I built your 19/26 for my first build ever - came out BEAUTIFULLY btw - and called it the Hayek. You know - short, top-heavy, badass? No? I'll show myself out.
@@thateffinguy2422 is The White Death a 5'2" busty mexican-american A-list actress? and I DID print it in a light gray sooooooo not too far off i guess
They look good idk man mine look similar on my cheap ender clone and all I did was level it and put the mm height super low tuning and long print times are how it's done 3 days for a ar lower but the sides were completely smooth like it wasn't even printed
@@popinmo ive been weary about printing at low layer heights. ive never “tested” my prints (yet) so im essentially bullshitting you right now, but from what i understand you get better strength with taller layers (sacrificing detail of course, which is more noticeable on stippled/engraved style designs and maybe a problem for frames with intricate internal design). i stippled a popular stl myself and it came out looking like low poly oatmeal diarrhea until i printed it super fine, so im kind of unsure if i really want to test it beyond fitting the parts.
For the 92FS, a version with a standard front picatinny rail would be great. Robocop is a must, and don't forget the one from "Predators." If anyone can design a giant add-on for the front of the 92, I'm betting on you.
so i found the 92 on a file site but the link is bad. i went looking elswhere and have come to a dead end. where can i find geralds file drops? specifically the 92 but id like do see what else he has too. can u drop me a link booligan?
@Booligan Shooting Sports keep up the great work man. The Auto-9 will be great, another 92FS/M92 project you could do is the one from Leon with the compensator!
Finally, something else 3D Printable for the Beretta 92 platform. I know there’s a Mag Well available, but not much else, until now‼️ Thank you Booligan 👍
The Beretta 92/96 platform is puts a large amount of stress on the rails. It makes for the longest lasting handgun(92FS and later) according to military testing. But this makes steel rails necessary for successive mag dumps across thousands of rounds. A rail insert with carbon fiber nylon(or nicer engineering filaments) could make it similar in durability to the original. I wonder if the design will incorporate AVES rails that they will sell. That would be ideal in my opinion.
@@defaulttarms9561 I don't expect PLA+ to tolerate as much successive firing as a steel frame can. The filament needs to be extremely high temp and strong at those temps for the same performance. Pins through rails and super high temp filament is the only way for similar performance. Or the use of polymer cased ammunition could also be used. It could reduce the temperature to one third that of regular ammunition. The USA uses it in the next gen rifles currently being manufactured.
Great builds! I’m looking into printing but I have no idea where to start as far as what type of 3D printer I would need to get started. Any suggestions? Thanks!
I love your collection, very nice. So it's safe to say u know what ur doing now. I'm a beginner and just looking for the best everything so I can build and fire for fun. I love building and making so many thgs as hobbies. Anyway thanks for the vids
I like to go with the prefix of: L means longer slide, X means longer frame. So a 19X is what we know it as, a 19L is a 19 with a 17 slide, and what would be a 19XL is just a 17. So with this I guess you made a 26L
26L does fit the general name, the concern with that name being confusing people on what slide to buy. 26L sounds like you'd need 26 parts when it exclusively uses 19 parts aside from the mag. Maybe a G19S
The 26 grip is nice, because it's easier to conceal... and the longer barrel is nice, because it makes it more comfortable to carry IWB. The longer barrel reduces the feeling of the gun wanting to tip out of the person's belt when leaning forward. With smaller guns like the G26, P365, etc... and them having heavier grips, when a person leans forward at all, that weight makes it want to tip outward, which causes the muzzle do kinda dig into your lower abdomen there. A good belt can fix that, but even with a good belt, having a longer slide still makes it more comfortable and more stable. A lot of people that own a G43 or G43X actually carry them in G48 holsters, because it's more comfortable. I'm sure many people that carry a P365 do the same thing, carrying them in a P365xl holster.
where can I find the file for the Beretta? I looked everywhere. If anyone could please point me in the right direction id greatly appreciate it. thanks.
@@booliganshootingsports Thank you so much for letting me know! I wasn’t able to find any information on whether it had been released or not. I can finally put it to rest now, as I thought I just wasn’t able to find the file.
how about something simple to the beretta 92fs frame. how about adding a longer beaver tail to the frame like weskers cutsom samurai edge from the resident evil series
RUclips doesn’t allow videos like that and has removed several of mine which show more technical details on how to print objects. Read the newbie guide from CtrlPew. That’ll get you started.
I think 1926 is a good name lol, but that's just me! Awesome stuff as always, man! I'm definitely looking forward to progress on that Beretta. I love how those pistols look
I reshaped the grip to better fill my hand, the balance is really quite good with the short slide and midsize grip. I didn't understand the 19X when it first came out, and that's why I designed this in the first place really. But now I kinda understand the longer grip/shorter slide combos out there.
Would you be able to 3D print the Glock style gun with an EDC style thumb rest? I like the competition thumb rest and would like for someone to make one that it more low profile build into the frame with no edges that catch. Maybe even just the thumb rest that goes in using the front pin.
I've done some slightly exaggerated "accelerator" cuts in the frame on a few of my designs to serve as a bit of a thumb rest. I could flare one out a bit more.
The 3D scene needs a single/double action capable frame. The double action glock stuff is SO over done and old news in 3D, time for something new. I've been printing the Beretta 92fs frame the last few days (got it from print2a's site). It definitely needs improvements before it can fire rounds since it's plastic and not metal. But it looks cool as a desk ornament. No idea where to begin making improvements to it, even the model screws up cura unless you disable "Union Overlapping Volumes". Without disabling that, cura decides you dont need a trigger hole or a mag well anymore and just fills them completely solid lol. Hopefully the mods can be done without increasing the width as thats a decent pro I like about the 92, and it just looks cool. I cant wait to have a printable 92 frame, I love the single action capabilities of beretta 92 and 1911, so the beretta 92 is a perfect frame to start with.
If Print2A is hosting this same file, then they’ve taken and are distributing files that are in beta and not ready for public release. The file isn’t ready for release. I have no idea what file they’re hosting. Edit: just checked. They’re hosting a raw file, that thing isn’t optimized for printing at all. Sort of like how Defcad hosts random technical files that aren’t actually printable.
@@booliganshootingsports It's a file from 1-18-2021 from an unknown author as far as I can tell. It's not the first 92 frame I've seen in STL form but it's the first I've seen hosted on a mirror site like print2a. It could definitely fire rounds but doesnt look like it would survive past shot 1 lol. I did put all my 92 guts in it and it seems pretty functional, but I sure as shit wont shoot it. It's way to thin in many areas that would need reinforcement design changes.
As a Beretta fan I have so many questions about the 92 frame. I'd love to have a polymer framed 92FS. How is the locking block situated? I wouldn't think that polymer is strong enough to work with the locking block. Is PLA+ strong enough for the slide rails or did someone create metal frame rails? Please keep us updated on this project. I'd love to see how it turns out. If it's successful I'll have to buy a printer and start learning how to use it. Ever since I shot a polymer framed Hi Power in South Africa I've dreamed that I could have a Beretta 92 with a polymer frame.
Wondering the same thing five months later lol. I have a complete 92fs slide that I was given many years ago. I've just been sitting on it with no plans. Now I have plans😎
I get what you meant, a 26 slide on a 19 frame would be like a slightly smaller 19X - not a bad idea, it's just kind of already been done. Inversing the 19/26 idea also inverses the benefits, i.e. the 19/26 has a longer barrel for better velocities/accuracy etc. on a much more concealable frame accepting 26 mags. A 26/19 would just be worse ballistics on a much less concealable frame, you know?
@@fffiilpsnamecaps9004 I've done that as well with my G26X frame design. I'm just confused about what he's asking for, since he wants a 26 frame with a 19 slide and that's already exactly what this video is showing, lol.
Awesome I bought an ender 3v2 on your and a friend I know has ones recomendation. Haven't made any Gats but a few cool prints so far. Do you think that filament would hold up to something like an AR Lower?
Problem with that name is that it would people to think that they need G26 parts to build it, when it pretty much exclusively uses G19 parts, lol. So G19S might be better.
and whydo you guys keep making designs with no parts kits its a 1000 springfild kits on ever gun parts but no one designs a springfild thats dumb away next time you guy get a idear to design something check around to see if its parts so other people can make them too
Are you talking about XDs? There are several XD frame designs being worked on. I’ve shown one a few times. And Beretta kits are frequently available for dirt cheap, that’s why someone designed frames for them.
@@booliganshootingsports man i been lookig for a bobkat kit for mounths cant find one try finding a fn 40 kit or a mac11 parts kit and who makes the xds im not sure about them but like vin said you guy buy all the kits when the design is in beta then whe it drops its none for the avarage dude to graband just got it you want to know what design you made that i think is ulgy lol all of them everybody in the community knows booligan cant cad for shit but no one says anything cause your a nice guy and you did so much for the communiy and they rather kiss your ass cause your one of the four farthers of this 3d 2a thing but i got to tell you the truth i love what you do and have done but your design are weird af bro lol i hope that make you a better designer my friend
When designs are released, people frequently end up buying all the kits. There's nothing that we designers can do about people buying up kits and scalping them. That's why we generally don't release specifics about what kits are needed until things are formally released. We design frames for parts kits that are available, otherwise what would be the point for us to design them? Some kits, just by the fact that they're not in production anymore, are going to be limited in quantity. Nobody is making new police surplus FNS kits, for example. They sat on the market for YEARS for cheap until people designed frames for them. I'm sorry that you're slow on the draw to pick up kits when things are announced. The FNS kits disappeared for fair prices overnight after PSR did a video showing how cheap the builds can be. But you can still find them for a premium from unscrupulous sellers. Mac kits continue to be produced, you just have to pay attention to the manufacturers when they announce they're available. The XD frame designs are in the works both on DetDisp and AWCY. They'll be released when the designers decide to release them. Betas are generally open. Anyone can participate in them if they're involved in the community. It's weird how I can't CAD very well, yet so many other designs in the community are based off of my designs. And how many people that you are referencing right now got started designing things at all based on my work. Kinda weird in that way. You're definitely free to, you know, not print my designs. You may not like the aesthetics, but I do, and that's who I design for. Myself. The fact that thousands of other people like it as well and choose to print the work that I do for free for this community is a testament that maybe other people like the designs as well. Best of luck in the future. Maybe be less of a dick and maybe people will help you out, point you in the direction of betas, etc. As for me, I'll continue to design what I want for the kits that I want, because I don't do this for people like you :)
@@booliganshootingsports i couldnt see it any other way lol but next time you get a lil constructive critisisum the person giving it to you may just want to be honest withyou and care not to bullshit you or kiss your ass thoes are the real one you need to keep around they will chanlage you and make you better and you can truly trust as for me well iam a dick lol thanks for your time brother
@@booliganshootingsports bless your patience and fortitude for putting up with people like millions here...like holy shit I wouldn't have even responded but you got a gift I bet is actually a huge burden lol. Anybody talking shit about your designs can't hack it, I think you've got the sweetest fucking aesthetic of any designer and I truly mean that. The hours and hours and hours you take designing just for a hobby are fucking awesome, and the fact that you share them with NO monetary gain except to continue the hobby is legitimately inspiring. Keep it up, man, there's always going to be mouth-breathing punctuation-less trolls with shitty opinions out thhere taking advantage of the anonymity of the internet, absolutely can't let them keep you down, fuck that noise.
Dude you weren't lying. I can't wait for your auto9.
I built your 19/26 for my first build ever - came out BEAUTIFULLY btw - and called it the Hayek. You know - short, top-heavy, badass? No? I'll show myself out.
After Simo Hayek, the white death? If so I hope you printed it in white
@@thateffinguy2422 is The White Death a 5'2" busty mexican-american A-list actress?
and I DID print it in a light gray sooooooo not too far off i guess
Oh sweet Salma
@@booliganshootingsports call the Glock design the "Underbite"
@@XROSSDABOSSX 😂
I still can't get over how perfect your prints look.
They look good idk man mine look similar on my cheap ender clone and all I did was level it and put the mm height super low tuning and long print times are how it's done 3 days for a ar lower but the sides were completely smooth like it wasn't even printed
@@popinmo ive been weary about printing at low layer heights. ive never “tested” my prints (yet) so im essentially bullshitting you right now, but from what i understand you get better strength with taller layers (sacrificing detail of course, which is more noticeable on stippled/engraved style designs and maybe a problem for frames with intricate internal design). i stippled a popular stl myself and it came out looking like low poly oatmeal diarrhea until i printed it super fine, so im kind of unsure if i really want to test it beyond fitting the parts.
For the 92FS, a version with a standard front picatinny rail would be great. Robocop is a must, and don't forget the one from "Predators." If anyone can design a giant add-on for the front of the 92, I'm betting on you.
so i found the 92 on a file site but the link is bad. i went looking elswhere and have come to a dead end. where can i find geralds file drops? specifically the 92 but id like do see what else he has too. can u drop me a link booligan?
@Booligan Shooting Sports keep up the great work man. The Auto-9 will be great, another 92FS/M92 project you could do is the one from Leon with the compensator!
how can i get the files?
I like the 1926. It's like the P320 upper/P365 lower grip module from Amend2.
Love the designs and after I move going to finish the NAO!
Very nice can't wait for the auto 9 release I was thinking of making 1 also been studying my auto 9 gas blow back airsoft 😄
Did you use anything to smoothen the pla filament. If yes what is it ?
I would like to see a micro robocop Beretta using the 84 or 85FS someday
Finally, something else 3D Printable for the Beretta 92 platform. I know there’s a Mag Well available, but not much else, until now‼️ Thank you Booligan 👍
Call it "Glock Block" v (number model here)
Glock Block man. Its short sweet and catchy as hell.
Glocks already ARE blocks, man, from the grip to the slide they're just so square
I love your builds there all so unique and interesting
I need to get better at cad. Wanna put a 17L slide on a 26 grip for fun
Do Wesker’s Samurai Edge frame from ‘Resident Evil’. It’s a very unique frame that I think you might like.
Yes please!
Can you make a Beretta 92x subcompact? Similar to the CZ 2075 rami
Is there anyway I can download the file for two of these pistols
The Beretta 92/96 platform is puts a large amount of stress on the rails. It makes for the longest lasting handgun(92FS and later) according to military testing. But this makes steel rails necessary for successive mag dumps across thousands of rounds. A rail insert with carbon fiber nylon(or nicer engineering filaments) could make it similar in durability to the original. I wonder if the design will incorporate AVES rails that they will sell. That would be ideal in my opinion.
I wouldn't be surprised if AVES wasn't currently working on a Beretta rail system
youd be surprised how many rounds the beta testers have on the current rail setup.....its wild. i could hit a thousand in a month or so
@@defaulttarms9561 I don't expect PLA+ to tolerate as much successive firing as a steel frame can. The filament needs to be extremely high temp and strong at those temps for the same performance. Pins through rails and super high temp filament is the only way for similar performance. Or the use of polymer cased ammunition could also be used. It could reduce the temperature to one third that of regular ammunition. The USA uses it in the next gen rifles currently being manufactured.
The vast majority of 92 series frames are made of aluminum, Not steel.
Oh man! I love your videos!!!
nice job on tha 1926 looking like a "shmedium glock"😂 👏👌🔥💯🤙"glock shmedium 1926" or booligans glock shmedium 🤷
It's the Glock "Shrinkage" model
@@booliganshootingsports 🤣🤣🤣 perfect 👌
Call it Shorty Big Head
that M92 has me right on the edge
on the *Samurai Edge?*
@@Racc_Oon the bust a walnut edge
Great builds! I’m looking into printing but I have no idea where to start as far as what type of 3D printer I would need to get started. Any suggestions? Thanks!
Read the guide from CtrlPew.
Got a name….The NOOB Never Out Of Battery
That's not bad!
@@booliganshootingsports it better than bad…😂
Anything worth mentioning on the 92 frame yet? Really want to make a 22lr version to fit my 9mm version.
why don't you call it the kleiner? (klein/e means small in german)
I love your collection, very nice. So it's safe to say u know what ur doing now. I'm a beginner and just looking for the best everything so I can build and fire for fun. I love building and making so many thgs as hobbies. Anyway thanks for the vids
I'm thinking the cyber glock 1926
2026 or 2022 to be year specific
I should learn CAD just to do a Resident Evil Samurai Edge mod for the Beretta 92 beta
I like to go with the prefix of: L means longer slide, X means longer frame. So a 19X is what we know it as, a 19L is a 19 with a 17 slide, and what would be a 19XL is just a 17. So with this I guess you made a 26L
26L does fit the general name, the concern with that name being confusing people on what slide to buy. 26L sounds like you'd need 26 parts when it exclusively uses 19 parts aside from the mag.
Maybe a G19S
The hammer toe
Need a CSGO Glock frame-a 26 grip on a 17 frame
Do a Wesker Samurai Edge build!
How's the Beretta coming along?
I would love to see a PX4 print.
The 26 grip is nice, because it's easier to conceal... and the longer barrel is nice, because it makes it more comfortable to carry IWB. The longer barrel reduces the feeling of the gun wanting to tip out of the person's belt when leaning forward. With smaller guns like the G26, P365, etc... and them having heavier grips, when a person leans forward at all, that weight makes it want to tip outward, which causes the muzzle do kinda dig into your lower abdomen there. A good belt can fix that, but even with a good belt, having a longer slide still makes it more comfortable and more stable. A lot of people that own a G43 or G43X actually carry them in G48 holsters, because it's more comfortable. I'm sure many people that carry a P365 do the same thing, carrying them in a P365xl holster.
but that m92 is fire im on that please dont make it look cool lol
where can I find the file for the Beretta? I looked everywhere. If anyone could please point me in the right direction id greatly appreciate it. thanks.
The designer never released it as far as I know.
@@booliganshootingsports Thank you so much for letting me know! I wasn’t able to find any information on whether it had been released or not. I can finally put it to rest now, as I thought I just wasn’t able to find the file.
I cant wait to mess with the beretta files. for... reasons.
Why you want a 19 with a 26 frame ?To conceal carry and the 19/26 sounds original not bad
how about something simple to the beretta 92fs frame. how about adding a longer beaver tail to the frame like weskers cutsom samurai edge from the resident evil series
WTB 2 standoff devices plz
Do you only print out the receiver? Or do you 3D print the WHOLE gun ?
Legally, the receiver is the gun. Everything else is readily available spare parts.
I have a m9 parts kit ...can I haz files
Can anyone design a sight for a beretta 92s
do you have any video showing exactly how to use the machine to make these firearms?
RUclips doesn’t allow videos like that and has removed several of mine which show more technical details on how to print objects.
Read the newbie guide from CtrlPew. That’ll get you started.
@@booliganshootingsports thank you 😊
Call it a "giga 6"
We gonna need a 92 with Revi's sword cutlass engravings and the scull and cross bones on the grips from Black Lagoon too
You should name it the pocket rocket
BSM19!!! Booligan Short Mag 19
Can someone make a Glock 30 frame
Any updates on the beretta?
I think 1926 is a good name lol, but that's just me! Awesome stuff as always, man! I'm definitely looking forward to progress on that Beretta. I love how those pistols look
whats the weight on that m92?
This is what the g19x should have been
I also have a G26X testing out currently with a G26 length slide and 19 length grip, and I like it WAY more than I thought I would, lol.
@@booliganshootingsports why do you like it?
I reshaped the grip to better fill my hand, the balance is really quite good with the short slide and midsize grip. I didn't understand the 19X when it first came out, and that's why I designed this in the first place really. But now I kinda understand the longer grip/shorter slide combos out there.
You should call it a Glock 16
Comment
living up to your name, i like it
How can I get the files for this
I call it a g26 long slide
I would like to see a stl in the Mac-11 below the vz-61
You and everyone else haha. Once I can digitally replicate the physical changes I made to parts, it’ll get out there.
Would you be able to 3D print the Glock style gun with an EDC style thumb rest? I like the competition thumb rest and would like for someone to make one that it more low profile build into the frame with no edges that catch. Maybe even just the thumb rest that goes in using the front pin.
I've done some slightly exaggerated "accelerator" cuts in the frame on a few of my designs to serve as a bit of a thumb rest. I could flare one out a bit more.
Can you use taurus parts kits?
Call it the glock 96
Glock 26ls
So I'm confused because the so many models of the 92 but what's compatible with this frame?
That full list will be provided at release.
Please make some 92 series prints, I'd love to make my Brigadier look even cooler
I just love this it follows Cyberpunk Rule of Cool
File for baretta?
The 3D scene needs a single/double action capable frame. The double action glock stuff is SO over done and old news in 3D, time for something new. I've been printing the Beretta 92fs frame the last few days (got it from print2a's site). It definitely needs improvements before it can fire rounds since it's plastic and not metal. But it looks cool as a desk ornament. No idea where to begin making improvements to it, even the model screws up cura unless you disable "Union Overlapping Volumes". Without disabling that, cura decides you dont need a trigger hole or a mag well anymore and just fills them completely solid lol. Hopefully the mods can be done without increasing the width as thats a decent pro I like about the 92, and it just looks cool. I cant wait to have a printable 92 frame, I love the single action capabilities of beretta 92 and 1911, so the beretta 92 is a perfect frame to start with.
If Print2A is hosting this same file, then they’ve taken and are distributing files that are in beta and not ready for public release. The file isn’t ready for release. I have no idea what file they’re hosting.
Edit: just checked. They’re hosting a raw file, that thing isn’t optimized for printing at all. Sort of like how Defcad hosts random technical files that aren’t actually printable.
@@booliganshootingsports It's a file from 1-18-2021 from an unknown author as far as I can tell. It's not the first 92 frame I've seen in STL form but it's the first I've seen hosted on a mirror site like print2a. It could definitely fire rounds but doesnt look like it would survive past shot 1 lol. I did put all my 92 guts in it and it seems pretty functional, but I sure as shit wont shoot it. It's way to thin in many areas that would need reinforcement design changes.
Glock 19x!
Finally a glock that, I think, looks as sexy as a P229.
Name? GH9 Glock Hybrid 9
Call it the 26x
The 19s
G19xs
26 xl
Do you have an Odysee channel?
That’s where all of my public files are hosted.
How about the 26 long slide?
As a Beretta fan I have so many questions about the 92 frame. I'd love to have a polymer framed 92FS. How is the locking block situated? I wouldn't think that polymer is strong enough to work with the locking block. Is PLA+ strong enough for the slide rails or did someone create metal frame rails? Please keep us updated on this project. I'd love to see how it turns out. If it's successful I'll have to buy a printer and start learning how to use it. Ever since I shot a polymer framed Hi Power in South Africa I've dreamed that I could have a Beretta 92 with a polymer frame.
Wondering the same thing five months later lol. I have a complete 92fs slide that I was given many years ago. I've just been sitting on it with no plans. Now I have plans😎
where did you get STL?
Which one?
G19/26 should be named the black hawk 26
That's good
Can we get a Jetfire print?
G96
Any chance of an inverse of the 19/26? So a 26 frame with a 19 slide.
That’s exactly what this is, lol. 26 frame, 19 slide.
I get what you meant, a 26 slide on a 19 frame would be like a slightly smaller 19X - not a bad idea, it's just kind of already been done. Inversing the 19/26 idea also inverses the benefits, i.e. the 19/26 has a longer barrel for better velocities/accuracy etc. on a much more concealable frame accepting 26 mags. A 26/19 would just be worse ballistics on a much less concealable frame, you know?
@@fffiilpsnamecaps9004 I've done that as well with my G26X frame design. I'm just confused about what he's asking for, since he wants a 26 frame with a 19 slide and that's already exactly what this video is showing, lol.
Just call it the g96 haha
More revolvers please! Love to see you do something to a snub nose!
I did custom grips for a charter arms Mag Pug a few years ago.
Apologies if I’ve already asked this, but what printer/filament do you trust to do your prints on firing models?
I do almost all of my printing on an Ender 3 V2, and my current preferred filament is Duramic PLA+
Awesome I bought an ender 3v2 on your and a friend I know has ones recomendation. Haven't made any Gats but a few cool prints so far.
Do you think that filament would hold up to something like an AR Lower?
@@darthsquidious215 we have people printing AR lowers everyday out of that filament 👍
I think modeling one of the Berettas after Leon’s in “The Professional” would be fun too.
You mean a normal Beretta 92?
@@the_ure The Beretta Leon used. With the compensator.
Awesome as always
Thanks! I'm just glad other people like some of my silly designs.
@@booliganshootingsports np, I love different things and these projects you make as awesome.
Glock 19. Glock 26.
Glock 69. ✔
The problem is, the Glock 69 already is a design out there lol.
Glock 26L
Problem with that name is that it would people to think that they need G26 parts to build it, when it pretty much exclusively uses G19 parts, lol. So G19S might be better.
@@booliganshootingsports🤔 yes, I agree completely! See.... that's why you have an awesome youtube channel and I'm just a lowly commentor
@@booliganshootingsports Or perhaps the G19K? Since all the suppressor companies are making 'K' cans, the word kurtz is very en vogue now lol
and whydo you guys keep making designs with no parts kits its a 1000 springfild kits on ever gun parts but no one designs a springfild thats dumb away next time you guy get a idear to design something check around to see if its parts so other people can make them too
Are you talking about XDs? There are several XD frame designs being worked on. I’ve shown one a few times.
And Beretta kits are frequently available for dirt cheap, that’s why someone designed frames for them.
@@booliganshootingsports man i been lookig for a bobkat kit for mounths cant find one try finding a fn 40 kit or a mac11 parts kit and who makes the xds im not sure about them but like vin said you guy buy all the kits when the design is in beta then whe it drops its none for the avarage dude to graband just got it you want to know what design you made that i think is ulgy lol all of them everybody in the community knows booligan cant cad for shit but no one says anything cause your a nice guy and you did so much for the communiy and they rather kiss your ass cause your one of the four farthers of this 3d 2a thing but i got to tell you the truth i love what you do and have done but your design are weird af bro lol i hope that make you a better designer my friend
When designs are released, people frequently end up buying all the kits. There's nothing that we designers can do about people buying up kits and scalping them. That's why we generally don't release specifics about what kits are needed until things are formally released. We design frames for parts kits that are available, otherwise what would be the point for us to design them? Some kits, just by the fact that they're not in production anymore, are going to be limited in quantity. Nobody is making new police surplus FNS kits, for example. They sat on the market for YEARS for cheap until people designed frames for them.
I'm sorry that you're slow on the draw to pick up kits when things are announced. The FNS kits disappeared for fair prices overnight after PSR did a video showing how cheap the builds can be. But you can still find them for a premium from unscrupulous sellers. Mac kits continue to be produced, you just have to pay attention to the manufacturers when they announce they're available. The XD frame designs are in the works both on DetDisp and AWCY. They'll be released when the designers decide to release them.
Betas are generally open. Anyone can participate in them if they're involved in the community.
It's weird how I can't CAD very well, yet so many other designs in the community are based off of my designs. And how many people that you are referencing right now got started designing things at all based on my work. Kinda weird in that way. You're definitely free to, you know, not print my designs. You may not like the aesthetics, but I do, and that's who I design for. Myself. The fact that thousands of other people like it as well and choose to print the work that I do for free for this community is a testament that maybe other people like the designs as well.
Best of luck in the future. Maybe be less of a dick and maybe people will help you out, point you in the direction of betas, etc. As for me, I'll continue to design what I want for the kits that I want, because I don't do this for people like you :)
@@booliganshootingsports i couldnt see it any other way lol but next time you get a lil constructive critisisum the person giving it to you may just want to be honest withyou and care not to bullshit you or kiss your ass thoes are the real one you need to keep around they will chanlage you and make you better and you can truly trust as for me well iam a dick lol thanks for your time brother
@@booliganshootingsports bless your patience and fortitude for putting up with people like millions here...like holy shit I wouldn't have even responded but you got a gift I bet is actually a huge burden lol. Anybody talking shit about your designs can't hack it, I think you've got the sweetest fucking aesthetic of any designer and I truly mean that. The hours and hours and hours you take designing just for a hobby are fucking awesome, and the fact that you share them with NO monetary gain except to continue the hobby is legitimately inspiring. Keep it up, man, there's always going to be mouth-breathing punctuation-less trolls with shitty opinions out thhere taking advantage of the anonymity of the internet, absolutely can't let them keep you down, fuck that noise.
Dan Wesson likes to make 1911s with commander slides on officer frames.
And just like that JSD SUPPLY bought up all the parts kits and are charging 4x the price
Maybe not yet but give them a couple hours
KM Tactical has served me very well but I find it hilarious their "G26 upper parts kit" is $30 more than a 19 kit...😂
Do a 17/26 and rip off the Detonics Streetmaster
Where u print these
Where do I print them? At home, on my 3D printers, lol
@@booliganshootingsports lol i mean the website
For the files? I design most of my prints myself. All of my completed files are released on Booligancustomgunworks. Otherwise check out The Gatalog.