Paper Beretta 92 Full assembly
HTML-код
- Опубликовано: 4 фев 2025
- Long and boring video of me strugling to assemble this masterpeace of engineering
Templates link
drive.google.c...
Important note. My templates are not for beginners. To use it you need to be an experienced paper crafter or to put some serious effort in it. There is no PDF file or instructions. If you don't know how to download and open this file and what to do with it, then it is just not for you. No offense.
I have an actual beretta 92fs and the level of detail is incredible. I had no idea something like this could be done. The literally only difference i could notice is that you don't use roll pins and there are no beretta insignias or markings otherwise its an exact replica. I personally think beretta should have this in their gun collection to be stored for the foreseeable future as a museum piece. But ofcourse you spent a long time making it so you should get to decide what happens to it.
Does that mean that this gun can fire?
@@EnclavegovtofficialUSA It could if the components were made of metal but since they are made of paper they can't.
Its 3d printed. They're saying paper so they don't get in trouble with RUclips or the law. This is a ghost gun
@@kikacruz4560😂 no it's not a "ghost gun" and please out of respect for common sense and intelligence never use that ridiculous propaganda phrase "ghost gun" again
@@noncompliant209caliit’s definitely not paper though. When he loads the spring into the mag, it defo sounds like plastic and not “paper”.
Великолепное качество. Ваши работы по сей день непревзойдённые образцы высочайщей тезники. Браво.
I've been waited for 2 years and this masterpiece is really worth for it
My veteran grandfather said : if this guy are life in my generation. Countries will search for him.
He was shock dude, his expression tell everything. He said u re insane. And goverment must have people like u.
I tell it was made with just hand and he said.
Okay his not human ❤❤
I can tell he loves his m1911s haha
bro turned paper back to wood
he turned paper back into wood
FR 😭🙏
Probably resin
@@bev8200sanding, gluing paper together makes that (gun in video)
Вот у него запчастей как у Космического корабля, неее дайте мне Наган Револьвер не зря же говорят, ,,Простота сестра таланта,,
My brain cells actually died knowing that this is somehow made of paper... I thought it was plastic/wood. This is truly remarkable
Are you joking? This is very obviously not paper. I’m pretty sure he just said that to get past RUclips guidelines when he put it on the table, it sounds like metal because it is a real Beretta like what
@@owen6033
You're wrong: this is indeed paper.
the effort of detailing the gun model is so crazy good.
It looks too realistic... The creator seems to have golden hands.
Indistinguishable from the genuine article. It's amazing.
People that print and make there own parts and also paper thats a good craft especially when you made it and feels pretty good to
Very detailed really surprising, this gun has a lot of difficult little details but you still succeed.
Your building process. Are you using super glue for everything? Also, do you let templates dry before stacking and gluing? Would love it if you can give an answer :)
I'm using superglue to soak surfaces of parts.
It is important that hardened paper was completely dry before gluing, otherwise finished piece can bent
@@gotobad7736 Great, I thought so cause it sounds like it's really tough. Is super glue the only glue you use? It would be awesome if you had videos of your building process. I'm getting back into creating but I want the results you have but don't know how to do it good like you
@@TPhillDevit is multiple layers of paper and glue makes material tough, not surface cover of super glue. I use PVA or Elmers glue to connect those layers of paper
How thick those layer of papers are? Did you use other material such as paperclip (like Tacome42 did) to strengthen the paper?@@gotobad7736
Спасибо большое за предоставление материалов.
guys it is paper look at other vids featuring the same gun but its still not painted and hes been making sines 1year ago
Very nice paper model. This is very impressive.
How is this paper? Do not hear the magazine the springs the screws the firing pin when he put it on the table it sounds like metal because it is. This is not paper. He just said that to get past RUclips guides.
@@owen6033 you need education
I wanted to ask a question. These pins don't fall off, do they?
Man is going to catch a felony for his "paper machet“ project
It is lawful to make your own firearms in America.
This is so crazy accurate, props bro!
What did you use to paint this? I've seen some people create a treated steel look with graphite powder and clear coat. Is this something similar?
it is usual Tamiya paints, black and gunmetal
@@gotobad7736 Thanks!!
how do you made the grip texture? its awesome.
Твои проекты потрясающие, брат, вернись.
Es un genio para armar ese fierro eso es algo qe no lo hase cual qiera mucha avilida y saber un genio mis respetos
Круто покрашено, выглядит прямо как металл, насколько могу судить по видео
Are the springs actually sourced OEM? If not, what did you use in practuce for this model?
Collect some springs here and there and pick suitable for purpose. Magazine spring is selfmade from steel rope
@@gotobad7736 alr thanks man
@gotobad7736 Sorry to ask once more, but are the springs source from pens? I wish to do this project for myself as well
@@seanchristian572 springs are not from pens
@@gotobad7736
Oh alr
Я удивлен тому что у вас получается создавать такие замечательные модели знаменитых пистолетов, особенно зная, что в Украине запрещены пистолеты 😅
Hey there, I have this model in airsoft version. I can’t put back that small spring 16:23
It also looks a bit different. Do you know how to put it back …? Thanks a million
why is it shining like real metal?
If you guys look at the file in the description, it has .3dm at the end of it, which means its a 3d model. These files are typically used with slicers for 3d printers. For those of you saying its paper. Look at the magazine and the stippling on the grip. The magazine is so thin, and not to mention the odd angles (the triangle indent) would be impossible to replicate. The stippling would only be possible with paper if you made the entire grip plate then machined out the grooves. Use common sense please people.
Edit: Its most likely Resin printed because of how thin the magazine is and the finish. (It could also very well be 3d printed with some sanding and finishing coat on it, this is unlikely thought because if you look in all the hard to reach places, there's no lines, so either they put lots of work into it or its resin printed.)
Доброго вечора. Чи є у вас фали Beretta 92 у форматі STL або STEP?
Доброго. Я використовую власні 2д креслення. 3д моделі люди витягують із World of guns
Можете поділитися кресленнями?
Will there be a video showing the firing and ejection of bullets? I saw in your previous videos you shown the ejection mechanism but you haven't shown it with the paint. Aso great job on the gun.
my previous video was showing all working mechanics with paint
@@gotobad7736 My bad didn't see that one. I will be on the lookout for any new videos cause this is amazing.
What materials did you use to make this ?. And if it's paper how did you make this mesh and did you glue it?. Or did you 3d printed this?
out of paper, check his channel for previous videos
@@mike_gread why is it so solid when he place it down?
@@janetdaguro2307 Because you put in some resin (probably) to harden it. Or loads of glue. But in the end it's just dried out paper shaped and painted. That's some f*ing impressive work, got to admit. Hope it helps :)
@@mike_gread ok im making a 1911 so thank for the suggestion
Гарна робота! Чому не скористався готовою викруткою, а використовував саморобну? Там є якийсь секрет?
Металева викрутка пошкодить паперові гвинти, тому зробив із пластикової карти
Very good assembly of the parts.
Yo my mate which one ya makeing next.. these are actually really good especially tye fact there made with paper 😂😂 ( keep up the good work mate)
Asking for desert eagle drawings。Why are
the cloud disks all empty folders?
I downloaded the file and I tried to open it on pepakura but it gives me an error saying that the file format is not supported. What do I do?
on his past videos, he used something called rhinoceros 3d? maybe try opening it there
How do you get into the posesion of the blueprints?
Description, now mind you this took a whopping 3 years for this guy to make. And he is VERY skilled so good luck even finishing it within a decade
Как ты смог сделать такую поверхность на боковых хватах? Даже предположить не могу...
Could you make a long gun? e.g. a submachine gun or an AR15 rifle. that would be amazing your works are perfect
it takes me 2-3 years to make a pistol. I think the amount of time to produce rifle will be at least 5 years. It is too long for me right now
@@gotobad7736
Can you try making a Glock 17 next?
Also is most of the time just building or other elements?
Brother, what kind of paints did you use?
Tamiya black flat gloss and semi gloss lacquer paints
What software should I use to open the file?
Вітаю із завершенням моделі, земляче!
Довго вже спостерігаю за твоєю творчістю. Такі моделі - взірець охайності, моя повага.
Не підкажеш, або взагалі на відео зняти, процес фарбування. А ще точніще - захисту фарби. Багато рухливих частин, і лак з фарбою витирається, не підкажеш як це побороти хоч трохи?
А за відео ще раз дякую
Фарбу не захищаю. Очевидно, що макет із паперу всеодно не володіє такою міцністю, щоб довгостроково витримувати механічні навантаження. Якщо уважно подивитись на фото реальної зброї, то вона завжди має різного роду сколи і потертості, тому я спокійно відношусь і до пошкодження фарбового покриття своїх моделей, від цього вони тільки виглядають більш реалістично.
Що до самої покраски, то тут нема ніяких хитрощів, можна красити хоч аерозольними фарбами з Епіцентру.
З самого початку цей канал був лиш доповненням до моїх ворклогів на only paper, там я детально описував процес, а відео знімав лиш для демонстрації рухливих частин
@@gotobad7736спасибо брат за этот замечательный проект
这是我见过最好的手工
What I need is list of the springs needed and how many of each if possible
How do you avoid hard paper shrinkage?
Paper covered with superglue is like plastic, its stable enough
@gotobad7736 what I meant is during the hard paper making stage. You know when you make your hard paper pieces, and then glue the schematic print outs over it, the paper naturally shrinks. That's what I'm referring to, and how many layers do you make ur hard paper with, before using super glue
@@pxgstudios when multiple layers of paper are glued together and completely dry it doesent shrink when you aply template on it. Im using superglue only on surfaces of finished shape
@@gotobad7736 okay. Do you glue the templates over the hard paper? Or draw
@@pxgstudios templates over hard paper
I can't open the file how can i fix this issue
American school kid fav project
Это шедевр сложности!
are u seriuos that all are paper? the sound like a metal
Yeah you can watch the progress of this model though out the years. Its really cool.
how did you make paper that solid
can you share for me part per part to bilt a part, i want to make to beretta
How is this paper? It looks and sounds clacky like some kind of resin or wood.
Paper sealed and pressed with epoxy resin. Still paper and amazing job.
@@SeRgU123 Ah, I see. That's pretty cool.
How much does this gun cost? Can I buy it?
how did you prevent the paper from yellowing?
my glock looks dirty after a few days.
Clean hands)
Wait is the mag paper?
Do you have your permit to build?
чем вы пропитываете модели?
can u please make a tutorial on how to make the paper like this, harden, i know its made using glue, but can u show a small tutorial or something, i cant find any vid or tutorial on that anywhere
ruclips.net/video/AiORAVsKoEs/видео.html&ab_channel=PaperArcher
It's looks so real lmao. I hope people get this
hey, could someone step me through how to download the files so I can make it please
How it can be?😮 ❤ Love that beretta all my life
It's so close to the real thing that if you replaced the hammer and firing pin with real ones I wonder if it could actually shoot (only once obviously)
It can shoot but my hobby is to make precise copy. If i wanted to shoot i make it out of metal
Is the numbers in mm?
Подумываю сделать модели из бумаги, что посоветуете? Начну с простого: жеребенка питона.
Reminds me of that Ernest Goes To jail movie from the 80s where he carved a super realistic bar of soapgun
What kind of paper?
Can i purchase that one
do you electro plate your paper?
No. It is Tamiya paints
Templates are not working file are not opening
can you please make a paper mauser c96 and then few weeks after make a paper mauser c96 full assembly just like your paper destert eagle your paper 1911 and your paper beretta 92
what kinda paper is this
This is my number 1 favorite
How did this guy make the paper look and feel solid 😭 pls tell me😭😭
Was this all done with paper? Sorry, I can't believe it.
Watch my previos unpainted videos. Its all paper except springs and some pins
Hello, how are you Goto Bad, I want to ask you to see if you can make another video making the same gun but explaining how to make the pieces step by step, please, I want to make one and I don't know how to see if you can help me, please.
im not inventor of this technology, there are plenty of videos on yoututbe showing step by step procedure. My chanel is about qulaity which you dont find anywhere else
@@gotobad7736 Thank you very much, by chance you don't know where I can find those videos, please, or if you have the link, could you please send it to me?
@@OtakuLuffy261 ruclips.net/video/8gT5ec2bxHg/видео.html
@@gotobad7736 Thank you very much, hope it goes well, thank you for the link, have a good night, goodbye.
Loved it❤
This CANT be paper, how did you get it so strong did you laminate 300+ sheets of paper, and carve them?????? I NEED FREEKING ANSWERES>
I watched the whole thing at normal speed and I was riveted the entire time. Or should I say I was tiny dowel rodded.
Essa mola do ferrolho está muito estranha?
Waiting for Glock :)
will you please show us the star model B THANK YOU , I AM FROM EGYPT.
Please teach me to get strong paper
google hardened paper
Thank you
No hay aceite en las partes móviles.
25 лет назад, именно в таком виде, в полиэтиленовом пакете, мне этот пистолет принесли.
Его утопили в луже, разобрали полностью, чтобы просушить, собрать не смогли.
Я тогда впервые такой образец увидел. Информации никакой не было. Собирал методом подбора детали по месту.
Собрал.
Поразило обилие пружин.
Пришёл к выводу, что себе такую игрушку ни при каких обстоятельствах не возьму.
Ненадежно.
wait this is PAPER?
Ти геній!
What is your way to do this ? My super glue paper are not so g0od like this is xtremely smoth is the best quality it can be - you just done this normaly and used sand paper or you have a special glue or special paper
東京マルイのM92F(BB弾用モデルガン)持ってたけど本物がこんなに複雑とは思わなかった
バレルをスライドに組み込むところからはモデルガンも同じだなーと思った。
自分も何年か前にこれと同じモデルのマルシン製のM92Fのモデルガンを組み立てましたが全く同じ方法で組み立てましたよ
只、１つ違う所はバレルの中にデトネーターと言う部品を入れて組み立てるのが違う所ですね
実銃とは違うのでモデルガンは音などを楽しむオモチャの銃ですけどね
なのでBB弾を発射する事も出来ないですよ
Made it look so easy
This is not paper, this is...ahmm i think metal i cant accept this is paper
Can you make the Glock 17 Gen 4 please 😊?
i just wonder how the paper is so solid
He hot glued each layer together, then sanded off the excess.
How to open files, sorry i don't know...
When will you sell this?
For me its priceless. Nobody wants to buy paper gun that costs more than real one
Скажите пожалуйста, у вас есть какие-то соцсети, хотел несколько вопросов задать
Тут можно
@@gotobad7736 скажите пожалуйста, вы модель (запчасть), пропитываете цианокрилатом когда она полностью готова, или каждый слой, а потом эти слои склеиваете между собой?
@@GUS-bn1lg сначала склеиваю, пропитываю уже собранную деталь
@@gotobad7736 понял, а у вас было такое, что при пропитке детали, ее выгибало дугой? Дело в том что делал затвор и при склеивании была небольшая дуга, после пропитки стало прям хуже
@@GUS-bn1lg у меня такого не бывает, потому, что выкройки я делаю сам, продумывая заранее возможные проблемы. Если я и делаю длинный поперечный бутерброд, то всегда добавляю опорные поверхности для сохранения правильной геометрии
thats insane. i love it
big gun next?
how is that paper???
Multiple layers attached with hot glue, at least 30 for the bigger pieces, then sanded so it looks like one piece
@@EnclavegovtofficialUSA You sure? Hot glue is terrible for keeping multiple layers of paper together from my experience. I don't know how you do it so it looks like this but I would love to know.
@@diarrhea6344 Super glue, not hot glue.
Can you make more
You can do the same, with thin sheets of steel, induction welded. 😉