im looking at putting a 5.7 ls in a 1977 chevy g20 van with either haltech or holley controls. what would be a super easy way to control a 10l90 with all of the control of the haltech or holleey software?
So I have this kit on my LS swap Tacoma but I have a Holley terminator max x and was wondering if you know how to get the terminator to communicate with paddle shifters
What are the dimensions Mitch? Width mainly but also the thickness please. Can it be used with the Digital Dakota RTX gauge info center and remove the red LED box on the paddle shifter frame?
That looks like the zero gravity paddle shift kit. Have you looked into leveraging the TUTD pinout on the T87 transmission controller? From what I have seen it's a a few resistors in line and then buttons to indicate up/down. I would think in line wiring would be better than bluetooth to a can bus module.
hello I just saw your video of the operation of the paddle shifter PCS I bought the same one but I have a problem with the electrical connection can you help me thank you
Do you have any problems with it losing "connection" not allowing you to shift? I have one and sometimes it will lose itself and I will be stuck in a gear. Or I will be driving and it will be in 5th and all of a sudden the display goes blank and then pops back on
Had alot of issues with this system, constantly getting stuck in a gear. Display would say wifi error. Took it out because it got so bad. Waiting for another company to make it.
Need one for my C10 LT4 with 10L90 swap. Keeping it a column shifter so this would be awesome. Does it work with 10 speed? Everywhere I read about these only says 4 5 & 6 speed.
4l80e will require an aftermarket transmission controller. Pretty sure this paddle shifter assembly comes from powertrain control solutions which should sell the controller included in a kit... for an extra fee of course. If not they have it somewhere on their site anyway. 6l80 and 8l90 have computers built in. If anyone has more info I could benefit as well
This is incredible!
Watching my own video before I install another one of these on my other truck! 3 years goes by quick
Are u stilling the paddles shift kit
hi mate, did you programme the 6L80E TCM for this..Thanks
You think this would be available on a 2014 Silverado? I use the +- buttons already so having paddles would be so much nicer
im looking at putting a 5.7 ls in a 1977 chevy g20 van with either haltech or holley controls. what would be a super easy way to control a 10l90 with all of the control of the haltech or holleey software?
PCS is a high quality product and I'd recommend it to anyone doing a swap!
So I have this kit on my LS swap Tacoma but I have a Holley terminator max x and was wondering if you know how to get the terminator to communicate with paddle shifters
AWESOME good work i was talking about this in my recent video where i removed a 6L90 transmission from an express van.
Have the same transmission and pcs system constantly wouldnt shift with this tansmission
I put a L86 with a 8 speed in my jk would love that any way to convert that to a jk steering wheel ?
What are the dimensions Mitch? Width mainly but also the thickness please. Can it be used with the Digital Dakota RTX gauge info center and remove the red LED box on the paddle shifter frame?
That looks like the zero gravity paddle shift kit. Have you looked into leveraging the TUTD pinout on the T87 transmission controller? From what I have seen it's a a few resistors in line and then buttons to indicate up/down. I would think in line wiring would be better than bluetooth to a can bus module.
Does it work without the need for a floor shifter?
Yes
Looks great! Looks like Powertrain Control Solutions paddlers 🤔
i dont see these on your web sight ? where do i get these paddles ?
hello I just saw your video of the operation of the paddle shifter PCS
I bought the same one but I have a problem with the electrical connection can you help me thank you
What brand of paddles are those and what other parts did you use for the swap ?
Nice to see finally,but compared to the zl1 10 speed,night and day Seems like alot of lag between shifts
Will this work for a 2019 GMC Sierra Denali with a 10 speed transmission??
Good deal thanks😅
I just got my paddles installed on my 10l90 but can’t get them to work what did you have to do in the tcm to get them to work ?
You cant have any codes in the tcm so make sure it is looking good dtc wise
Do you have any problems with it losing "connection" not allowing you to shift? I have one and sometimes it will lose itself and I will be stuck in a gear. Or I will be driving and it will be in 5th and all of a sudden the display goes blank and then pops back on
Had alot of issues with this system, constantly getting stuck in a gear. Display would say wifi error. Took it out because it got so bad. Waiting for another company to make it.
@@jrmiller3368 wifi. connection? No thanks
Is this tci if so do u need the base trans controller
will that work with the 8L90 using the T87A TCU
Where did u get from
Is it just me of does it seem it shifts very slowly? I have had a Porsche and an Audi with paddle shifters that was an instantaneous shift.
Ya I noticed that. My vw gti shifts instantly. But it has a dsg tranny with a clutch. Its reasonable that a slush box will have a delay.
6l80 are not DSG they shift slow that’s the way they are :(
Need one for my C10 LT4 with 10L90 swap. Keeping it a column shifter so this would be awesome.
Does it work with 10 speed? Everywhere I read about these only says 4 5 & 6 speed.
Did you ever get paddles? I’m wanting to do the same, how are they working out?
I installed this unit in my car, but I can’t find anybody to program my 6l80 to work with it. It won’t go into manual mode
What about the 4l80E? What is the length paddle end to end?
4l80e will require an aftermarket transmission controller. Pretty sure this paddle shifter assembly comes from powertrain control solutions which should sell the controller included in a kit... for an extra fee of course. If not they have it somewhere on their site anyway. 6l80 and 8l90 have computers built in. If anyone has more info I could benefit as well
@@jeremym8748 I don't see anything for the 4l80 on their site.
SNAPPING NECKS
can i order it still?
If youre ever in the mood to do an LTG harness I have one
I do the ltg as well. Email me at swaptimeusa@gmail.com
Will Work So Fluidly E36 L67 and THAT'S SPOT ON BULLSEYE
Im interested
What's your instagram?