Flying Squirrel - The Next Generation FPV Cinema Drone
HTML-код
- Опубликовано: 22 окт 2023
- The Flying Squirrel kit is sold here: strawhataerial.com/products/f...
If you wish to purchase a BNF fully assembled Flying Squirrel please fill out this order form: neartail.com/sm/vD0QgQFHL
Visit the Rotorbuilds page for the Flying Squirrel to decide what components to choose: rotorbuilds.com/build/31765
***No stabilization or rolling shutter correction was applied to the footage, only a simple color grade.
The Flying Squirrel is finally finished! This design was conceived of in April 2023 and it's taken hundreds of hours of design, prototyping, and field testing to create the best performing naked BMPCC4K FPV drone in existence.
The components used in this flight demonstration are:
- 2X Auline 3300mah 4S in series (8S)
- Xing 3110 900kV Motors
- Gemfan 8060 carbon fiber props
- iFlight Succex 80A 8S ESC
- Foxeer F722 V2 FC (with 100uF cap soldered to 5V circuit for noise reduction)
- TBS crossfire
- DJI/caddx air unit with nebula pro (This frame is 100% compatible with DJI O3)
Camera settings used in flight:
- Laowa 7.5mm ultra light lens (150g) at f/22
- 4 stop ND filter
- Silicon Pro 128GB Cfast
- 24 fps
- 144 deg shutter speed
- BRAW 12:1
The sensor noise indicated in the flight footage is caused by a worn out/not fully seated sensor ribbon plug. This was a prototype with mismatched carbon plates from previous models which put extra strain on the sensor ribbon cable so it wasn't able to seat properly sometimes. This is a non-issue with the production version. In addition, this camera PCB board has been swapped dozens of times so the mating cycles on the ribbon socket is probably over 20 cycles by now due to the development process.
Music:
Wave Saver - Humbot 
Кино
A Cinelifter you can Hand Launch!? I'm In!
Haha, it's not quite "pocket sized" anymore though, but neither was the original camera.
Oh cool it's Potato Jet! Lol can't wait to see him having fun with one of these on his channel next 😂
@@tjthedogtrainer Totally thought the same, not surprised to see Gene here :D
was now gonna mention you
I get the puckered O-ring flying my Gopro onboard... You got the stones to put a BlackMagic camera on yours! I bow to your testicular fortitude!
I was gonna say, you gotta have a fair bit of extra cash lying around to just throw a BMPCC around like that and over water. I don't even want to lose my analog only camera drone, lol.
😂😂😂
#facts
There’s no way to buy it already built?
@@yusiffranklin1754 I think this system is moderately DIY. Look at the website and it shows at what level you get the kit.
One Word---------------------EPIC!!!!!!!!!!!!!!!!!!!!!!!!!
You're flying this cine rig like most people would fly their acro beater quads. That speed is unreal! You're making that huge outdoor space feel like a small backyard. And the quad is taking all that!
Amazing.
He's done some time based speed changes in post, for the creative element of it.
Thanks! 8S really changes the landscape and you can eat it up in very little time. The vertical arms give better control at high speed due to aerofoil effect which provides lateral movements without having to tilt the entire drone as much.
@@PiDsPagePrototypes Actually the only editing to the footage is color grade. It makes me happy that you think I did speed changes to the flight footage haha! It's very fast and no speed ramping was applied to any of the footage, it's all raw.
@@strawhatsam wow! Try to film something thats going REALLY FAST then. It's will be easier for the viewer to understand how crazy this rig are.
I thought that footage is sped up by 300%! Very cool
@@strawhatsam and a little bit of gyrostab is necessary. But anyway this is a very cool project
Love the damn song. And the flight is super rad
Wow thans insane man. It makes my monday after work. You did a great job!
Thanks a bunch, I'm glad you enjoyed!
It should be illegal to casually drop vids like this man... Amazing
Oh man that arm structure is a 15/10. This is awesome! Fantastic work! Looks incredible
i've never been that excited over a frame design. It looks like there is every little thing that we can dream of; except for weatherproofing. But I guess for winter/snow I could tape the helll out of that thing.
Thanks Kabab! Yeah truss arms are certainly stiff. The only disadvantages of them though are less durability and more susceptible to secondary harmonics so dynamic notch filters are important to keep enabled for this frame.
@@strawhatsam yeah unfortunately I'm well aware of the challenges of this sort of arm structure. I would test 1mm thicker carbon for the spars...may not make any difference.
It's the 3D element of the arms in the Z plane that I'm specifically referring to when I say the structure looks good. It'll never be close to perfect unfortunately. Overall weight distribution is not ideal on the craft but you're very limited by the desire to have as small of a footprint as possible. Overall for what you're trying to accomplish I think this design looks wonderful
Absolutely breathe taking design.
Damn she flys like a freestyle drone props to u for designing such a dope design. Bet damn good center of gravitiy everything packed into the middle.
Not bad, not bad at all! Great acrobatic video! So beautiful!🎉
Wicked edit💯👊👊😎🔥💪🔥💪🔥🙌🙌🙌🙌🙌
yes hitting the gaps. Full send!
That footage is just pure eye candy
Thank you!
You've literally created a new genre! Cine-Acro
Straw Hat got my attention, for sure!
OMG! Wow! WTF! I look forward when available.
3:33 uht, scratch the take, saw a shadow; lol. Beautiful everything
As someone that used to design and sell racing drones, you have designed some seriously nice solutions into this frame, Nice work!
I love that drone setup.............
This is the craziest freestyle drone I've ever seen
imagine seeing with that quality in realtime one day!
The lack of stabilization is rough, but that image quality is breathtaking. Can't wait to see more flights on this rig.
the whole point is to showcase its flying capabilities...
@@PRZFPV That's kind of what I meant. Seeing that image quality while performing like a 5 inch freestyle quad is mind-blowing. Sorry for lacking clarity.
You can easily stabilize it in post. Every flightcontroller has a gyro in it.
You will obviously loose some quality but thats no diffrent on a action camera.
@@r00kiet80 BMPCC4K has gyro data recorded with the latest firmware. That should do the trick, shouldnt it?
@@r00kiet80 If you plan to stabilize in post, just make sure to record with a fast shutter speed/angle to get rid of any motion blur. Then you can always add pixel motion blur back in post as well. Otherwise your footage will be technically stable but it will become blurry at (seemingly) random moments.
In all my life of FPV, I've never felt the chills like you just brought me now.
I'm glad I was able to inspire!
Wonderful!
Excuse me sir, you are not supposed to fullsend a camera like that! This is totally bad ass and I love it. Well done 👍
Nice work Sam.
Ok, so this shiznit is AWESOME!
I enjoyed your rip! 😊
Awesome View
Just ordered five new black magic flying squirrels 🐿️ ‼️👌🏾🔥📸 #FreshTasteGroup
absolutly insane !
Man that is awesome!
That IS something!
insane drone.
insane footage.
insane editing.
video 15/10
Jaw dropping 🙌
Loved it!
Good stuff! 👍
That may be the best footage I've ever seen from a compact drone. Finally, a cinematic sensor on a small drone. This is how it should be. Well done.
Absolut epic 💯👌🏻😎👍🏻👍🏻
Amazing!!
great edit!!
Very well thought and pragmatic design! Loved the integration of carbon fiber and 3D printed parts!
💅my favorite part
This was killer
This Spot Is UNREAL!
This is why I’m here this footage is amazing love this right here can’t wait till I’m ripping like this!! Great video mate!
That design is super well thought through. So cool integrating the camera into the frame!
This is an awesome evolution of the naked setup! So cool
Badass!
Incredible
So sick on many levels! Great work!
Sick location, editing and music! Thanks, I enjoyed it!
Unbelievably epic!! Great storytelling as usual.
This is the most incredible thing I've ever seen! Unreal build development.
Holy smokes. That's some fantastic gear and skills!
Work of Art!
Awesome
Wow this is insane! I love how you put this together. Stunning work! 🔥🤩
Epic bud ❤❤❤
OMG! Absolutely amazing footage!
I gotta bring back the word "RAD" for this. Rad!
Liked…liked real hard
That thing looks sick! 💪🏻 great work
Beautiful!
also perfect spot to show off this new rig ✨
That thing rips
Damn dude. This is bringing me back to the time I got to fly on lake Atitlan in Guatemala. It was no FPV flying, but the stillness of the lake and everything. It's all there. Good shit Sam 🙌
Coulda given us nice smooth cinema shots and we all woulda been fine. My man goes balls to the fucking wall ripping thousands of $$ like it’s nothing. A straw hats off to you sir 🫡
Verry nice bro
Looks amazing !
Holy shit this is bananas!
Incredible!!!
Incredible bro. The craftsmanship and ingenuity in all your quads is beautiful! I neeeeed this!!!
So cool I really like the design and the capabilities fpv has gone to. I never knew we would get to the point where fpv can carry movie cameras and pull of sick stunts. 😮
This Flying Squirrel is a serious piece of kit! You sure are a skilled flyer.
Nice!
Simply amazing. 'nuff said.
thats one of the most beautiful cinelifters i have ever seen
This looks so sick! I’m looking to take the next step up from GoPros and your naked BMPCC seem like the way to go
Thats one sleek design well done
This looks beautiful!
That location!!
it's kind of wild how small good camera can be nowadays
Will be having Troy at qsl build one of these for me soon! Incredible design man
Awesome! He's built a couple already so you should be in good hands.
That looks insanely good!
Oh, thats insane drone. Amazing work, my respect.
Looks siiick
Fantastic work 👍🏻
super dope💪💪💯💯
Insane, the absolute materialization of the term "fly it like you stole it". Definitely interested..
Refreshingly good 👍🏻
This looks next level to me, my how far drone and FPV flying has come
❤ at first sight🎉 what a frame and flight🎉. Will this take a normal stack? Interesting build ❤ from South Africa 🌍
Will definitely be ordering one !
Cooool!
dude so buttery smooth 🎉
Looks sick! pusher setup works well.
wow 🔥
Amazing sam