Like how you give the knowledge back to us out here in the world you are true blessing willing to teach us also willing to help us get the build we want
Sent here a few videos ago by dj slim. You have a very educational channel for ahy diy person to learn from. Salute to u and im very thankful for the big fella with the Camaro for inviting me to check out the content. Might be dropping off my corvette one day
Just finished watching your tutorial on the digitizer and you did an outstanding presentation , thanks . My 2018 Chrysler 300 is having with the radio switching stations , the A/C switches temperature by itself among other things . There is that shadow on the screen . I had the problem with the radio switching stations in the past and it was fixed by the dealer , under warranty . Could the problems with my unit be caused by the digitizer or is there more to it . Thank you . Semper Fi
Great video ! Everything worked pretty well .. I cleaned all the goo.. put it back together and there’s still some glitching going on. I had used a thin layer of double sided tape around the edge . Is it better to have the overlay screen close to the lcd screen ? Or set slightly above the? My jeep had a thin edge of tape? around the edge , unsure if there’s anything I did to the overlay screen backing that could cause glitching still.. It’s def better but still some issues
@bj_from_the478 well it didn't go well at all. First off the screws on mine were way too tight to the point where most of the screws were impossible to come off. And secondly somehow I manage to rip the ground wire fml. So that's it I guess for me. I have to buy literally the whole entire radio box.
I’ve been looking around for a while with no prevail. What type of adhesive is used BETWEEN the LCD and the digitizer? I’d assume it would be best to replace that along with the digitizer to prevent the digitizer from sinking in onto the LCD.
Where do I find these screens? My Ram has been driving me nutz! I have had the "Ghost Screen" issue for a while now and nobody seems to want to repair them near me so I found you and I want to try doing it myself. Thanks
@@bj_from_the478 I replaced my digitizer thanks to this video. Thank you! I got one without adhesive applied to the new digitizer. I wanted to let you know I bought Zep 505 degreaser from Home Depot and it worked much better than goo gone.
I’m going through the same issue on my 2017 300. I checked into buying the entire radio 1,999 new. That’s crazy 🤪. Just like you said, it’s a common issue with these Uconnects. So I finally broke down and bought the front piece for 375 on Amazon. Hopefully this one last longer than 5 years.
Do you think putting a screen protector in between the screen n digitizer will stop my glitching cause I still have it happening ? Should it be a lil more spaced out so the glitching stops ?
Really appreciate you showing the work you do on these. Just seeing one come apart shows what needs to be done. Thanks! What I didn’t see was a link to the digitizer you install, but maybe you’ve got that on a website somewhere.
Well long store short some of the oem digitizer cost almost 200$ from the dealership and I buy them in bulk and I offer my services using those digitizers your best option is too go on Amazon and type 8.4 digitizer and read the reviews and make your choice 👍🏿
I follow everything instruction with the exception that I used rubbing alcohol. After all was said and done I realized that the lcd screen was already cracked. Car came like that when I bought it
Good video and quick question: after "sticking" new digitizer to the screen, do you have to press it in some way so the new adhesive is evenly attached and won't have bubbles left etc.? Kind of like putting screen protector on the phone where you can use a credit card to get bubbles out. Thanks again man!
You shouldn’t have any bubbles because the digitizer is not supposed to actually touch the lcd screen just make sure you clean the screen very carefully before installing the new digitizer
I can appreciate you changing the screen but I don’t have the patience so I just ordered the whole front piece for 375.00 on Amazon. Just as fast as you got that front piece off, just as fast the new front piece going on. Love the video though.
Okay I get deals on OEM digitizers when I buy in bulk some my recommendations is too search on Amazon and read the reviews and make your selection carefully based on customer feedback 👍🏿🙏
I used the two products in this video to get the glue off and everything seemed dry, but when I put the new digitizer on I saw something that looked like moisture in the middle of the screen and when I put it in the car that part doesn’t respond to touch…. Do you wait to place the digitizer on after cleaning it? I’ve ordered a replacement and I’m going to try again in a couple days
No I have because it’s very important no too use a chemical like that because your actually clean the lcd screen basically like or home tv and you can destroy them screen
I used 91% alcohol .. cleaned everything and it was better but my screen still gets funky and does what it wants under certain areas.. I bought a new digitizer and it’s worse !!! Should the digitizer be separated by double tape on the edges ? Is it possible the LCD screen was damaged ?
I need alil help my stereo is ghost touching do I need to replace the whole black screen, monitor or the glass digital . Idk if it Needs new LCD r outside digital Glass screen. Came some one help me out
Cleaning the glue film off may help you Butt it’s really a film the had a poor design and started to deteriorate under heat over a period of time so if I was you just change the digitizer and call it a day the new one is better they don’t use the film in them
Great idea Butt this video was made too show the average person using little skill and household tools too fix there radios didn’t want it too be too complicated 👍🏿🙏
Is the ribbon cable what makes the screen's touch aspect work? I separated the digitizer from the screen and got it all cleaned but the ribbon cable that attaches to the digitizer came off and now the the radio works again and doesn't ghost dial but I can't touch anything on the screen. There is no response when I touch anything.
Question... My Uconnect screen still registers my touch and still works but there is no picture. Is that just the LCD panel that needs to be replaced or something else
@bj_from_the478 so the panel itself was fine about 6 months ago then it slowly started going bad. Started with android auto not working or causing a fit whenever it was plugged in. Then the screen started having fits like it would glitch out just the screen but the touch locations were in the same spots
the screen in my charger still comes on there are no cracks or bubbles in my screen it is just completely unresponsive to touch could that be the digitizer?
It might be the center stack. It really Needs a scanner to be hooked up to it and see what the troubled codes are. If you have a code that says video input Malfunction/fault. It might be just the screen. But if you have Can bus data issues you would have to fix those first. It's a very good idea to scan all the modules in the vehicle and make sure There is no Communication codes. Especially from the BCM.
@@bjbell7755 okay sound good Butt I have some more digitizers on order if you’d like and appointment text me your year make and model of your vehicle and we can get the ball rolling 478-262-9307
I used rubbing alcohol , why not to use it ? Now after replacing the screen it don’t work 😭😭, the radio turns on , can’t see any content , it’s blank ..
@@bj_from_the478 yes I made sure of that .. then I looked at the screen closely and noticed I had cracked the actual screen at the bottom right corner that goes to the whole bottom edge 😭😭.. I’m going to order a whole new screen now .. thank you for replying back fast
Авто/Мото
We here big bro. Almost at that 8k subs. We need eberybody to share the video and hit that thumbs up. Bj puts out quality knowledge for us. 💯💯💯🏆
Like how you give the knowledge back to us out here in the world you are true blessing willing to teach us also willing to help us get the build we want
Sent here a few videos ago by dj slim. You have a very educational channel for ahy diy person to learn from. Salute to u and im very thankful for the big fella with the Camaro for inviting me to check out the content. Might be dropping off my corvette one day
I’m on board this video is well detailed and I’m doing mine tomorrow I’m supporting your channel too the upmost 🙏
Nice updated video!! I had to redo mine seems like I didn’t get enough of the glue off from last time lasted a year tho
Wow great job I learned what I needed to know thank you very much very educational
great video. just replaced mine and works just great. thanks for the video.
Glad I could help spread the knowledge 👍🏿
Dope work as always 🎉
Thanks 🙏
Just finished watching your tutorial on the digitizer and you did an outstanding presentation , thanks . My 2018 Chrysler 300 is having with the radio switching stations , the A/C switches temperature by itself among other things . There is that shadow on the screen . I had the problem with the radio switching stations in the past and it was fixed by the dealer , under warranty . Could the problems with my unit be caused by the digitizer or is there more to it . Thank you . Semper Fi
Great video ! Everything worked pretty well .. I cleaned all the goo.. put it back together and there’s still some glitching going on. I had used a thin layer of double sided tape around the edge .
Is it better to have the overlay screen close to the lcd screen ? Or set slightly above the?
My jeep had a thin edge of tape? around the edge , unsure if there’s anything I did to the overlay screen backing that could cause glitching still..
It’s def better but still some issues
Well explain. Thanks brotha. My new cover is coming today and can't wait to install it
Best of luck sir reach out if you need some assistance 🤙🏽
@bj_from_the478 well it didn't go well at all. First off the screws on mine were way too tight to the point where most of the screws were impossible to come off. And secondly somehow I manage to rip the ground wire fml. So that's it I guess for me. I have to buy literally the whole entire radio box.
@@alien_planets_exist1359 not necessarily you may need too ship me your radio and I can fix it for you
@bj_from_the478 really? That's awesome how much do you charge and how far are you from California?
@@alien_planets_exist1359 I’m in ga if you ship it too me it should get too me in three days
I’ve been looking around for a while with no prevail. What type of adhesive is used BETWEEN the LCD and the digitizer? I’d assume it would be best to replace that along with the digitizer to prevent the digitizer from sinking in onto the LCD.
Добрый день. Спасибо большое!
Ваше видео мне очень помогло!
Where do I find these screens? My Ram has been driving me nutz! I have had the "Ghost Screen" issue for a while now and nobody seems to want to repair them near me so I found you and I want to try doing it myself.
Thanks
The dealership wants to replace the entire radio that's not under warranty. It's a known issue on just the digitizer so what a absolute joke Dodge is.
Yeah Butt Cadillac is worse and I charge 1k too fix them and the dodgers run around 400$
@@bj_from_the478 I replaced my digitizer thanks to this video. Thank you! I got one without adhesive applied to the new digitizer. I wanted to let you know I bought Zep 505 degreaser from Home Depot and it worked much better than goo gone.
stealership 😂
I’m going through the same issue on my 2017 300. I checked into buying the entire radio 1,999 new. That’s crazy 🤪. Just like you said, it’s a common issue with these Uconnects. So I finally broke down and bought the front piece for 375 on Amazon. Hopefully this one last longer than 5 years.
Same happened to me didn’t notice til after I purchased now they are saying not under warranty
WHTS UP BRO ILL SEE U TOMORROW ABOUT 11:30 KEEP UP THE GOOD WORK HARD WORK PAYS OFF 💪
Awesome video.
Question : have you ever tried gluing the old screen back on? Or is it best to buy a new screen?
have you ever tried gluing the old screen back on? Or is it best to buy a new screen?
How did you get the radio out? I have a 2018 Ram All Black Version
Do you think putting a screen protector in between the screen n digitizer will stop my glitching cause I still have it happening ? Should it be a lil more spaced out so the glitching stops ?
Do you have a video with you replacing the entire digitizer?
Would a heat gun help In removing the digitizer?
do you have to use any new sticky glue back after removing all the old goo ?
Where do I find the link for the screen? What stands do you recommend?
Really appreciate you showing the work you do on these. Just seeing one come apart shows what needs to be done. Thanks!
What I didn’t see was a link to the digitizer you install, but maybe you’ve got that on a website somewhere.
Well long store short some of the oem digitizer cost almost 200$ from the dealership and I buy them in bulk and I offer my services using those digitizers your best option is too go on Amazon and type 8.4 digitizer and read the reviews and make your choice 👍🏿
@@bj_from_the478 Ok, gotcha. Great that you got a supply chain going for what you do! Thanks much!
Thumbs, up to the video. Where can I buy an OE Uconnect digitizer screen for a dodge charger 2017 in Illinois? Thank you
I buy these digitizers in bulk from my local dealership your best bet is too order a good one on Amazon just read the reviews and make your choice 👍🏿
🔥
I follow everything instruction with the exception that I used rubbing alcohol. After all was said and done I realized that the lcd screen was already cracked. Car came like that when I bought it
Wre did you buy the screen
Good video and quick question: after "sticking" new digitizer to the screen, do you have to press it in some way so the new adhesive is evenly attached and won't have bubbles left etc.?
Kind of like putting screen protector on the phone where you can use a credit card to get bubbles out.
Thanks again man!
You shouldn’t have any bubbles because the digitizer is not supposed to actually touch the lcd screen just make sure you clean the screen very carefully before installing the new digitizer
where did you get the digitizer from?
I can appreciate you changing the screen but I don’t have the patience so I just ordered the whole front piece for 375.00 on Amazon. Just as fast as you got that front piece off, just as fast the new front piece going on. Love the video though.
Ima need a gbody console for Lucille here soon be looking out for me
How can you stop the glue from seeping out from a replacement screen?
👏👏👏👏
Do you have the Mopar part number?
where did you get the replacement digitizer? and if it's 3rd party is it working well with your radio?
Okay I get deals on OEM digitizers when I buy in bulk some my recommendations is too search on Amazon and read the reviews and make your selection carefully based on customer feedback 👍🏿🙏
So no adhesive used with the new digitizer? Just got my new 1 in today and going to install later today or tomorrow
Well your new digitizer should have adhesive strips on it
I used the two products in this video to get the glue off and everything seemed dry, but when I put the new digitizer on I saw something that looked like moisture in the middle of the screen and when I put it in the car that part doesn’t respond to touch…. Do you wait to place the digitizer on after cleaning it? I’ve ordered a replacement and I’m going to try again in a couple days
Okay you probably didn’t
Get all the glue off sometimes you thinks it clean and it’s not
Have you tried acetone? What did it look like installed, send a spot on the screen, ?”
No I have because it’s very important no too use a chemical like that because your actually clean the lcd screen basically like or home tv and you can destroy them screen
I used 91% alcohol .. cleaned everything and it was better but my screen still gets funky and does what it wants under certain areas..
I bought a new digitizer and it’s worse !!! Should the digitizer be separated by double tape on the edges ? Is it possible the LCD screen was damaged ?
Let’s go!!
You said you’d put a link to where to get the digitizer you used but I’m not seeing a link?
I need alil help my stereo is ghost touching do I need to replace the whole black screen, monitor or the glass digital . Idk if it Needs new LCD r outside digital Glass screen. Came some one help me out
You can replace the digitizer and that will fix your issue if you’d like for me too fix we can make arrangements 🙏
Can you use the same screen by just glueing it again? Is the problem with the screen or the lack of glue on certain parts of the screen?
Cleaning the glue film off may help you Butt it’s really a film the had a poor design and started to deteriorate under heat over a period of time so if I was you just change the digitizer and call it a day the new one is better they don’t use the film in them
@@bj_from_the478 thanks I bought a $42k Rubicon just to deal with this crap..
Excellent video BTW. 👍
Can we connect somehow? I replaced the digitizer and display backlights lights up but no display but touch controls work
The backlight lights up but no images and con touch screen and operate controls just can’t see. Is the lcd bad or ribbon issue?
Is necessary reprogram after remplace the screen? thank you for your answer
No there’s no reprogramming involved and if you have a working lcd screen just replace the digitizer
@@bj_from_the478 thank you do you have a website to purchase
If you have access to a 3d printer heat up the bed lay it on there to heat up the adhesive without worrying about getting it too hot in certain spots
Great idea Butt this video was made too show the average person using little skill and household tools too fix there radios didn’t want it too be too complicated 👍🏿🙏
@bj_from_the478 no, I understand I'm just mentioning it incase someone watches this and has the ability to use one.
@@toddcoello6461 I got ya thanks 🙏 👍🏿
Is the ribbon cable what makes the screen's touch aspect work? I separated the digitizer from the screen and got it all cleaned but the ribbon cable that attaches to the digitizer came off and now the the radio works again and doesn't ghost dial but I can't touch anything on the screen. There is no response when I touch anything.
You’ll need too change the digitizer just cleaning the oem part is pretty much pointless
@@bj_from_the478is that only because the ribbon cable became unattached from the digitizer?
Question... My Uconnect screen still registers my touch and still works but there is no picture. Is that just the LCD panel that needs to be replaced or something else
Okay there is a dimmer switch on the left side of the steering wheel make sure it’s not turned off
@bj_from_the478 so the panel itself was fine about 6 months ago then it slowly started going bad. Started with android auto not working or causing a fit whenever it was plugged in. Then the screen started having fits like it would glitch out just the screen but the touch locations were in the same spots
Do you do mail in repairs ?
Absolutely 👍🏿
Where did you live?
I need your services!
Call me 478-262-9307 Monday-Friday 10am-8pm eastern standard time 🙏👍🏿
Do i need any adhesive ?
None at at all
It needs space between the lcd and the digitizer
the screen in my charger still comes on there are no cracks or bubbles in my screen it is just completely unresponsive to touch could that be the digitizer?
It might be the center stack. It really Needs a scanner to be hooked up to it and see what the troubled codes are. If you have a code that says video input Malfunction/fault. It might be just the screen. But if you have Can bus data issues you would have to fix those first. It's a very good idea to scan all the modules in the vehicle and make sure There is no Communication codes. Especially from the BCM.
Hey Im not to far from Macon,GA can I bring my dodge charger to you and have fix my radio?
Sure I’ll fix it
@@bj_from_the478 what’s your shop’s address?
@@bjbell7755 look up Soundsource Macon ga and it will give the address
@@bj_from_the478 alright bet I’ll be there tomorrow morning
@@bjbell7755 okay sound good Butt I have some more digitizers on order if you’d like and appointment text me your year make and model of your vehicle and we can get the ball rolling 478-262-9307
Do you install them for customers?
I sure do if you would like me too fix your radio call me at 478-262-9307 Monday-Friday 9am-8pm eastern standard time 👍🏿🙏
Please tell me your from texas so i can just come to you so you can fix mine
Im located in Macon Ga if you’d like too ship me your radio call me 478-262-9307 Monday-Saturday 10am-7pm 🙏
Which city do you live?
We’re located in Macon Ga
Where is Link for screen
I used rubbing alcohol , why not to use it ? Now after replacing the screen it don’t work 😭😭, the radio turns on , can’t see any content , it’s blank ..
Make sure your ribbon cable is secured properly
@@bj_from_the478 yes I made sure of that .. then I looked at the screen closely and noticed I had cracked the actual screen at the bottom right corner that goes to the whole bottom edge 😭😭.. I’m going to order a whole new screen now .. thank you for replying back fast
Can you do my screen please
How much do you charge to do one for me??
Parts labor and free shipping 400$
My screen is cracked th whole thing I can still touch it and hear the beep beep when touching it
Sure if your screen is cracked and you can still see everything behind it just change the digitizer and you shouldn’t be good 👍🏿
@@bj_from_the478 I can’t see anything is black width green and white and a crack I punched it but I can still touch and itll Beep
🦾🫡