Restart pc, once restarted you have to close any game launchers steam etc. Unplug usb cable, plug it in on another usb port of your computer. Try to do the manual calibration. Those step never failed me but if it still fails for you might have a bad pedal (physical hardware). You might want to ask the store you bought it for warranty or find another youtube guide where they open up the pxn v9 and put wd40 or so, I found one before as I thought I was having a hardware issue but it's not really a hardware issue since manual calibration works for me.
whenever i go to my d input input and try to use my clutch it doesnt work when im in 1-6 and hold my peddle for my clutch down it doesnt rev let me rev my car and it flys threw gears but itdoesnt actully shift ??
restart pc, close launchers like steam etc, then plug usb cable directly on your computer but if it does not work then try another usb port on your computer
I have a proplem when i connect my phone to pxn v9 it says like you have ps3 HIP it ruind my wheel settings (I use PC) And when i click on mod button it dont blink Last proplem is my gas, break and clutch dont work on my pc but it work on pxn v9 tools Can you fix it please?
@@omaralsayed6944 Was that working fine before or it has been like that since you got it? If you press and hold the MODE button for like 20 seconds, it does not even blink or you don't hear any sound on your computer like it detected a new device?
@@DynastyGamingAndTech hello im back, all my problems are gone but i have 1 problem the mode button not working so mode button didnt work since i got pxn and i didnt hear any sound when i hold the mode button
@@omaralsayed6944 Make sure your PXN V9 is connected directly to your computer's usb port. If it is already, plug it in on a different usb port. It happened to me once before that the Mode does not work even if I press and just hold it down for 10 seconds or more. Unplug and plugging it in on another usb port fixed it for me.
unplug usb cable from your computer, plug it in on another usb port on your computer, then try the manual calibration step above, it works for me that way.
broooo it got worse . now its not even pressing the pedal any more edited: sorry bro i did it wrong. i followed your steps and now its completely working
make sure PXN V9 driver is installed from their website then try another usb port on your computer or if you are using a hub, don't connect it to the hub but direct to your computer or laptop port. Try to press and hold the MODE button without doing any calibration just to make sure it's working 100%
@@DynastyGamingAndTech now i got another issue where the accelerator value is going all over the place while I press it and if I press it fully, it goes to 0. And changing USB ports doesn’t fix it.
@@davidm5173 weird, changing USB ports and then recalibrate the same way on the video works for me whenever it happens. Unless something is really busted on your driving wheel. Is that brand new?
@@davidm5173 honestly, I'd just try doing the manual calibration method multiple times because that's what I have noticed on the PXN V9. On my end, it happen on the gas pedal and clutch most of the time. The break never had issues on it when doing the calibration. One more thing on this cheap but good steering wheel... Unplug/replug USB or a simple restart even with the usb cable connected, the calibration won't stick which is why I figured re-creating this video would help other people who didn't notice the issue and would just sell or refund it right away.
i had no launchers opened and tried holding the mode button and nothing happened. for some reason my gas brake and clutch are all mapped to the same thing and the A and B buttons seem to be swapped as well as a couple other things. Ive tried removing the device and restarting my pc but nothing happened
I never experienced that and I don't think the manual calibration might fix that. Was it like that when you got it out of the box? if it is, then return to the seller
@@quesador3049 Driver possible so you could give it a shot on uninstalling and reinstalling it. Program/mode button for triggering the manual calibration? I don't think so but you have a few steps you could do and if all else fails, try it on another pc which never had a pxn v9 to isolate the problem then contact www.e-pxn.com/contact-us
Hi, is that a PXN V9? If so, please do rewatch the whole video. If you are on the main default mode, it's really going to just show limited buttons. If you watch the first minute you will see the demo I made where the controller icon became a keyboard icon which then shows more button afterwards. :)
because it's a manual calibration to make it set to it's default, you really can't do a remap there if you watched the video and my other video about FH5 as well as other PXN V9 even it's guides, I never found an option that you are looking for.
I feel sorry for you. I never update to Windows 11 because there's a lot of issues there. I'll update only on Windows 11 when they stop supporting Windows 10. It's like Windows Vista and 8 all over again :(
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Thanks I'm going to try this because my pedals starts activating halfway
Restart pc, once restarted you have to close any game launchers steam etc.
Unplug usb cable, plug it in on another usb port of your computer.
Try to do the manual calibration. Those step never failed me but if it still fails for you might have a bad pedal (physical hardware). You might want to ask the store you bought it for warranty or find another youtube guide where they open up the pxn v9 and put wd40 or so, I found one before as I thought I was having a hardware issue but it's not really a hardware issue since manual calibration works for me.
Just unscrew the pedal panel and unplug every wire and plug them again or tighten the springs
my accelerator clutch and break are on the same peddle and it wont fix it at all
Turn d input in app
Yo my buttons don’t work and I watched you’re video I unplugged moved it around n what not and I’m still not having any luck
what buttons? restart your pc, close steam or any launchers then try to calibrate again
whenever i go to my d input input and try to use my clutch it doesnt work when im in 1-6 and hold my peddle for my clutch down it doesnt rev let me rev my car and it flys threw gears but itdoesnt actully shift ??
@@itzjoey2396 brand new? if it is and you can't even do this manual calibration which fixes all the pxn v9 issues then you might have a defective one
my accelorator pedal has a big delay and when i push it down all the way it doesnt fully accelorate help
you have to try and try yo recalibrate. thats the only way sad to say. its the downside of this cheap driving steering wheel.
Guys my pxn its not showing on devices and printers can you help me
restart pc, close launchers like steam etc, then plug usb cable directly on your computer but if it does not work then try another usb port on your computer
@@DynastyGamingAndTech thanks i did it
I have a proplem when i connect my phone to pxn v9 it says like you have ps3 HIP it ruind my wheel settings
(I use PC)
And when i click on mod button it dont blink
Last proplem is my gas, break and clutch dont work on my pc but it work on pxn v9 tools
Can you fix it please?
you have to do this manual calibration, Mode should blink if not then try to plug your pxn v9 on a different usb port on your computer/altop
@@DynastyGamingAndTech i downloaded a video on my channel so you can see how you can fix the proplem👍
@@omaralsayed6944 Was that working fine before or it has been like that since you got it?
If you press and hold the MODE button for like 20 seconds, it does not even blink or you don't hear any sound on your computer like it detected a new device?
@@DynastyGamingAndTech hello im back, all my problems are gone but i have 1 problem the mode button not working so mode button didnt work since i got pxn and i didnt hear any sound when i hold the mode button
@@omaralsayed6944 Make sure your PXN V9 is connected directly to your computer's usb port. If it is already, plug it in on a different usb port. It happened to me once before that the Mode does not work even if I press and just hold it down for 10 seconds or more. Unplug and plugging it in on another usb port fixed it for me.
BRO PLEASE HELP !
My gas pedal when i press it the car dont even move 0 what should i do before its go like this not moving it was 50 but now 0
unplug usb cable from your computer, plug it in on another usb port on your computer, then try the manual calibration step above, it works for me that way.
broooo it got worse . now its not even pressing the pedal any more
edited: sorry bro i did it wrong. i followed your steps and now its completely working
yup, most of the time it's a missed step. You can read a lot of people had issues at first but majority are saying it works :)
For me when I told the mode, it doesn’t blink plss help 🙏🏼
I'm sorry to hear that. Have you tried to check if it's working on the smartphone app? V9 Tools? meaning try to switch modes there.
make sure PXN V9 driver is installed from their website then try another usb port on your computer or if you are using a hub, don't connect it to the hub but direct to your computer or laptop port. Try to press and hold the MODE button without doing any calibration just to make sure it's working 100%
I did this and now my accelerator pedal is stuck on. It was acting up before I did this but now it’s stuck.
Happened to me once, just unplug usb cable and plug in on another usb port OR another computer. Then you can manual calibration again.
@@DynastyGamingAndTech now i got another issue where the accelerator value is going all over the place while I press it and if I press it fully, it goes to 0. And changing USB ports doesn’t fix it.
@@davidm5173 weird, changing USB ports and then recalibrate the same way on the video works for me whenever it happens. Unless something is really busted on your driving wheel. Is that brand new?
@@DynastyGamingAndTech I think so. I just ordered it off Amazon this past summer and it worked fine until recently.
@@davidm5173 honestly, I'd just try doing the manual calibration method multiple times because that's what I have noticed on the PXN V9. On my end, it happen on the gas pedal and clutch most of the time. The break never had issues on it when doing the calibration.
One more thing on this cheap but good steering wheel... Unplug/replug USB or a simple restart even with the usb cable connected, the calibration won't stick which is why I figured re-creating this video would help other people who didn't notice the issue and would just sell or refund it right away.
My icon dosent go to keyboard 😮😢 please help
press and hold MODE button for 3 seconds
@@DynastyGamingAndTech yes I did 4 times already it dosent change at all
@@DynastyGamingAndTech my light just blinks but nothing changes
@@DynastyGamingAndTech I just installed the drivers I am going to see if that fixes anything
@@DynastyGamingAndTech I have the pxv900
i had no launchers opened and tried holding the mode button and nothing happened. for some reason my gas brake and clutch are all mapped to the same thing and the A and B buttons seem to be swapped as well as a couple other things. Ive tried removing the device and restarting my pc but nothing happened
I never experienced that and I don't think the manual calibration might fix that. Was it like that when you got it out of the box? if it is, then return to the seller
@@DynastyGamingAndTech it worked fine before but now it’s doing that, could it have anything to do with the program button or driver?
@@quesador3049 Driver possible so you could give it a shot on uninstalling and reinstalling it.
Program/mode button for triggering the manual calibration? I don't think so but you have a few steps you could do and if all else fails, try it on another pc which never had a pxn v9 to isolate the problem then contact
www.e-pxn.com/contact-us
@@DynastyGamingAndTech Ok so I updated the firmware and it seemed to have fixed it so hope that helps anyone else
@@quesador3049 thanks for the update, enjoy!
mine only have 13 button available
Hi, is that a PXN V9?
If so, please do rewatch the whole video. If you are on the main default mode, it's really going to just show limited buttons.
If you watch the first minute you will see the demo I made where the controller icon became a keyboard icon which then shows more button afterwards. :)
When i hold the mode button it doesnt blink after holding it
unplug the usb cable, close steam then plug the usb cable again
do i have to download the file so the mode button will work? i don't have it installed and i hold it and doesn't do anything so..
the file from pxn v9 website? yes, without it; windows will just recognize your pxn v9 as a normal xbox standard controller.
Alright
You didn't show how to map the buttons
because it's a manual calibration to make it set to it's default, you really can't do a remap there if you watched the video and my other video about FH5 as well as other PXN V9 even it's guides, I never found an option that you are looking for.
@@DynastyGamingAndTech thank you
@@THEHILLSMIGHTHAVEEYES no worries, enjoy gaming.
how do i pull that site up
which site are you talking about?
I cant do it in windows 11
I feel sorry for you. I never update to Windows 11 because there's a lot of issues there. I'll update only on Windows 11 when they stop supporting Windows 10. It's like Windows Vista and 8 all over again :(
FIX YOUR MONITOR
what fix do you mean?
@@DynastyGamingAndTech lol it was just weird on camera
@@Infxn1ty coz I'm using my other hand and it's hard hahaha sorry bout that