What an amazing journey from start to finish! The details and restoration techniques are truly incredible. Definitely a video worth watching and learning from.
Bonjour, Superbe messieurs c'est vraiment un travail magnifique, malheureusement en France un tel professionnalisme ne doit pas exister, félicitations.
I believe that these videos are only for the curiosity and skill of the repairman, a vehicle like this will never have the structure to withstand another impact.... Would anyone trust it???
You bring up a valid point. It's essential for consumers to make informed decisions about the safety and reliability of repaired vehicles. Some may feel comfortable driving a repaired vehicle, while others may prefer to invest in a new or certified pre-owned vehicle with a clean history.
This us a body on frame vehicle, all the sheetmetal they straightened gives almost zero protection as there are no reinforcements in it as far as I've seen. It hs basically holding the fenders on. All the strength is in the frame and the bumper that is attached to the frame in this case.
There is NO way this was $1000, maybe to buy, but to fix. Parts alone are way more. As long as the structural crash system was replaced to stock form, it should be OK.
Guys you did a great job bringing back together, that brings back memories of me doing this same thing to brand new cars smashed into the windshield keep up the good work
Hello my name I want get back into rebuilding and body work on different car I'm 53 years old it's never too late I was In a head on collision car accident and by the gave of God I'm back so I'm in Michigan how can I get a fare change at working with my own hands that my gift will make room for me my # 248 991 2215 could please put me through the right door of apport unity
One word: Annealing. Every single one of those severely bent areas were hardened by deformation, and hardened even further by "straightening". All of them are cracked or will crack when stressed.
Indeed, after the metal is deformed, it is easy to deform and crack when it returns to its original shape. Heating with a spray gun is a good method, but it will also lose the toughness of the metal.
It would have been much better to have replaced all the damage parts, rather than beating all the dents out.. This would not pass any inspection here in the states.
Obrigado pelo elogio! Eu pessoalmente não trabalho em uma fábrica de automóveis, A habilidade e o conhecimento adquiridos ao longo dos anos contribuem para realizar restaurações como essa de forma eficaz e impressionante.
@@xinxianshi it really must be some kinda great car to go through all this work..I have to say you all did a great job..I would drive the wheels off of it..🤪🤪🤪🇺🇸🇺🇸🇺🇸
Here in the UK something like that would be a write off and scrapped. Kind of a good job it was body on frame too because if was integral much more work would have been needed.
When I was in the motor trade in the 80’s we repaired cars like this all the time - even reshelled cars that were too bad to repair - slot of the body work skills are gone now - I worked with some fantastic panel beaters all old school and could repair anything.
Hello! I'm glad to hear from you. This video is not a professional repair of Nissan, but after watching enough, it is a good idea for Nissan to try another method.
The cost of this car is very cheap. As a domestic brand off-road vehicle, the new car sells for just over 10,000 US dollars. The price at auction at the scrap car factory is about 2,000 US dollars, plus the repair cost of 1,000, it is less than one-third of the price. It is still a good deal to buy a car like this. After restoration, this car is only used near the farm. The price/performance ratio is very high.
Dont know. Pulling the upper unibody nor replacing major structures. Frame od truck is good after you take off the body? Using a rhe frame machine and not tying it down? How do you get Pulling power? How will it come out. Seen alot of vehicles fixed before and lot of hack jobs. Videos are tuff sometimes to really determin how good ,or not is. Kinda scary to fix some vehicles and of they are really safe. Lot of vehicles can be fixed . But at what cost and at what price comes with something to be safe again
Always been a question to me . Why on earth repair stage like this. The way I would do it before even touching is to strip the interior first then pressure wash exterior then start the process. but I don't see that. someone tell me why !?
This is absurd, this car will never take another hit, this is a leaky boat, and it will sink again, this should be a crime, selling an old can like that, this makeup can't take anything, if there is another head on collision everyone will go die, in Brazil this car is a total loss and sent to the scrapyard to sell the good parts that are left, and the insurance pays for the car completely, or gives the value in cash.
Hello, everyone has different judgment standards. Vehicle repair is indeed not satisfactory, but the repair price is cheap, so some people still choose to repair it here.
@@xinxianshi I really believe that you are an excellent professional, but there is a certain limit to where you can repair and where you have to go to the junkyard.
This looks much worse than it actually is. The real structure and strength is in the frame which was literally untouched in the wreck as the impact was above the frame. This is a time consuming, but relatively easy repair overall. I wouldn't be afraid to drive this anywhere after the repair is complete.
Hola, los autos accidentados similares son muy baratos sin importar en qué país se encuentren, pero antes de ser reparados, tienen canales de venta especiales y, por lo general, no se enfrentan a los consumidores comunes. Por supuesto, comprar autos reparados es más barato que los autos usados sin reparar. Los coches son mucho más baratos, depende del mercado local.
@@xinxianshi i agree it has to be done properly i am a colisyon speacalist in the auto body and frame repair and this reapir would not be alowed to be road worthy again since it was not done properly
Hello, the vehicle is fixed on the stand through clamps, and there is a force behind the vehicle that pulls the rear end of the vehicle. Unfortunately, it is not shown in the video.
Ca m’étonnerait beaucoup que cette réparation n’à coutee que 1000 dollars ! De plus il aurait fallut changer les éléments de châssis supérieure au lieu de le redresser et ressouder ,métal croqué donc moins de résistance en cas de nouvel accident ! 🥶
This repair was to restore the vehicle to a normal driving state with the least amount of money, and they did it. The continued use of the repaired sheet metal parts saved hundreds of dollars in this repair.
China men are doing Pakistani job. I've seen so many vlogs of Pakistani repair. Now I see these guys are different. They wear gloves, shoes, they work inside and have a spray booth. Great work dude.
Well seeing that vehicle already injured or possibly was involved in a fatality, I wonder if one day we'll see it again being repaired on this channel.
You're absolutely right about the importance of eye protection, especially in environments where there are potential hazards like flying debris, sparks, or chemicals.
Hello, they are right. After the repair, there will be some loss of safety, but it is not as serious as they say. There are many repaired cars that can still be driven normally on the road after many years.
Estoy totalmente de acuerdo. La seguridad es una parte fundamental de cualquier trabajo, y soldar sin protección visual puede causar daños graves a los ojos debido al intenso resplandor y a las chispas generadas durante el proceso de soldadura.
Bonjour, bien qu'ils utilisent leurs propres méthodes pour éviter la lumière forte, nous, les gens ordinaires, devons porter des masques de soudage lors du soudage, et il est également nécessaire de protéger notre peau.
Indeed, repairing damaged vehicles, especially those with significant structural issues, can be a daunting task. It requires a combination of technical expertise, experience, and meticulous attention to detail. While some may feel intimidated by the extent of the damage, skilled technicians can often assess the situation and develop effective repair strategies.
WITH A FRONT END DAMAGE THEY SHOULD OF REPLACED THE FRONT END WITH NEW PARTS OR SECOND HAND OF A REAR COLLISION ONE TO GET A GOOD VEHICLE THE BLOKE IN THE GREEN TOP MADE ME LAUGH WITH EYE PROTECTION ON HIS HEAD NOT USING IT AND SQUINTING HIS EYES HOPING NOTHING WENT IT LOL 😂😂😂
This car is not anymore safe as the strong structure has pulled to the original shape. Never use old safety structure parts after collision. They all must be renewed. Let’s hope this car will never collide as it doesn’t protect as well as it did.
Appearance repair does not guarantee the original safety, but it does not mean there is no safety at all. Driving at low speeds will not have much impact.
Esse carro no Brasil, as seguradoras,avaliam como perda total.....esse carro mesmo recuperado, pode sofrer trepidações durante o trajeto...nunca mais será o mesmo
That's a valid concern. While skilled craftsmen like can work wonders in repairing heavily damaged cars, there can be limitations to how much structural integrity can be restored, especially after severe damage.
What an amazing journey from start to finish! The details and restoration techniques are truly incredible. Definitely a video worth watching and learning from.
Bonjour,
Superbe messieurs c'est vraiment un travail magnifique, malheureusement en France un tel professionnalisme ne doit pas exister, félicitations.
I believe that these videos are only for the curiosity and skill of the repairman, a vehicle like this will never have the structure to withstand another impact.... Would anyone trust it???
Bei einem Normalem Fahrzeug gebe ich dir recht aber das hier ist ein Fahrzeug mit Leiterrahmen da kommt der Widerstand her .
Of course not ❤
You bring up a valid point.
It's essential for consumers to make informed decisions about the safety and reliability of repaired vehicles. Some may feel comfortable driving a repaired vehicle, while others may prefer to invest in a new or certified pre-owned vehicle with a clean history.
This us a body on frame vehicle, all the sheetmetal they straightened gives almost zero protection as there are no reinforcements in it as far as I've seen. It hs basically holding the fenders on. All the strength is in the frame and the bumper that is attached to the frame in this case.
There is NO way this was $1000, maybe to buy, but to fix. Parts alone are way more. As long as the structural crash system was replaced to stock form, it should be OK.
Guys you did a great job bringing back together, that brings back memories of me doing this same thing to brand new cars smashed into the windshield keep up the good work
Thank you for your kind words! Bringing a damaged vehicle back to its former glory can indeed be a rewarding experience.
People have a lot to say but the videos are great , keep it coming
Thank you for your encouragement
Nowhere as good or as structural sound as the original guys work
Very hard work to fix the car and the car can be very great again very great work
Yes, thank you for understanding us, glad you enjoyed the video
Great workmanship! 😎👍
Very Talented ,Delligent & Ful Skill Good Job , Thanks All, ..... Cheerio,*****.
Thank you for your compliment and wish you a happy
Hello my name I want get back into rebuilding and body work on different car I'm 53 years old it's never too late I was In a head on collision car accident and by the gave of God I'm back so I'm in Michigan how can I get a fare change at working with my own hands that my gift will make room for me my # 248 991 2215 could please put me through the right door of apport unity
Are you getting these from the insurance co. as totals and fixing them on your spare time for resale . I can't se the Insurance fixing these cars .
Yes, this car was bought at an insurance company auction. Someone specializes in buying cars like this and then repairing them for a profit.
Impressionante!! Ficou muito bom!! Parabéns 👏👏👏👏👏
Gracias, me alegra que te guste el vídeo.
Great workmanship. Respect!
Good work drilling out the spot welds using a cheap drill.
Ficou legal 👏👏👍👍
One word: Annealing. Every single one of those severely bent areas were hardened by deformation, and hardened even further by "straightening". All of them are cracked or will crack when stressed.
Indeed, after the metal is deformed, it is easy to deform and crack when it returns to its original shape. Heating with a spray gun is a good method, but it will also lose the toughness of the metal.
If I was broke to the dime, I would drive it but fully be aware that it’s worth nothing anymore.
It would have been much better to have replaced all the damage parts, rather than beating all the dents out.. This would not pass any inspection here in the states.
Nothing wrong with this repair, no chassis damage, well done keep up the good work.
Heard of metal fatigue? I think not
Pobre do próximo proprietário, bateu, morreu .
You don’t have a clue what you are talking about.
Este foi top. Sensacional. Uma pergunta.. vocês já trabalharam em fábrica de automóveis? Realmente fantástica esta restauração. Parabésn.
Obrigado pelo elogio! Eu pessoalmente não trabalho em uma fábrica de automóveis, A habilidade e o conhecimento adquiridos ao longo dos anos contribuem para realizar restaurações como essa de forma eficaz e impressionante.
What car was it, so easy to remove body from frame, Prada ??
Vocês estão de parabéns pelo exelente trabalho de recuperação desse veículo....!!!
Can you tell me what make (& manufacturer) and model this car is ?
Hello, this car is the Chinese brand Jiangling Motors-Yusheng（江淮汽车驭胜柴油版）
@@xinxianshi it really must be some kinda great car to go through all this work..I have to say you all did a great job..I would drive the wheels off of it..🤪🤪🤪🇺🇸🇺🇸🇺🇸
Спасибо❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
He added another option to this suv. It now crab walks😂😂😂
Here in the UK something like that would be a write off and scrapped. Kind of a good job it was body on frame too because if was integral much more work would have been needed.
regulations and standards for vehicle repair and salvage can vary significantly from country to country.
@@xinxianshi It's quite strict here and every car that has major damage and gets repaired has to be inspected.
I think it was scrapped, and purchased from a salvage yard as scrap.
@@vicmabus1532 We have salvage yards here that sell crash damaged cars. Some aren't too bad and do get fixed,
When I was in the motor trade in the 80’s we repaired cars like this all the time - even reshelled cars that were too bad to repair - slot of the body work skills are gone now - I worked with some fantastic panel beaters all old school and could repair anything.
Hello my friend I hope you are good health I see this video it not good or bad thanks about this video ( Kuwait 🇰🇼)
Hello! I'm glad to hear from you. This video is not a professional repair of Nissan, but after watching enough, it is a good idea for Nissan to try another method.
He learned to blink in perfect sync with welding impulse
😂
I really enjoy watching your channel you are very knowledgeable at what you do keep up the excellent work
Thank you so much for your kind words!
What was the cost and length of time worked on this vechile
The cost of this car is very cheap. As a domestic brand off-road vehicle, the new car sells for just over 10,000 US dollars. The price at auction at the scrap car factory is about 2,000 US dollars, plus the repair cost of 1,000, it is less than one-third of the price. It is still a good deal to buy a car like this. After restoration, this car is only used near the farm. The price/performance ratio is very high.
Did they check the frame if it's bent; they the body off.
May I suggest to wear glasses when drilling and mask when welding?
You should wear your goggle glass for safety when you use welding for metal sheets.
Gokil👍👍👍👍👍
Good job lads
Dont know. Pulling the upper unibody nor replacing major structures. Frame od truck is good after you take off the body? Using a rhe frame machine and not tying it down? How do you get Pulling power? How will it come out. Seen alot of vehicles fixed before and lot of hack jobs. Videos are tuff sometimes to really determin how good ,or not is. Kinda scary to fix some vehicles and of they are really safe. Lot of vehicles can be fixed . But at what cost and at what price comes with something to be safe again
Always been a question to me . Why on earth repair stage like this. The way I would do it before even touching is to strip the interior first then pressure wash exterior then start the process. but I don't see that. someone tell me why !?
This is absurd, this car will never take another hit, this is a leaky boat, and it will sink again, this should be a crime, selling an old can like that, this makeup can't take anything, if there is another head on collision everyone will go die, in Brazil this car is a total loss and sent to the scrapyard to sell the good parts that are left, and the insurance pays for the car completely, or gives the value in cash.
Hello, everyone has different judgment standards. Vehicle repair is indeed not satisfactory, but the repair price is cheap, so some people still choose to repair it here.
@@xinxianshi I really believe that you are an excellent professional, but there is a certain limit to where you can repair and where you have to go to the junkyard.
This looks much worse than it actually is. The real structure and strength is in the frame which was literally untouched in the wreck as the impact was above the frame. This is a time consuming, but relatively easy repair overall. I wouldn't be afraid to drive this anywhere after the repair is complete.
Agradezco mucho su atención al contestar mis preguntas maestro.
Un auto reparado que ya no lo quiere el cliente, sería caro comprarlo en México?
Hola, los autos accidentados similares son muy baratos sin importar en qué país se encuentren, pero antes de ser reparados, tienen canales de venta especiales y, por lo general, no se enfrentan a los consumidores comunes. Por supuesto, comprar autos reparados es más barato que los autos usados sin reparar. Los coches son mucho más baratos, depende del mercado local.
@@xinxianshi Maestro, que costo tendría un Nissan 2020 ya reparado por ud y con envío a México?
This going be a cowboy job lol 😮
Good man ❤❤❤❤❤
Nice looking Peugeot
I hope the new owner is told that they should never ever drive this vehicle. It’s now only good for a driveway ornament
Und wieder alles ohne zu vermessen auf der Richtbank!! Das ist alles Murks. Ich möchte so ein Auto nicht mal geschenkt.👎👎👎😱😱😱 Viele Grüsse aus Germany
main structer was not repaired right once its beeen bent that has to be replaced not safe
Ya, struktur utama yang rusak memang harus diperbaiki dengan benar.
@@xinxianshi i agree it has to be done properly i am a colisyon speacalist in the auto body and frame repair and this reapir would not be alowed to be road worthy again since it was not done properly
@@SecondHandDIYwhere are you at? I'm in the US and see cars prepared in a similar manner out on the roads.
Hello my friend. Super video and very good work. Acclaim. I hope you are in good health
Thank you for your kind words! I'm glad you enjoyed the video and the work showcased in it.
Как называется этот автомобиль?Какая марка?
This car is called Jiangling
@@xinxianshi Это хороший автомобиль,или нет?Какие китайские марки считаются хорошими,качественными,а какие нет?
Don't even know how they're even pulling without the chassis being anchored down to get a straight pull?
Hello, the vehicle is fixed on the stand through clamps, and there is a force behind the vehicle that pulls the rear end of the vehicle. Unfortunately, it is not shown in the video.
@@xinxianshi ok. I only mentioned because during pulls, car was being pulled with it so didn't seemed clamped. 👍
Suche lexuspreise bis 40.000
Suche lexsusbreisse bis 40.000
In innsbruck
Das Blech hat am Festigkeit verloren sowohl vor als auch nach der Reparatur
😮 inclusive habilidade 🎉
Can you imagine how many pages the car fax report will be on this car?😂😂😂
Fun to watch but where oh where is the PPE?
Will this car allowed to drive again?
What is the model of that car
Engine work costs excluded?
Poderiam fazer um crach test com um carro recuperado pra ver se xom esses reparos o carro continua seguro.
Ca m’étonnerait beaucoup que cette réparation n’à coutee que 1000 dollars ! De plus il aurait fallut changer les éléments de châssis supérieure au lieu de le redresser et ressouder ,métal croqué donc moins de résistance en cas de nouvel accident ! 🥶
Voulez-vous le pepe le pew 😂
This repair was to restore the vehicle to a normal driving state with the least amount of money, and they did it. The continued use of the repaired sheet metal parts saved hundreds of dollars in this repair.
China men are doing Pakistani job. I've seen so many vlogs of Pakistani repair. Now I see these guys are different. They wear gloves, shoes, they work inside and have a spray booth. Great work dude.
Nice work
welding without eye protection not too swift
Hello, thank you for your comment. I know that goggles are indeed necessary. You must protect your eyes.
Good job
But the differences and distances between the pieces are far from each other as is clear in the difference from the driver's side
Hello everyone It looks like this car was crushed by T-Rex I imagine everything needs to be done on this car Good luck to all of you😊
not at all. only structural damage was bent frame rails. I guess some technicians would replace them but the result looks solid.
yeah... the windscreen is not even broken. Damage more localised..
Beau travail mais je n’achèterais pas ce véhicule. J’ai déjà acheté une Cadillac accidenté et ça a été la pire décision de ma vie.
Bonjour, merci pour le partage. Bien qu'acheter une voiture accidentée ne soit pas un bon choix, si le prix est correct, c'est aussi très rentable.
Well seeing that vehicle already injured or possibly was involved in a fatality, I wonder if one day we'll see it again being repaired on this channel.
Wonder what the true cost of replacing car parts and labor were? A lot more than the listed $1000.
how much to do the job
А зачем он в сварочной маске отсверливает элементы? 😂
Good work
Joya, nunca taxi !!!
que contradicción...cuando usa la soldadura no se protege...y cuando usa la pulidora se cubre los ojos..🤔
You guys should be wearing glasses you only have 2 eyes you don’t want to loose them
You're absolutely right about the importance of eye protection, especially in environments where there are potential hazards like flying debris, sparks, or chemicals.
I closed my eyes while they were welding, grinding, and pulling on this poor car. It was a total when they started and it's still a total!
Perfect, Perfect, Perfect!!! You are all AMAZING!!!😀😀😀
Thank you so much for your kind words!
Good work, But as someone said another impact would be risky
Hello, they are right. After the repair, there will be some loss of safety, but it is not as serious as they say. There are many repaired cars that can still be driven normally on the road after many years.
why do they only use the welding hood for grinding and not for welding? They won't stay healthy that way … sad but true
本当に1000ドルで車を直してしまうとは、そんな芸当ができる人間がすごいです。
1,000ドルは中国では7,000人民元以上に相当し、結局のところ、この車はそれほど価値がありません。
A commendable job, but there's nothing like not wearing a welding mask to shorten the life of someones priceless sight.....
I am very surprised that the workers do not protect their eyes when they are welding.😢
Yes, they use the method they created to protect their eyes, so far so good
Mais um excelente trabalho.
That drill needs a new power cord, real soon.
Is it a car or armoured vehicle
Es irresponsable realizar soldaduras sin proteccion visual. Su trabajo es muy bueno.
Estoy totalmente de acuerdo. La seguridad es una parte fundamental de cualquier trabajo, y soldar sin protección visual puede causar daños graves a los ojos debido al intenso resplandor y a las chispas generadas durante el proceso de soldadura.
Wonder what this cost, in US Dollars?
Where is his eye protection not a very good advert for health & safety
I am not sure its an advert at all.
heureusement qu'ils ont les yeux bridés, pour souder sans protection c'est plus pratique !!!
Bonjour, bien qu'ils utilisent leurs propres méthodes pour éviter la lumière forte, nous, les gens ordinaires, devons porter des masques de soudage lors du soudage, et il est également nécessaire de protéger notre peau.
Plus fort que dans l'émission SOS mécanique française. 😂😅
Most people would not look at this mess and think, "Oh yeah, I can fix that."
Indeed, repairing damaged vehicles, especially those with significant structural issues, can be a daunting task. It requires a combination of technical expertise, experience, and meticulous attention to detail. While some may feel intimidated by the extent of the damage, skilled technicians can often assess the situation and develop effective repair strategies.
No safety glass or protector when welding.
WITH A FRONT END DAMAGE THEY SHOULD OF REPLACED THE FRONT END WITH NEW PARTS OR SECOND HAND OF A REAR COLLISION ONE TO GET A GOOD VEHICLE THE BLOKE IN THE GREEN TOP MADE ME LAUGH WITH EYE PROTECTION ON HIS HEAD NOT USING IT AND SQUINTING HIS EYES HOPING NOTHING WENT IT LOL 😂😂😂
Amazing
I think this is only for RUclips, no way they are making this for resale in my opinion
Hello, your judgment is wrong. This car was sent to be repaired after it had an owner first.
What type of welder are you using?
Hello, we use carbon dioxide gas shielded welding machine
👏👏👏👏👏👏👏👏👏
This car is not anymore safe as the strong structure has pulled to the original shape. Never use old safety structure parts after collision. They all must be renewed. Let’s hope this car will never collide as it doesn’t protect as well as it did.
Shape restoration job - not a strength restoration job, which is now unacceptably low.
Appearance repair does not guarantee the original safety, but it does not mean there is no safety at all. Driving at low speeds will not have much impact.
Once crushed and straightened, these cars offer virtually no protection in a subsequent accident. No thanks.
Esse carro no Brasil, as seguradoras,avaliam como perda total.....esse carro mesmo recuperado, pode sofrer trepidações durante o trajeto...nunca mais será o mesmo
That's a valid concern. While skilled craftsmen like can work wonders in repairing heavily damaged cars, there can be limitations to how much structural integrity can be restored, especially after severe damage.
Nice
It looked bad but only cosmetic
A new clutch costs more than a thousand where I live
Indeed, prices vary greatly in different places.
DEATH TRAP....ditto
nope
You don't need welding glasses if you close your eyes at the right moment . . . . .
Не бита, не крашена)