Hi Martin. Even with those sideways filters, I've found that filling them just enough to absorb the oil and saturate the internal filter element will still give the filter a headstart but not run out of the filter when you install. Actually, even a 1/4 or 1/3 filled won't run out if you're quick.
My uncle used to work at a Vauxhall Dealership. He said if the Z18XE burns more than a litre of oil between 10-12k intervals it had a hard beginning to life, probably an ex rental.
Whilst you're there, clean the leaves, check the condition of the belts, check any rubber hoses for cracking, check coolant levels, PAS fluid, washer fluid, battery terminals, etc. Pretty much whilst waiting for the engine to drain.
Yes but this video is for changing the oil and filter so when people search RUclips for info on filter and oil change on the Vectra, that's what they get.
as the oil filter seal comes off the filter now days i would put oil on both sides as they can leak when you only do one side it happend to my self but good vid for some beginner to have a go
great video martin, its good to watch and handy for the little tips you give, good to you got Sharon in on it too hehe. its a thumbs up from me and I look forward to the next video
Good Video my vans burning oil on start up but I’m not going to rip the top of the engine just to fit a few new valve stem seals if it burns oil heavily when driving then all do it then
Martin, have you ever considered getting OP COM/VAUX COM. It is handy for diagnostics and clearing fault codes. You can even program stuff like keys. I got mine on eBay for £20. I wish I'd bought it when I had the Astra G (Mk 4). I can use it on both the Vectra and the Corsa.
Good instructional video Martin. But, how many people change their own oil? Or, if they change oil at all. Sometimes we get coupons in the mail for 20% off an oil change at a local garage. If you build up some work with a local, if a big repair comes up and you're a regular customer, they go easy on the bills. But I know you make these videos to show people it's not hard to do yourself.
Nice tips Martin .. We have all done the can mess lol. Think i have a candidate for the worst mower ever it is not a total turd but has a 2 stroke motor with the ratchet start like the one Peter Anderson has not set points for years if , I can remember . Cheers Pete.
This'll give you a grin. Think you know I've had my Clio for 18 years now. Book says 10,000 miles but for a few years I did it at 6000, filter every 2. Time before last I filled with a half full 5ltr can. Before I've always just put 5ltrs in. Well I couldn't see the clean oil on the mark, put miles too much in so had to drain some lol. Year last September they only had synthetic so put that in. Only did about 5000 miles so left it this year. Better oil, so better to leave it.
Couple of thousand won't hurt. It's when they've done 60,000 plus and the sludge bungs the inlet filter that you have a problem. Quite a few years ago, one came into the garage that the sump plug was rusted in.....never had an oil change since the first service it had when new.
Brilliant video Martin! excellent engines the 1.8's, bought a Vauxhall insignia 2 years ago couldn't bear to let my vectra go so I kept it and is getting used more than the insignia and with the amount of miles I do for work its nearly at 200K. oil changes every 5000 miles, best think you can do I believe!
In my opinion is better car than insignia, I had 4 vectras,yesterday bought 2008 1.8 Insignia is nice,prety,but that comfort you dont really get! Is exactly the same engine I think on insignia and vecra c last model...some small bites are different,both of them having problems with overheating,I dont know why...
This story is so funny my brother who is not as mechanical person changed his oil forget to put the drain plug back when filled up he face was so funny
Good video and I appreciate you taking the time but just done a qashqai at ATS for £35 inc filter (with on line £5 voucher). There is nearly always a engine splash plate so it would take at least an hour. Is it worth it ?
Martin, I've done a service on a 2004 Vectra 1.8 petrol which has pretty much the same engine. (Z18XE)ruclips.net/video/8lw6F4kyTaE/видео.html You shouldn't just rely on the trolley jack. Axle stands or wheel ramps are safer. NEVER use tools to tighten the oil filter. ALWAYS do it by hand. Other than that you're spot on with your oil and filter change.
I know all about Jacking cars up and using Axle stands but I just took the jack up about 3 inches off the springs so It was not an issue. If you see, I didn't actually lay under the car, it was just to get a bowl in easier. Some people can't grab an oil filter so the plastic spanner wrenches are a safe bet in these situations as you can't apply too much force to them or they will break. Thank you for your concern though.
I find do the filter up by hand and then nip it up with the tool, not enough that you damage the paint on the replacement filter. Doing it up by hand only is an engine fire waiting to happen. Seen far to many cars where the filter works loose. Infact there is probably an adapter and a torque specification for the oil filter. Great video as always!
You're a gent mate, just wanted to let you know you're still helping people 5 years down the line! Thank you.
Thank you so much 😁
Great tip at 7.45 ! I was taught this as an apprentice very useful
I think we've all done it the other way and made a mess Paul lol
Hi Martin. Even with those sideways filters, I've found that filling them just enough to absorb the oil and saturate the internal filter element will still give the filter a headstart but not run out of the filter when you install. Actually, even a 1/4 or 1/3 filled won't run out if you're quick.
To be honest, it doesn't really matter but I take your point.
I do that, I also fill via the outer holes, so it's filtered.
I know how to do an oil change, I don't have a vectra.... But I still watch your videos!
My uncle used to work at a Vauxhall Dealership. He said if the Z18XE burns more than a litre of oil between 10-12k intervals it had a hard beginning to life, probably an ex rental.
Hi. Your Rottweiler is so beautiful.
Whilst you're there, clean the leaves, check the condition of the belts, check any rubber hoses for cracking, check coolant levels, PAS fluid, washer fluid, battery terminals, etc. Pretty much whilst waiting for the engine to drain.
Yes but this video is for changing the oil and filter so when people search RUclips for info on filter and oil change on the Vectra, that's what they get.
Thanks for the video. Very helpful. I used the funnel from my dishwasher to help with the top up it fitted perfectly.
Almost forgot, thanx for a good informative video.
Good video as always Martin and pleased to see the Vectra is going strong
Yes, its a great runner and she deserved a treat lol
Lovely looking Reliant chassis in the background Martin! That'll be next week's job then.
Yes, that's getting the brake and fuel lines run in soon.
Any chance you can do a vid on gearbox oil mate
You make it look so easy mate! Some Fab tips there. The Mrs has a mini and it's a real pig to work on.
Tell me about it Dan, I like a bit of room in the engine bay lol
excellent job martin,always a pleasure to watch,all the best .................dougie
as the oil filter seal comes off the filter now days i would put oil on both sides as they can leak when you only do one side it happend to my self but good vid for some beginner to have a go
great video martin, its good to watch and handy for the little tips you give, good to you got Sharon in on it too hehe. its a thumbs up from me and I look forward to the next video
Nice video and nice renault clio in the back
Yes, its Jimmy's, You'll see the spare wheel on the front as he went down a pot hole and bent the rim.
retrorestore ruclips.net/video/Ch6wEE3U6ko/видео.html
Great vid Martin 👍
Cheers Jamie.
Good Video my vans burning oil on start up but I’m not going to rip the top of the engine just to fit a few new valve stem seals if it burns oil heavily when driving then all do it then
Martin, have you ever considered getting OP COM/VAUX COM. It is handy for diagnostics and clearing fault codes. You can even program stuff like keys. I got mine on eBay for £20. I wish I'd bought it when I had the Astra G (Mk 4). I can use it on both the Vectra and the Corsa.
Nice video as always Martin. All the best Steve
Thanks Steve
Good video as always . For next time you might want to go to the dealers for the oil I bought 10l for my vxr vectra and it only cost me £40
That's a good deal, Can't remember what this cost lol
nice vid and advice Martin wish mine was 4.2 litres of oil , mines an eye watering 5.9 litres .. cheers Steve
Expensive that Steve .
Love these videos Martin. Keeping it real man. Yeah
Cheers Robin
Love your wonderful job;
help subs ; if you are interested; i will do same; thank you friend.
Good instructional video Martin. But, how many people change their own oil? Or, if they change oil at all. Sometimes we get coupons in the mail for 20% off an oil change at a local garage. If you build up some work with a local, if a big repair comes up and you're a regular customer, they go easy on the bills. But I know you make these videos to show people it's not hard to do yourself.
Its for the people who do their own stuff Bri, like me.
Cheers
Martin
Could you do a video on hunting problem on your Vauxhall zaferia please
That reminds me that I must also do a oil change on my car. Unfortunatly I am a lot over the service interval :-o
Yes, so was I Bernd so I had to do it.
Did you have to reset anything on the car's computer, does it keep track of when the oil was changed?
No bud.
Nice tips Martin .. We have all done the can mess lol.
Think i have a candidate for the worst mower ever
it is not a total turd but has a 2 stroke motor with
the ratchet start like the one Peter Anderson has
not set points for years if , I can remember .
Cheers
Pete.
Get it going then Pete and record it lol
Oh yes Martin it will be done. Time for the GoPro.
Love your wonderful job;
help subs ; if you are interested; i will do same; thank you friend.
This'll give you a grin. Think you know I've had my Clio for 18 years now. Book says 10,000 miles but for a few years I did it at 6000, filter every 2. Time before last I filled with a half full 5ltr can. Before I've always just put 5ltrs in. Well I couldn't see the clean oil on the mark, put miles too much in so had to drain some lol. Year last September they only had synthetic so put that in. Only did about 5000 miles so left it this year. Better oil, so better to leave it.
Haha, you need some new glasses then Malc lol
It's either 10K or yearly. Some people only go by mileage.
LOL Martin.....won't make that mistake again.
I done 12k so it was overdue a change.
Couple of thousand won't hurt. It's when they've done 60,000 plus and the sludge bungs the inlet filter that you have a problem. Quite a few years ago, one came into the garage that the sump plug was rusted in.....never had an oil change since the first service it had when new.
Brilliant video Martin! excellent engines the 1.8's, bought a Vauxhall insignia 2 years ago couldn't bear to let my vectra go so I kept it and is getting used more than the insignia and with the amount of miles I do for work its nearly at 200K. oil changes every 5000 miles, best think you can do I believe!
Yes, its a reliable motor and I hope for many more miles James.
In my opinion is better car than insignia, I had 4 vectras,yesterday bought 2008 1.8
Insignia is nice,prety,but that comfort you dont really get!
Is exactly the same engine I think on insignia and vecra c last model...some small bites are different,both of them having problems with overheating,I dont know why...
👍 good video Martin
Love your wonderful job;
help subs ; if you are interested; i will do same; thank you friend.
Cheers Doug
This story is so funny my brother who is not as mechanical person changed his oil forget to put the drain plug back when filled up he face was so funny
I've not done that but i've seen it done though lol
If you said my hair looked rough I would have started the car in gear. Have you noticed brands like castrol only do 4 litres bottles of oil.
Yes I have noticed that. Your hair is lovely, just like Lee's lol
Hair's looking a bit ruff darling LOL classic
Haha, Say what you see lol
Love it
Thanks Adam.
Will this be the same as 2005 plate ?
This is a Vectra C
Good video and I appreciate you taking the time but just done a qashqai at ATS for £35 inc filter (with on line £5 voucher). There is nearly always a engine splash plate so it would take at least an hour. Is it worth it ?
Its down to the individual but its something I have always done.
Fair enough
Hi Martin, where about do you get your oil and filters from?
A local company called Linco
What's you oil burn with this? Cheers!!
It doesn't burn any oil
@@retrorestore How many miles has it done? Mine (exactly the same car) with 160,000 burns 100 ml every 1000 miles :)
Has the Mondeo gone?
Yes before the Vectra.
when astra vxr? :D regards
its been sold bud
i just done my servic on my car martin
Nice one Chris. Bit cold out today though.
i used to the cold lol
Martin, I've done a service on a 2004 Vectra 1.8 petrol which has pretty much the same engine. (Z18XE)ruclips.net/video/8lw6F4kyTaE/видео.html
You shouldn't just rely on the trolley jack. Axle stands or wheel ramps are safer. NEVER use tools to tighten the oil filter. ALWAYS do it by hand. Other than that you're spot on with your oil and filter change.
I know all about Jacking cars up and using Axle stands but I just took the jack up about 3 inches off the springs so It was not an issue. If you see, I didn't actually lay under the car, it was just to get a bowl in easier.
Some people can't grab an oil filter so the plastic spanner wrenches are a safe bet in these situations as you can't apply too much force to them or they will break.
Thank you for your concern though.
I find do the filter up by hand and then nip it up with the tool, not enough that you damage the paint on the replacement filter. Doing it up by hand only is an engine fire waiting to happen. Seen far to many cars where the filter works loose. Infact there is probably an adapter and a torque specification for the oil filter. Great video as always!