1:45 when you have the control arms with two sides, if and arm one doesn’t lineup at a perfect 90°, pull it off the spline and turn it 180°, the splines are offset just a little so that if one arm doesn’t come off perfectly perpendicular (T) the other one will. This way you won’t lose any percentage of the servo throw by using the radio offset feature.
I am primarily a 3d heli guy and this is my first wing. Initially I had no idea how to program my DX8 and your video helped me a lot! Thank you! Cheers!
My allula arrived friday they have added a third magnet to the cockpit . I used a park-n-power lipo 3.7V 600mah 1s battery and used a 5V TURNIGY Voltage Booster , turnigy TS541A servos .
1:45 when you have the control arms with two sides, if and arm one doesn’t lineup at a perfect 90°, pull it off the spline and turn it 180°, the splines are offset just a little so that if one arm doesn’t come off perfectly perpendicular (T) the other one will. This way you won’t lose any percentage of the servo throw by using the radio offset feature.
…And using a pair of flush-cut pliers, cut off the unused arm.
I am primarily a 3d heli guy and this is my first wing. Initially I had no idea how to program my DX8 and your video helped me a lot! Thank you! Cheers!
My allula arrived friday they have added a third magnet to the cockpit . I used a park-n-power lipo 3.7V 600mah 1s battery and used a 5V TURNIGY Voltage Booster , turnigy TS541A servos .
Best review ever! Now I'm going to build my own. Thanks for all info.
+Leif Bergman Thanks :)
Hi there!
I have the exact same setup as you, did you have any problems with the power or lack of?
Hi I find this video very useful thanks!
But did you only moved the rudders a little bit to make them free or had you make some cuts too?
+SngGenius I havent done any cuts
Hint to not loose those small screws (or to find it, if lost)
USE A MAGNET
to hold (or find) them!
Doch nu DX8 und ned Taranis? ^^
TheGameR985 Hab nu kan kleinen RX für FrSky :P