have a x-pipe and create a point of where it bulges out and tapers back in no smaller than main pipe and then flows smoothly out through the end of the boom tube. It’ll sound insane if you do it this way and you can gain some horsepower doing it.
You should totally do something super unique and run a pipe from each heade pipe out of a different location on the bed so it would have 8 individual exhaust pipes sticking out of the bed I know it sounds crazy and probably wouldn’t work but what if it did it would sound crazy noise coming from all directions
Justin, I know you probably have been doing it for years but I recommend you and everyone that uses grinders often to pull the strings out of your hoodies, shit can get interesting real quick if that string gets in the grinder or anything that spins at high speed that ur face is kinda near
I think it should get what garret has in the drift Donny. Just a high revving naturally aspirated set up. Or the small block chevy, high revving on NITRO METHANE
With the bed rattling that bad y’all should consider sliding an old rubber floor mat or mud flap under the battery to avoid knocking the cells out of place.
A trick I learned from the Aussies, and you may end up doing it with this exhaust, im not at the end of the video, but USE the exhaust to help direct, and spread the tire smoke. Some of those guys do two straight out the back, like Killa Bee and War Bird, im sure you got to get a good look at both of them. But, some of the tubes exit at a place under the truck but directed towards the tire, to push the smoke up and back. Just not too close cause it sets the tires on fire real quick. I dont even know why im telling you this, when you guys have access to actual Professional burnout guys, OH Burning Green, look at how his exhaust is setup like Warbirds. Its about being LOUD AND making a good smoke show. Good luck man! Oh, and a BIG F'N blown Big Block would do wonders for this little truck.😉 Dont fuck around with a N/A setup, go straight for a screw blown setup if you really wanna party.
I don’t think the cause of the big blocks demise was bc of the blower. I’m positive the cause was your right foot and the environment the engine was being operated in. Mildly built engines with a roots blower do not like excessive throttle whacks. Aluminum rods, a strong blower crank, heavy wall wrist pins and good pistons, along with a strong top end, is a must for what you want to do with the blower.
One of the auto Parts Warehouses I worked for had a fleet of old Mazda mini trucks. They ran forever, but forever was a ways back. The original owner sold the company and the new owner invested in a fleet of Chevy S10’s. Decent trucks I guess, but they all had one glaring problem. In a bout 80 to 100 thousand miles the Doors started falling off. When these trucks are making deliveries and time costs you money you drive these trucks hard. So, depending on how many miles or how many times the doors had been opened, the drivers side door on this truck might have had a door hinge pin issue, and that might have cause it to fall off, breaking the window in the process.
When it comes time to doing a wrap on the mud truck let me know! We’ve been in the printing business for 30 plus years and are in Florida. Family owned business. Would love to work something out if you’re interested
![Cordae - Saturday Mornings (feat. Lil Wayne) [Official Music Video]](http://i.ytimg.com/vi/z2GYJua09F0/mqdefault.jpg)
The truck sounds great with the boom tubes but give it a H pipe (or an X Pipe if your feeling fancy) to connect both banks and it'll sound even better!
Def x pipe
Should be a pipe between both boom tubes so its balanced, might get a few more ponies too. Might sound like an eight from both sides too.
Agreed on the "H" pipe.
@noCo970 X pipe has a better high rpm sound vs Hpipe low rpm/idle imo
Good call, an x pipe would make a huge difference
Not an H pipe X pipe sounds better and creates better flow.
its about exhaust scavenging, not flow@@thegrimstreaker4669
Good spot on the back of the cones for a fuel injector, heh heh!
Love the placement of the boomtubes exits. Need an X pipe. And maybe a flame thrower system for show.
Another good show guys, Justin's one hell of a fabricator I can't wait to see that Square body crew cab long bed back on a channel
Builds are coming together.
The "Boom Tubes" sound awesome!
🇺🇸💪😎
Justin... Not Justin Justin but the other Justin puts in so much work to get you guys stuff dialed!! 💪💪💪
All those new HOA neighborhoods are going to love you
He should put a balance pipe between the pipe
Exhaust exit right in front of rear tyre on burnout cars are prone to tyre fires 🔥 🔥🔥can’t wait light her up
Very impressed! Very good high-quality work right there buddy.
Imagine if Justin and Tye got on a project together, thing would be a work of art!
Lmao😂😂 “I see he found the Ratchet” had me dying!
JH and Justin, y'all rock! Love the boom tubes. Peace
What a sweet product Yas done built there 👌 mint to see them in action
thats got some hell yeah brother in it, love it.
Just toss a lower gear in the drop transfer case and you'll be fine sometimes less power is more fun cuz you don't break stuff
Man this is fucking awesome guys. Homemade boom tubes HELL YEAH!
This is gonna be cool as hell.
Great content thanks for sharing
Bro, I was laughing with you while he was backing out. I love it.😂
I love it ! Think it's pretty damn good looking actually
I love the s10! Great video guys.
Need to put a x pipe in it make them higher rpms sound better
ya should paint that Hood scoop Shop Green brighten that S10 up,
At least they got thier "STEEL TOE CROCKS" on......
Bold move doing all that in crocs
Sounds awesome
Those square body s10s always was a great platform for speed and look great burning out. Sounds mean and makes me love chevy even more
Can you install a Holley sniper and wire in a nos kit that is controlled by the sniper? That would be cool on the s10
Love the content!!
Sounded better with the straight piped.
Love the content man keep the videos comin
Boom tubes are perfect.
That looks toooo clean, bet the boys are gunna get a kick out of it too lol
Loving the channel Mr. JH
Please build the 6.0 for the og mud truck! It’s was it deserves!!
He's going to be able to see a lot better now too, sounds great yeeyee
Thats a great idea. Never thought of that
As always man
Love It
Damn that’s a gorgeous obs
You need a H pipe or X pipe for that to actually sound good.
Gotta have a x-pipe and create a point of where it bulges out and tapers back in no smaller than main pipe and then flows smoothly out through the end of the boom tube. It’ll sound insane if you do it this way and you can gain some horsepower doing it.
When you were filming the floor there I thought we were laughing at Justin's Crocs
JH has the "content" I love ;)
Brother!!! 454 like a rock 💪🏻 Don’t kill it because it can go in the S-10 next 😂
Looks cool
GETCHA SOME YEE YEE!!
👍🤘👏
Love your guys’ humor. Same kinda funny comments I make…
1,000 hp, more like $1,000… lol love it
180 degree headers will make it sound insane!
The ole composite toe crock is one of my all time favorite shop shoe😂
Put the blower on that motor. Just adjust the pulley size so she don't make too much boost.
Dangit man the blower was bad ass I hope you find a 454 that will handle the blower because you are gonna need it
Now you just need a fireball tune to go with the boom tubes so its spitting fire like a dragon lol
Check the pinion bearing or the carrier bearing in the rear… one of them has moved. The tire to dead stop like that is a sign . Bad ass truck though.
When ya boss says pop the tyres, u pop them dam tyres😂
You should put flamethrowers in your exhaust I guess that's like a mix of diesel and gas that shoots flames really far while you're doing your burnout
I dig that truck alot
Need a “H” or X pipe put in so it doesn’t sound like 2 4 cylinders
Nice tubes. Could I suggest a balance pipe between the two 2 1/2" pipes?
X pipe and make them shoot flames! Sounds great!
Sounds much better now, but it needs a x pipe badly. It'll make it sound even better with it.
second the x-pipe, or even a double x pipe lol
Sweet s10
You should totally do something super unique and run a pipe from each heade pipe out of a different location on the bed so it would have 8 individual exhaust pipes sticking out of the bed I know it sounds crazy and probably wouldn’t work but what if it did it would sound crazy noise coming from all directions
Justin, I know you probably have been doing it for years but I recommend you and everyone that uses grinders often to pull the strings out of your hoodies, shit can get interesting real quick if that string gets in the grinder or anything that spins at high speed that ur face is kinda near
Good thing Justin had is safety crocs on
Even pipes and there suppose to have baffles or something inside the boom tubes thats just metal funnels
I think it should get what garret has in the drift Donny. Just a high revving naturally aspirated set up.
Or the small block chevy, high revving on NITRO METHANE
With the bed rattling that bad y’all should consider sliding an old rubber floor mat or mud flap under the battery to avoid knocking the cells out of place.
Reinforce the wheel wells so the bed don't get tore up when the tires explode
Burnout kings will ride again
Loud pipe saves life
That is Freaking Wicked
I like this🤜🏾🤜🏾🤜🏾💪🏾
Run a bass piano string back and forth through it and then it will scream.
He did all that in Cros 😂
So fast it blew the windows out 😂
A trick I learned from the Aussies, and you may end up doing it with this exhaust, im not at the end of the video, but USE the exhaust to help direct, and spread the tire smoke. Some of those guys do two straight out the back, like Killa Bee and War Bird, im sure you got to get a good look at both of them. But, some of the tubes exit at a place under the truck but directed towards the tire, to push the smoke up and back. Just not too close cause it sets the tires on fire real quick. I dont even know why im telling you this, when you guys have access to actual Professional burnout guys, OH Burning Green, look at how his exhaust is setup like Warbirds. Its about being LOUD AND making a good smoke show. Good luck man! Oh, and a BIG F'N blown Big Block would do wonders for this little truck.😉 Dont fuck around with a N/A setup, go straight for a screw blown setup if you really wanna party.
The first time you turned on the engine, it started playing bleed by messugah 😂😂😂
If that ain't a friend thing to say, "he don't like burning out on those tires so I keep making him do em" I don't know what is. LOL🤣
My god Justin clean that floor dude WOW !! Sorry i meant Jason !
I don’t think the cause of the big blocks demise was bc of the blower. I’m positive the cause was your right foot and the environment the engine was being operated in. Mildly built engines with a roots blower do not like excessive throttle whacks. Aluminum rods, a strong blower crank, heavy wall wrist pins and good pistons, along with a strong top end, is a must for what you want to do with the blower.
You should put a x pipe on it
Ya'll should put weight plates in the bed. Pip them tires
bruh that looks like it should go down a drag strip and do burnouts. just get some turbo chargers that cleetus has leftover and make that a monster
One rowdy lil S-10....
Makes me wonder what zoomy style boom tubes would sound like
One of the auto Parts Warehouses I worked for had a fleet of old Mazda mini trucks. They ran forever, but forever was a ways back. The original owner sold the company and the new owner invested in a fleet of Chevy S10’s. Decent trucks I guess, but they all had one glaring problem. In a bout 80 to 100 thousand miles the Doors started falling off. When these trucks are making deliveries and time costs you money you drive these trucks hard. So, depending on how many miles or how many times the doors had been opened, the drivers side door on this truck might have had a door hinge pin issue, and that might have cause it to fall off, breaking the window in the process.
Back the timing down a little bit and spray the house down on that big block. Stock will take 200-250 all day
How much for a set of those jh diesel brand boom tubes those actually sound really cool id rock a set
Justin truck is going to be ripping. Everyone else has their hands full.
When it comes time to doing a wrap on the mud truck let me know! We’ve been in the printing business for 30 plus years and are in Florida. Family owned business. Would love to work something out if you’re interested
Needs an X pipe to equalize the cylinders and it’ll help scavenge exhaust as well.
Haha looks sick
Used to have the same thrush mufflers on the same s10 but a 2.6 v6 lmaooo
Justin's face while doing the burnout lol. Almost looks disappointed
Put the X or H pipe in Justin’s S-10 to make it sound better.
Definitely interesting lol
Needs an X pipe to sound right
Justin needs to drop the front end a couple inches