HIDDEN MENU OBD ONBOARD COMPUTER CLUSTER 97-03 BMW 5 SERIES E39 528I E34 E32 M5
HTML-код
- Опубликовано: 28 авг 2024
- I Will Greatly Appreciate If You Can Give My Video Thumbs Up And Subscribe To See Future Videos Thank You Very Much
www.unofficialb...
www.bmwtips.com...
1 Car Engine and cluster data
1.0 46nnn Chassis nr/VIN serial number (last 5 digits)
1.1 4nnn K-number
1.2 690236 Cluster Part #
1.3 045210 Coding (04)/diagnosis (52)/bus index (10)
1.4 1200 Week (12)/year of manufacture (2000)
1.5 09_160 Hardware (09) and software # (16.0) of cluster
1.6 Not used
1.7 04__44 CAN-version (04) KI-revision index (44)
2 (test) Cluster System Test - Activates the gauge drivers,
indicators and LEDs to confirm function
3 SI Data
3.0 1098 Used fuel in liters since last SI (Service Inspection)
3.1 0231 Periodic inspection days; elapsed days (since last SI)
4 Momentary Consumption
4.0 0145+ Instant fuel consumption - 0145=14.5 liters/100km
4.1 0018 Instant fuel consumption - 0018=1.8 l/Hour
5 Distance Gone Consumption
5.0 082 Average mileage; 082=8.2 liters/100km
5.1 0536 Calc. km to refuel (momentary distance to go)
6 Fuel Level sensor inputs in liters
6.0 109330+ Fuel level averaged; Left half sensor input=10.9 liters; Right sensor input=33.0 liters
6.1 0439+ Total tank level averaged; vlgs 6.0: 10.9+33.0=43.9 liters
6.2 0442+ Indicated value (44.2) and tank phase
7 Temperature and Speed
7.0 021+ Coolant/Engine temperature (2.1C)
7.1 130 Ambient/Outside temperature - chg met 5 pts. 125/130/135
7.2 + Engine speed / Current RPMs 1/min
7.3 + Vehicle speed / Current Speed in km/hour
8 Input value in HEX form
8.0 1d0+ System voltage ADC-Value Hex code
8.1 26C33C+ ADC Values HG left/HG right
8.2 0000 ADC Value brake degradation sensor (000=o.k.)
8.3 18C ADC Value outside temperature
9 Battery
9.0 140 Battery Voltage - 140 = UB 14.0v
9.1 242013+?
9.2 074_78+?
9.3 0011+?
10 Not used
11 Not used
12 Not used
13 GonG Gong Test
14 Not used
15 Status cluster I/O-ports (bit codes) 0=low; 1=high
1st-belt contact, seat belt fastened=0; 2) ignition lock contact, key inserted=0; 3) door contact, door open=0; 4) clock button pressed=0; 5) SI reset=0, for reset=0; 6) EGS transmission failure=0
Status Digital Outputs (bits) 0=inactive, 1=active
1) Gong output; 2) Brake warning lamp; 3) Low fuel warning lamp; 4) EGA lamp; 5) seat belt lamp; 6) manipulation dot
16 Not used
17 Not used
18 Not used
19 Lock Status; unlocks functions in range 3-18
19.0 L-On/L-Off Unlock: press button when "L-Off"
20 Not used
21 Software Reset; reset OBC settings
Have your key in the 2nd position and under your hood there is a tester plug; put one end of a little wire in hole number 7 and the other end on a strong ground. Keep it there for 16 seconds and it will reset your oil inspection lights all the way to the green.
Good stuff, like that you aren't scripted and work through stuff often encountering the same issues I am wondering about. As to the critics, what is beautiful is creating something. Especially something that helps others. Criticizing the creation of someone else while you offer no creative work of your own is lower than being a Grammar Nazi. And let's face it, Grammar Nazis are below even lawyers and politicians.
dude at first i was inpaitiant. and as i watched the info was great. on the battery voltage test you got 125 just as i did. which i know is normal bat volts. 14,5 is running. so i went back into that test and got 125. i thought why not try and start the car in that mode? so i did and it went up to 145. great info man thanks. that test alone is a great tool to have. the rest i will figure out as i go.
@ADarrkLiight There to break sensors The two sensors are only on the left side tires. There are four ABS sensors on each tire. You will have to remove each tired and check the wires for any where or tear that could cause it to go off. For the engine light you would need a OBS2/0Bd2 to scan the car to see the colds.
@Lenkabound sorry about that i thoughts you're talking about the RPM gauge but the lower gauge with 40/20/15/10/8 it's normal when its on the left side when you are idling it should only move when you're driving
Wow, you are really smart, ese. I came from southern Cal and feel like I recognize your accent. but you know so much! Where did you learn all this? I am tryhing to get my air suspension to work without going to dealer. I don't even know if you are still up, so if you are, I'd appreciate any hints. and because of all your start/stops, Ima have to go back and look at it...slowly! thank you.
@Marvin Benson It's a common Problem. It's just like the car radios. That you can't see the numbers Because they faded away. replaced the inside
Thanks for the tip. My speedometer isn't working and I need to test if it is the motor or the speed sensor.
Hey thanks man i have an 07 BMW X3 and the menu works the same thank god i had to reset my instrument cluster thanks bro✌which year bmw is that by the way?
@shmuntik Not that many people understand when you're workingman. Thank you
Fantastic video bra, it really helped me for eg that huge nr 690k at menu 1.2 I thought that is the real kilometers....hahaha what is that actually mine is also 690 but different ending
Hi , thank you for this information but pls just one question , the number you change it above there's two signals the car one and the middle one , so my question is what does mean the middle signal and what to do to turn it off because in my car I can't go above 80 and I don't know what's the problem , so pls if you can help me , tell me what to do and what is it mean , appreciated and thanks a lot
Thank you ,
this video is very helpful but it seem to stuck after 3;20 min. i have a bmw e39 and i would love to the DIY aspect like what you are show would be good to get a better link please.
@Lenkabound you have a vacuum air leak somewhere do your engine shake a lot
Thanks for all your videos! I have a 2000 Bmw 528i, and the adometer and speedometer are not working.When I tested the cluster everything worked fine,when i drive the speedometer nad adometer doesn't work. I changed the whole cluster and still have the same problem what do you think I should do? Thanks in advance
When doing this testing in my BMW 523i e39 one indicator is switched on and I can't switch him off. This is this 1 st indicator (2 yellow little cars one behind the other) on the left ( on your dashboard switched off) between MPH and MPG clocks. On your dashboard second yellow is ASC and third is a car with up and down arrows. What is this first one which you don't see yellow with 2 small cars one behind other. What is this and how to switch this off?
BMW locking. Promgramme
Nice vid, very interesting and helpful. Thank you.
i guess it's kinda off topic but does anyone know a good place to watch newly released tv shows online?
@Grayson Stetson I would suggest flixzone. Just google for it :)
@Grayson Stetson i would suggest Flixzone. You can find it by googling =)
What number is to turn off the "service engine soon??" I can't turn off the service engine soon light. I have a 2001 BMW 325xi.
@ADarrkLiight Do you have any engine light on.?? I would check the Speed Sensor In Differential. How long has it stopped working for??
How do you change the cluster? I have a 97 BMW 540i the cluster show up half way like I can nont see the miles on there it lights up in spots. Any ideas of how to take of this problem?
@joynt2002 I'll keep that in mind for next Video
Can some one help me - I drive a 1996 - 520..right hand drive .... and when I drive at high speeds and tap the brake I get a quick vibration on the handle - feels like when u tap the brake and the pads hold u get a rough jerkish vibration.. I’m not sure if busted shock runners may be the reason .. Any one has and taughts ??
Ay bro wat does it mean wen the car is lit up on the dashoboard with just the top right red light on?
How can i change my Miles to KM? Please let me know.
@Lilbabbiejo3 We bought the car and the speedometer didn't work. The brake abs and engine light is on. Which speed sensor do you think it is ? This is are first BMW and we don't know much about, how many speed sensor's in the car. If you need any more information just tell me.Thanks for your response and sorry for the late reply
@renshaw1958 No problem you're welcome
What about the 3 headhight indications that remain on. Is it thhat the lights are blown or is there something else. If so please explain how this can be resolved .
Tamir K Check your parking lights and check your brake lights. That could be the reason why the third brake light remains on
Witch is the menu for kilometers to miles....??????
@jmchavez001 What year and model is your car ? All cars are different
How can I change the kilometers to miles...
@Jason Smith All the colds are in my description
come on bro your spinning head man lol
can you tell me the whole list for this video i mean the list from the on board computer #1 to 21 because i need to change my temperature °c to °f
Hi, my guages are in miles for example it says 137 miles to empty tank .. is the any way I can put this into kilometres ..??
how to made check engine light close please help me
Do you have the list of codes and what they check?
My MPG gauge goes all the way to the left when I'm idle. This isn't a big deal, is it?
Lol no.
@javade11 A better link to what???
Hey i don't have that cool car graphic on my e39. I got ripped off
can i change the old gong sound to next level ?
does anyone know how to change from mpg to km/l
how do I reset my oil light?
you only have 14 volts when the car is running bro if its off your batter will site around 12
forsakensouls I found out later on about the 14 V when cars is running and 12 V when car is off thanks for the info
any time i learn something new every day my self that why i watch these video thank for showing me how to get the cluster codes to work
look in the Description
I ADD A NEW LINK SEE IF CAN HELP YOU unofficialbmw
WHAT CAR MODEL DO YOU HAVE ?
looks like he was working thats why they are like that.! stop hating get out of negative world
my car is 2001 530i
Confusing bro
Bu 8 ojek
Spit it out already
Your doing it for the same reason. You showing off that you can do it to. You don't even speak without studdering.
Dude don't talk too much just go straight to the point 🤦♂️.
Great video man but you should go check your nails man, please go, cut and clean that nails man...