Your work is always perfect and inspiring. Your working space is always as clean as an operating theatre. Thank you for sharing your knowledge and expertise.
It is so gratifying to see everything work out perfectly - and for the most part in stark contrast with one's own fumbling around the lathe. すべてが完璧に機能するのを見るのはとても喜ばしいことです - そしてほとんどの場合、自分自身が旋盤をいじるのとはまったく対照的です
Great idea! To be honest though, I would never let my live centers get into that condition. I'm very careful with how much pressure is being applied to the work piece, etc. However, if a live center does get scored up, I will keep this in mind! Thanks for sharing!
I've marvelled at your cleanliness (and skill) in another post but I think I have worked it out ..... This is the machinist equivalent origami 😉. Thank you for sharing.
I love your videos, they are so educational and at such high level. I have learned so much from your videos, thank you very much for sharing your knowledge.
I made two pipe centers for smaller lathes. #2 Morse Taper. Both had a Zerk fitting in the nose. Ran a socket with a universal in a collet engaged with the Zerk. Used that to drive the center. Cut the center cone in the lathe. One 60° included. The other 90° included. Used double row bearings.
9:30 nice video but 1) it doesn't matter to measure the tailstock, it is always in the centre, if it is not, it is because it is broken 2) you dont grind the tailstock, you lose the cemented layer and it continues to get damaged expecially with harder matarials, change it or after grinding it, send it for a heat treatment to regain the cemented part
Хорошая работа, сделано отлично. Вам бы камеру отдельно на штатив поставить. Такое чувство что вы крепите её на станке и из-за вибраций она постоянно пытается поймать фокус, из-за чего теряется резкость картинки в динамике.
А сколько раз тьй видел такой вращающий центр? Для обьйчнйе центрьй етот метод не годится. Измерение биение неправилно, потому что не удалили ремень. Поищи канал Виктора Леонтиева, мастерство там на 3 порядока вьйше, там и увидиш как шлифоват всякие центрьй, а не только такие как в ето видео.
Exelente técnica amigo me gustó yo lo hecho pero desarmar el punto y centrar con el reloj y lo rectifico con la herramienta de corté pero así es mucho más precisó 🙏👍
Thank you for watching. Do you mean the angle between the grindstone and the grinding surface? The aluminum body of this die grinder and the whetstone are almost parallel, so I put the dial against the aluminum body of the die grinder and turned the handle to adjust so that the needle would not move.
I used to have OD grind rotary bushing. Set up the bushing on a tapered arbor. Use a hose clamp with an allen wrench welded to the adjustment screw. Tighten the hose clamp. Setup so that the Allen wrench is keep the arbor from turning. Drive the outside of the rotary bushing with the driver on the head of the grinder. This way the body of the rotary bushing is turning on its own bearings. We also used to ID grind the inside of spindles for multiple drill heads. On a center in the headstock. You figure out how.
Thank you for watching. The height of the whetstone should be adjusted accurately, but if it is even slightly lower, the whetstone will bite into the material, which is not good. So make it exactly the same height or slightly higher. The rotation of the center and the rotation of the grinding wheel are in the same direction, so the contact speed is faster. The die grinder can only be rotated clockwise, so the cordless drill driver is rotated counterclockwise.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
nc旋盤工です。普段普通旋盤はあまり使わないのでとても勉強になります。
また、コメントから世界中からアクセスがあるかと推察致します。世界の旋盤技術向上に寄与されていることに心から感動します。私も世界に貢献するものづくりが出来るよう精進いたします。
ご視聴いただきありがとうございます。
また、嬉しいお言葉を下さり誠にありがとうございます。とても励みになります。
ゆっこゆ様もお体に気をつけて頑張ってください。
Thanks for very good techniques ,clear steps,full of details,I’m a retired mechanic ,from Thailand.
まずアイデアがすげぇわ…
そしてそれを実現する技術力。
Your work is always perfect and inspiring. Your working space is always as clean as an operating theatre. Thank you for sharing your knowledge and expertise.
Прекрасная работа. Так точно и красиво. Приятно смотреть. Спасибо.
Lo felicito por su iniciativa, por aportar conocimiento y porque sus ideas facilitan el trabajo. Saludos desde Colombia.
Perhaps, you're capable to make a wrist watch for ants. I admire this level of skills, huge respect!
It is so gratifying to see everything work out perfectly - and for the most part in stark contrast with one's own fumbling around the lathe. すべてが完璧に機能するのを見るのはとても喜ばしいことです - そしてほとんどの場合、自分自身が旋盤をいじるのとはまったく対照的です
Great idea! To be honest though, I would never let my live centers get into that condition. I'm very careful with how much pressure is being applied to the work piece, etc. However, if a live center does get scored up, I will keep this in mind! Thanks for sharing!
Very nice! Beautiful result. And thank you for the instruction on making the belt! I was wondering how difficult that would be!
Perfect work! Now i have a reason to buy a used live center. Thank you for the video. Regards from Germany.
and you'll be surprised to find out it's a different design and this method won't work
@@kisspeteristvan Depends on which type he buys.
Спасибо за урок, мастер! Отдельное спасибо за аккуратное отношение к станку, Вы закрываете от абразива его части!
I've marvelled at your cleanliness (and skill) in another post but I think I have worked it out ..... This is the machinist equivalent origami 😉. Thank you for sharing.
So today I will write this one sentence: あんな作業が好きです。
This is a stroker genius can't wait to try it on my machine
私も参考にして土日に片っ端から綺麗にしてやろうかと思います。
古くなったからとすぐ新しいの購入したかるので
Another lesson for my studies thank you so much Swap Lamp
Very good but take another stone and dress the wheel everytime you chuck it up. Improves finish and smooths out any vibration.
Mike
Rectificado perfecto y efectuado con un método simple y creativo👍✅
なんか癒される。
相変わらずおもろいよほんと
Excelente y muy prolijo para sus trabajos, saludos desde Argentina.
I love your videos, they are so educational and at such high level. I have learned so much from your videos, thank you very much for sharing your knowledge.
勉強に成りました！😂
Wow you do some great projects
Excellent job, great video as always..
Very nicely done. Nice restoration on that center.
好想学习他的的技术，好像拥有一套这样的设备，非常好的视频👍谢谢！
Proper job. Subscribed!
Maravilhosa mecânica parabéns forte abraço
ótimo trabalho, ficou perfeito.
Top precision work
Thank you for sharing Your Creativity! 😎
Thank you for sharing. Respect from Iraq.
Wow, very good work. Regard from Italy 👏🏼👏🏼
C'est très ingénieux, bravo.
Ottimo lavoro, dovrò farlo anch'io. 👍
Your videos are superbly filmed
Красавчик. Работа отличная.
👍👍👍 Здоровья тебе и удачи.
You should have dressed the wheel once it was mounted in the grinder, and you will get a better finish
I made two pipe centers for smaller lathes. #2 Morse Taper. Both had a Zerk fitting in the nose. Ran a socket with a universal in a collet engaged with the Zerk. Used that to drive the center. Cut the center cone in the lathe. One 60° included. The other 90° included. Used double row bearings.
That was super smart how you set up your equipment, awesome work 👍....thanks for the video
Great job.
Good tool and style performance
Beautifully done!
Very precision machinist.
9:30
nice video but
1) it doesn't matter to measure the tailstock, it is always in the centre, if it is not, it is because it is broken
2) you dont grind the tailstock, you lose the cemented layer and it continues to get damaged expecially with harder matarials, change it or after grinding it, send it for a heat treatment to regain the cemented part
Great video
Thanks for sharing.
Хорошая работа, сделано отлично.
Вам бы камеру отдельно на штатив поставить. Такое чувство что вы крепите её на станке и из-за вибраций она постоянно пытается поймать фокус, из-за чего теряется резкость картинки в динамике.
Yes!
That's the way to do it when you are a pro and take good care of your tools. :)
it's a pleasure to watch
Just fantastic!
eu amo o seu canal !
fantástico !!
I like your idea dear man 💫 waiting to see your next project 🙏
Спасибо большое за идею ❤️
Fine 😉 and precise..
Well done, friend
Very warm comments! I join! I will also be glad if you rate my videos. In the last video, I made a ring with sapphires from a titanium pipe.
12:55 that’s so satisfying
Insane work!
For not owning a grinder this is not bad. I do use grinders and would make work of this in minutes.
Did you consider using an o-ring for the drill drive belt?
phenomenal tolerances.
a pure joy to watch
excelente forma de rectificar
Хороший пасик (ремень) получился!
Такие работы надо показывать как эталонные👍👍👍
А сколько раз тьй видел такой вращающий центр? Для обьйчнйе центрьй етот метод не годится. Измерение биение неправилно, потому что не удалили ремень. Поищи канал Виктора Леонтиева, мастерство там на 3 порядока вьйше, там и увидиш как шлифоват всякие центрьй, а не только такие как в ето видео.
Автор конечно 👍 хороший, но до эталона не дотягивает. Эталон это Виктор Леонтьев, советую ознакомиться с его видеоматериалом
Nice job and effort
Very warm comments! I join! I will also be glad if you rate my videos. In the last video, I made a ring with sapphires from a titanium pipe.
@@jewelator ill check that out if i dont forget 😅😅
@@christianpaulroldan4010 Thank you! I hope I don't disappoint.
@@jewelator where is that your video you're speaking?
عندما تجتمع المعدات الجيده بيد شخص عبقري
يكون الابداع منقطع النظير 👍
Мозг инженера в действии: нестандартная задача - нестандартное решение, и блестящий результат!
Very nice. 👍🏻
120番からの、鏡面仕上げに入るかと思ったら違った😁
Did you dress the stones separately ? Nice result
Thank you for watching.
The stone was previously dressed.
Exelente técnica amigo me gustó yo lo hecho pero desarmar el punto y centrar con el reloj y lo rectifico con la herramienta de corté pero así es mucho más precisó 🙏👍
Looks superb
ASMR !! Beautiful !
You Sir, have earned a Subcriber for life!
I love the grinding attachment you have. I have wanted to grind spindles for some time but i struggle getting the angles right. How do you do it?
Thank you for watching. Do you mean the angle between the grindstone and the grinding surface?
The aluminum body of this die grinder and the whetstone are almost parallel, so I put the dial against the aluminum body of the die grinder and turned the handle to adjust so that the needle would not move.
Professional 🔥🤩👌👌👌👌👌👌
excellent !
Wouldn’t the oil on the tip of the tool instantly be removed by the friction and shavings and if so what’s the point?
I wonder if some of the grit from the abrasive finds it's way into the live center bearing.
Brilliant! 👍🏻
My bro went god mode
Congratulations on this great demonstration. Do you have a link to purchase the grindstone? Best wishes. P.K.
Thank you for watching.
I purchased it from Amazon in Japan.
www.amazon.co.jp/gp/product/B002NAR77E/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
素晴らしい仕上がりですね
ぜひこの加工のエッセンス
頂きたいものです
I used to have OD grind rotary bushing. Set up the bushing on a tapered arbor. Use a hose clamp with an allen wrench welded to the adjustment screw. Tighten the hose clamp. Setup so that the Allen wrench is keep the arbor from turning. Drive the outside of the rotary bushing with the driver on the head of the grinder. This way the body of the rotary bushing is turning on its own bearings. We also used to ID grind the inside of spindles for multiple drill heads. On a center in the headstock. You figure out how.
Good work
Very warm comments! I join! I will also be glad if you rate my videos. In the last video, I made a ring with sapphires from a titanium pipe.
@@jewelator ok sir. I'm also just learning to make a wood lathe video
@@ijuppas I'll take a look!
Nice Job
The amazing 👍
Awesome!
Beautiful
bravo bon travail nickel
Thanks for share!
What is the cutting lub are you using there?
thanks!
Thank you for watching.
I use Castrol Variocut C210 cutting oil.
Is centring the grinder's height very critical? And does the center rotates the same direction as the grinder but slower?
Thank you for watching.
The height of the whetstone should be adjusted accurately, but if it is even slightly lower, the whetstone will bite into the material, which is not good. So make it exactly the same height or slightly higher.
The rotation of the center and the rotation of the grinding wheel are in the same direction, so the contact speed is faster.
The die grinder can only be rotated clockwise, so the cordless drill driver is rotated counterclockwise.
Nice video
Very warm comments! I join! I will also be glad if you rate my videos. In the last video, I made a ring with sapphires from a titanium pipe.
Brilliant!
Very nice!!
Thanks for sharing
When I first watched these, i thought they were large till the hand came in to show its actually smaller than I thought for size comparison.
So nice
P E R F E C T !