Thanks bro! Working like a charm now. Out of the box with no real instructions I thought this wheel was garbage. Working like a $300 wheel setup now. Thank you.
Thanks to you I was able to get my computer to recognize my steering wheel well, I had to update the driver, that was all. Good luck to you in everything. Greetings from Chile.
I was the 130k viewer. Anyways, thank you for the help, I was wondering why I only had 10 buttons. Your the best youtuber and you are very underrated. :)
THANK YOU so much for this video! I just got this and was trying to get it to work with the shifter in ETS2 and I didnt realise it switched modes to the simpler mode. This Video showed me how to go into the properties and see which icon it was and fix it all up. Thank you again so much for this video. 🙂
Great job Man 🎉 allmost gave up with this steering wheel. beacouse pedals have had no reaction in game and I dont have any instruction to this wheel. After Your videos I just reset and the steering wheel start working like new one. Btw. sorry for my english 😅
Man , you are so good doing this. I was confused and almost gave up on PXN v9. Now you showed me how to go into the property and see what is working and how to clear the programing to their default and reprogram it. Could you do a video on how to set it up on American Truck Simulator or Euro Truck?
Video helped a lot with the set up, it works but only 1st and 2nd gear work as buttons 17 and 18. All other gears show buttons 17 and 18 too. I have the app and it’s showing the same thing, any advice?
I tried this wheel and there were multiple problems, the metal on the pedals were very sharp on the edges. So be careful! The clamps for the wheel were very large so my knees would always be in the way. Tell me if you also had this problem. Finally, the angle of the steering wheel was very high and only suitable for trucking games. Despite the fact that this wheel is cheaper, I personally think that the Logitech G29 is a much better racing wheel and worth the money.
Yes same problem with the clamp I just adjusted the pedal aligned to the steering wheel. As for the sharp plates on the pedal I haven't encountered any.
@@lokepameGG The angle I meant by the angle of the wheel to the base. Not the in game driving angle. I know how to switch but it's fine now I'm using the G29
it is not meant for the controller the xbox came with, the xbox series controllers are TYPE-C, you'd probably need to find a usb to USB C. then plug it in to the back with the USB
Shoutout sir..ung games po ba sir san po pwede download po salamat sir,ano po ung mga games mo sir jan para may maga idea ako sa install ko ..plano ko kasi bumili din
Sadly I only use Xinput. Dinput (with shifters) I cannot use even with the MS store version. They told me you need an older version. Downloading alone and uninstalling and reinstalling takes time and I have ran out of time to do it. Sooner not later :(
I just got the PXNV9 I’ve tried everything press on the brakes and the engine revs up got it to Finley move but would not go in reverse and the settings go back to original can you please help don’t know how to get into contact with someone for information very frustrating
For some reason in the middle of a race when I changed to gear number 3 my car went into neutral and when I checked the device I told myself that when I press gear 3 and 6 the brake is pressed, I don't know what to do, will you help me?
Goodpm sir i need ur help kakabili ng asawa ko ng Pxn v9 the prob is we tried to operate and follow the instructions very well but may part na hindi nawwork we tried 3 sec. Press sa mode biglang nawawala yung nakasulat na input D sir. Whats the solution? Lahat po nagwwork doon po kami nawawala at natatagalan
Hello, nakapagdownload napo ng v9 sa fone at naiconnect na sa laptop pro bakit po kaya ayaw lumabas ng game kahit siniselect na ung Open sa app ng game sa fone
Hi! Kabibili ko lang ng pxn v9 ko and tinry ko siya sa beamng drive, yung clutch niya is nasa 50% lang kahit di ko naman pinipindot tas nalaman ko yung sa calibration y-axis pala siya and nasa middle ang point ng x and y axis kaya naka 50% siya sa game. Tinry ko na i calibrate gumana naman siya pero hindi siya pure fix, yung pagtapak is 0 jump to 50% kaagad then normal na yung 50 to 100% Alam mo ba kung paano siya maaayos?
I don't know if anyone else has this same problem but I bought the pxn v9 steering wheel, everything is correct but when I downloaded forza horizon 5 I don't get the option to configure the steering wheel and when I enter the game the gearbox doesn't work, someone kind enough to give me an idea solution :(
Mine is automatically detected check in the settings in ETS if vibration is enabled. Also download the latest driver (also featured here) to check if vibrations do work on your PXN V9.
Product description here: shope.ee/8etvXx5fDE
Sir, my pxn v9 is always blinking and not working.
Thanks bro! Working like a charm now. Out of the box with no real instructions I thought this wheel was garbage. Working like a $300 wheel setup now. Thank you.
Glad I could help
Thanks to you I was able to get my computer to recognize my steering wheel well, I had to update the driver, that was all. Good luck to you in everything. Greetings from Chile.
I was the 130k viewer. Anyways, thank you for the help, I was wondering why I only had 10 buttons. Your the best youtuber and you are very underrated. :)
Wow, thanks!
THANK YOU so much for this video! I just got this and was trying to get it to work with the shifter in ETS2 and I didnt realise it switched modes to the simpler mode. This Video showed me how to go into the properties and see which icon it was and fix it all up. Thank you again so much for this video. 🙂
Glad I could help!
Is there delay on the steering wheel
Do u know how to turn on the shift stick? On PS4
my dad bought me this for my birthday and it not working and now i saw your video it help me so much
damn sobrang dami ko pinanuod eto pinaka complete at na solve ang problem ko. thank you sir
How far can the table clamp for the wheel go?
Great job Man 🎉
allmost gave up with this steering wheel. beacouse pedals have had no reaction in game and I dont have any instruction to this wheel. After Your videos I just reset and the steering wheel start working like new one.
Btw. sorry for my english 😅
Glad I could help
Thanks for this guide dude!
Do u know how to turn on the shift stick? On PS4
Man , you are so good doing this. I was confused and almost gave up on PXN v9. Now you showed me how to go into the property and see what is working and how to clear the programing to their default and reprogram it. Could you do a video on how to set it up on American Truck Simulator or Euro Truck?
Thanks mate might do the tutorial on setting this on ETS soon
@@dehnermdeleon can you please do a set up on American trucking simulator I’ll pay you for your time
Video helped a lot with the set up, it works but only 1st and 2nd gear work as buttons 17 and 18. All other gears show buttons 17 and 18 too. I have the app and it’s showing the same thing, any advice?
Switch from X input to D input it might work
Which is the input option for forza horizon 4 ? X input or D input ?
X-input on my FH4 Steam. H shifter not working :(
shifter is not working in racing games,only in simulator games
THANK YOOU!I could NOT figure out the clutch and stuff.NOW IT WORKS!
My phone wont connect to the wheel's bluetooth help! Pxn v9 just disappear when I tap on it
It should be automatically detected. try using another phone if it still does not work you may contact PXN customer support
salamat bro excited na ko
why in windows 11 didn't change to d input?
looks like there's a patch needed for PXN to work with Win 11
thnk u sm your very helpful
thx y my frend u save me, love u❤❤❤❤❤❤
Great job man, really helpful.
OMG man I don’t know how to thank you you saved my life thank you so much you are the best
Thank you so much, i couldnt understand why my Steering wheel wouldnt work on ets2 and assetto corsa, Cheers!
You're very welcome!
my shifter does not have all 6 gears, it only recognizes gear 5 (for 1,3,5) and gear 6 (for 2,4,6).
do you know how to fix it?
What mode are you on? X or D? should be D in order to show all shifters
I can change from X input to D input plss help
Win 11? common issure now
Hey my shifter on goes to 1 and 2nd gear can you plz help me with that
And I did the test thing and it only goes to 17 and 18 no matter we’re I put it
For me there is no accelerator brake and clutch option and I have13 buttons pls help
I tried this wheel and there were multiple problems, the metal on the pedals were very sharp on the edges. So be careful! The clamps for the wheel were very large so my knees would always be in the way. Tell me if you also had this problem. Finally, the angle of the steering wheel was very high and only suitable for trucking games. Despite the fact that this wheel is cheaper, I personally think that the Logitech G29 is a much better racing wheel and worth the money.
Yes same problem with the clamp I just adjusted the pedal aligned to the steering wheel. As for the sharp plates on the pedal I haven't encountered any.
@oxyjun maybe you're using the 900 degree setting, you can switch it to 270 degrees for racing games, you can find the switch under the steering wheel
@@lokepameGG The angle I meant by the angle of the wheel to the base. Not the in game driving angle. I know how to switch but it's fine now I'm using the G29
@@jun_chung try proping up the end of the base with a book that flatens out the wheel
higher price,better gear..that should be..ryt? pxn is half the price of g29 ...
I have connection problems with my ps4 it randomly disconnects and its really hard to connect it again
Any PS 4 users out there to help?
Yo bro i love how og you keep you reviews 💯 keep it up much love
what settings do you have for Froza if i may ask? thank you btw! you're a life saver!
Forza in my case is just X input. I was not able to work the shifters
do you need to do the stuff on the phone cuz just looks the same as the bit before
Yes once you've done it it's ok not to do the app config.
Best video ever
Hi, Thank you for your help. But my pedal input is only 0 or 100%, and I can't control it progressively. Can you tell me some solutions?
I think you need to clean the sensors. This might help but it's Indonesian ruclips.net/video/iSiczgVDSz8/видео.html
Sir, instead na controller ang ilagay sa usb slot. pwede po bang usb handbrake??
Never ko pa na try.
Any fix on shifter being only working buttons 19 and 20 and not going from 17-22 when going from first to 6th
Try switching from X input to D input
I just ordered one and wen I plug into back of my PC the light indicator doesn't glow at all...
You can have it replace it should have lights on when plugged vis usb
Where can you find the new drivers for? I seem to can find them anywhere
Here mate www.e-pxn.com/support
grabe thank you po!
Why i cant set my gear thing it wont show up
where do u connect the handbrake
I just assign the button.
Forza in stream can use this?
I believe it only works with the version on the Microsoft store
Sadly only X-input no shifters on my version of FH4 Steam
I cant see the vibration test for the config
You need to update the firmware also in the vid.
لدي عجلة القيادة مع ناقل الحركة ... لكن لا يمكنني تفعيل خاصية الاهتزاز. في Euro Track ... كيف أفعل ذلك
I did everything I was supposed too and my wheel is not working on my Xbox series x I don't know why please help
I don't have Xbox to test. But you can try the app to see if the parameters are working,
it is not meant for the controller the xbox came with, the xbox series controllers are TYPE-C, you'd probably need to find a usb to USB C. then plug it in to the back with the USB
great job 100% we need more people like you to exsplain things like you do. many thanks
I appreciate that!
Do we need a PS4 or we can just connect it to the pc and play
PC plug but with minor tweaks
Shoutout sir..ung games po ba sir san po pwede download po salamat sir,ano po ung mga games mo sir jan para may maga idea ako sa install ko ..plano ko kasi bumili din
Usually sa steam marami if not search lang sa google dami sites to download :) Can't state here baka ma block
I figured it out! Here's how to get the Shifter in the 7th position for Reverse: ruclips.net/video/PrgQ60Y5NwE/видео.html
Do u know how to turn on the shift stick? On PS4
My pedals are stuck at 200 value, any one know a solution.
Opening the pedal will reveal the sensor. Some suggest to put lube on the spring of the defective part of the pedal. Base on the forums I've been.
Thank you sir 👍🏻
Do u know how to turn on the shift stick? On PS4
how do you use this with Forza horizon 4 because the wheel option does not show up for me???:
Sadly I only use Xinput. Dinput (with shifters) I cannot use even with the MS store version. They told me you need an older version. Downloading alone and uninstalling and reinstalling takes time and I have ran out of time to do it. Sooner not later :(
Mine won't shift into 3rd gear on shifter
Oh better call PXN V9 support or your supplier for this. Have you tried other games with shifter like City Driving?
@@dehnermdeleon I downloaded the app and it works now
Is it compatible po on entry-level PCs? I want to get one po for my PC (which is entry-level).
I have a good entry level pc works grate the phone app is a must have
Can you Detach the wheel from the base?
sadly no
do you need to install a driver for this? or automatic makikita na po agad sa devices and printers
Automatic makikita pero if you need the updated one pwede mo rin install
I just got the PXNV9 I’ve tried everything press on the brakes and the engine revs up got it to Finley move but would not go in reverse and the settings go back to original can you please help don’t know how to get into contact with someone for information very frustrating
What game you playing? Is it ETS on PC? sync the game on the app first.
sir how to set up Xinput sa FH4 steering wont turn
Is this on PC? Long press the mode button. Or use the mobile app to easily determine which mode are you in.
When I press the mode button for 3 seconds to change it to keyboard input, nothing happens at all
Is it Win 11 OS? looks like there's a patch needed for PXN to work with Win 11
Sir pwede ba sa forza horizon 5 steam version yung pxn v9?
For some reason in the middle of a race when I changed to gear number 3 my car went into neutral and when I checked the device I told myself that when I press gear 3 and 6 the brake is pressed, I don't know what to do, will you help me?
Please check if mapping is properly set on your shifter (depends on the game)
what should i do?
Goodpm sir i need ur help kakabili ng asawa ko ng Pxn v9 the prob is we tried to operate and follow the instructions very well but may part na hindi nawwork we tried 3 sec. Press sa mode biglang nawawala yung nakasulat na input D sir. Whats the solution? Lahat po nagwwork doon po kami nawawala at natatagalan
Is it Win 11? This is a common issue lately. Nag update na rin ba kayo ng PXN?
What do I do when I press mode and nothing happens??? PLEASE HELP
Try the app instead. or update the pxn v9 software
can this wheel work on rfactor 1?
this is helpful, thank you so much 👍
Glad it was helpful!
Can someone help im connect to pc and the wheel is not connected
Try the mobile app then we can tell if it's a defective hardware
@@dehnermdeleon nope i tried on other pcs and it works but on mine it just says driver not installed
Ciao, ma come lo hai collegato tramite Bluetooth? ne il mio iphone ne il tablet androi lo rilevano.
it should be detected automatically. Worst case is u had a defective bluetooth receiver on the pxn wheel
My light just turns on then off when I plug it in
hi sir what game is best for PXN v9 which uses the clutch pedal?
ETS2 and Forza Horizon 4 (Microsoft version)
i played grandturismo on pxn V9 and there’s no vibration even though i’ve enabled it
i cant shift mode
only ETS and ATS, as for Forza no shifters.
hi sir may problem ako sa pxn v9 ko yung accelarator naman sinelect ko pero bat sa brake naandar
Baka X-input boss
Can I use it to play games without installing the driver?
Yes.
thank you so much
kakabili ko lang ng akin sir mejo mabigat pla ang handling nya is there a fix para mabawasan ung back force ng wheel?
So far you can adjust the vibration on the updated driver if you download it here. www.e-pxn.com/products/racing-wheel/pxn-v9#supt
Hello, nakapagdownload napo ng v9 sa fone at naiconnect na sa laptop pro bakit po kaya ayaw lumabas ng game kahit siniselect na ung Open sa app ng game sa fone
Bro ano game nilalaro mo? Meron na naka install sa PC? Kasi yun sa app yun wheel settings lang ang niloload.
Does pxn v9 has force feedback?
Yes but just a little bit vibration not really forcing the steering to fight back based on your run/ turn.
Compatible po ba to sa steam?
yes sir!
Does it work on xbox one s?
Does it support all games?
I only based on the app where the games are available. But there's no harm to explore.
boss kailan bang e connect ang v9 sa pc
yes need dapat ams ok if may app para ma calibrate at ma test
Idol kaylangan ba my cd game pag mag lalaro ka ng pxn v9 sa pc?
Di naman working naman sa downloadable titles like ETS and Forza
pwede po ba to sa PS4? I want to play F1 2020 with streering wheel
Sorry just tried this on PC. Maybe other fellow sim drivers can answer your query
May kasama na po ba na clamp pag binili Yung steering wheel
Yes boss!
Can I play American truck simulator with that wheel?
Yes!
Hi! Kabibili ko lang ng pxn v9 ko and tinry ko siya sa beamng drive, yung clutch niya is nasa 50% lang kahit di ko naman pinipindot tas nalaman ko yung sa calibration y-axis pala siya and nasa middle ang point ng x and y axis kaya naka 50% siya sa game. Tinry ko na i calibrate gumana naman siya pero hindi siya pure fix, yung pagtapak is 0 jump to 50% kaagad then normal na yung 50 to 100% Alam mo ba kung paano siya maaayos?
May kinakalikot sa pedal mismo para ma adjust yun sensor. Some applied lube or wed40 sa spring pero di ko pa na try. Kasi working nman sa akin
Sir, natry niyo na sa bus simulator 18? Pano kaya i-configure yon?
Hindi ko pa na try sorry.
Pwede po ba iconnect ang pxn v9 sa smart tv?
Ah hindi kasi Windows system lang itong PXN V9
I don't know if anyone else has this same problem but I bought the pxn v9 steering wheel, everything is correct but when I downloaded forza horizon 5 I don't get the option to configure the steering wheel and when I enter the game the gearbox doesn't work, someone kind enough to give me an idea solution :(
It's my problem since FH4. Never had a workaround sadly
how do u upload the driver
Here dude just download the driver and update www.e-pxn.com/products/racing-wheel/pxn-v9#supt
I pressed mode and it didn't flash
Is it Win 11? This is a common issue lately
How to revers on euro truck?
Input Wizard > H shifter > and on Reverser set your gear to 6th (doesn't matter if your in Hi-Lo gear) I will create another video for this.
Tara!
Pwede ba sa laptop?
pwede basta Win 10 onwards or depende sa game na ilalaro mo.
Worth for the low price?
For entry level yes this is good.
Can you quick release it pls I really need this info
Not much since it will take a while to unscrew the clamps
I love you :DD
Tanong lang meron po ba yan sa shopee or sa Lazada?
Yes meron pa boss not sure if may sale.
thanks bro
Boss pano magdl ng truck simulator
Steam legit or fitgirl repack boss search mo lang
I have this steering wheel with the transmission... but I can't activate the vibration feature. In Euro Track... How do I do it
Mine is automatically detected check in the settings in ETS if vibration is enabled. Also download the latest driver (also featured here) to check if vibrations do work on your PXN V9.