Sorry brother, the only videos on my channel I have on wiring is the "signal switch relocation" and the "LED headlight install". I might do one on the next bike.
@@missioncapable4658 I like it very much springer, It looks great on vt 600 ;) Very nice tank and exhaust. I want to buy a honda vlx or vt 600, maybe next year :D I want too build a bobber on hardtail and springer. How the engine works? There are no problems with it?
How hard was to convert the neck steam,I’m in the process of building a 05 750 Aero in to something like this and any advice will be appreciated.i already got the carburetor done by TJ and i got the pipes🙄i need some advice with the front Thanks
@@missioncapable4658 what kind of bike did it come from lol my original question was where did you get it from? But I'm also curious if you needed something special to get it to fit?
@@excessivefarce2808 You don't need to make one. Ebay and Amazon both sell Sportster style tanks direct bolt on for the Shadow VLX under $200 or you can get an even nicer one from TJ Brutal for around $300 on sale.
@@whichgodofthousandsmeansno5306 picked one of the ebay ones up actually, was worried about quality cause they are all from China. Have been pleasantly surprised. I love TJBC but his tanks are a little steep for my budget, being that I got a Honda because I couldn’t afford a harley
Back in 2020... Some parts I got from motorcycle swap meet, Craigslist and ebay. Machine work $100 an hr. Front end around $1,000 Rear disk conversion $700. Misc parts like taillight, fuel tank, jocky shifter, exhaust pipes, $900. Total $2700 Labor done myself $0
Correct... Frame is cut, Fl plate. 5,000 miles and no structural catastrophic failure yet. I'll post a video if any. Japanese ingenuity overkill on stock frame.
@@Covert_Op That is correct. I own 2 of them, both cut. No issues. I even took out the mono shock and replaced them with a solid bar to go full hardtail. That section cut out is indeed nothing but the stock rear fender support.
The chain for the brakes instead of a cable is badass
Did you have to weld the chain together?
I like the taper cut under the seat. Really trims that area down allowing for a cleaner look. Nice job
Thanks brother. I also think it looks better than the straight chop everyone else does. Ride safe 🤙
Sweet looking bike
Thanks brother 🤙
👍👍
見てくれてありがとう
cool.💯
Bro sick bike
Thanks. Check out the latest video on the brass grips and 8" Z bar install
คันเบรคและที่วางเท้าเป็นความคิดที่ดี
ดนตรีเพราะมาก
ฉันขอโทษฉันพูดภาษาไทยไม่ได้ ฉันใช้ Google แปลภาษาอังกฤษ ขอบคุณ.
Now that's a fucking bike man bad ass!
Thanks brother 🤙
Can you do a video on the wiring you did? smooth AF
Sorry brother, the only videos on my channel I have on wiring is the "signal switch relocation" and the "LED headlight install". I might do one on the next bike.
Very Nice! ;)
Thanks brother 🤙
@@missioncapable4658 I like it very much springer, It looks great on vt 600 ;) Very nice tank and exhaust. I want to buy a honda vlx or vt 600, maybe next year :D I want too build a bobber on hardtail and springer. How the engine works? There are no problems with it?
@@DjSharpey666 yes, the vt600 is a good bike to chop. Engine is reliable and runs great. Good luck with your build👍
@@missioncapable4658 Thanks and waiting for more videos with bike ;)
Do video springer front end, brakes set up. Where you got all parts thanks
That's a good idea. I think I might do it. Thanks 🤙
What size is that front end springer and where did you get it from? Been looking for one for my shadow
It's a -4 under Moto Iron from TC Bros. Was for a Sportster converted to fit the Honda.
Dang!!
Badass.
Where did you get the Springer kit?
Thanks for the comment. It was a TC Bros 4 under springer for a Harley converted the neck stem to the Honda.
How hard was to convert the neck steam,I’m in the process of building a 05 750 Aero in to something like this and any advice will be appreciated.i already got the carburetor done by TJ and i got the pipes🙄i need some advice with the front
Thanks
Where did you get the rear wheel?
Amazon... it's Shinko 777 size 180 55 R18
@@missioncapable4658 that's the tire size. The spoke wheel for the rear, or rather the rim I guess.
@@xsinx6577 the spoke wheel is 18x5.5
@@missioncapable4658 what kind of bike did it come from lol my original question was where did you get it from? But I'm also curious if you needed something special to get it to fit?
@@xsinx6577 I did a video on disk brake conversion. Look up "Honda Shadow disk brake conversion"
did you fab the tank yourself?
The tank was made for a sportster. I welded the tabs to fit the Shadow frame.
@@missioncapable4658 would you make a raw one for mine? I can pay hahaha
@@excessivefarce2808 You don't need to make one. Ebay and Amazon both sell Sportster style tanks direct bolt on for the Shadow VLX under $200 or you can get an even nicer one from TJ Brutal for around $300 on sale.
@@whichgodofthousandsmeansno5306 picked one of the ebay ones up actually, was worried about quality cause they are all from China. Have been pleasantly surprised. I love TJBC but his tanks are a little steep for my budget, being that I got a Honda because I couldn’t afford a harley
What do you have invested in the whole bike?
Back in 2020...
Some parts I got from motorcycle swap meet, Craigslist and ebay.
Machine work $100 an hr.
Front end around $1,000
Rear disk conversion $700. Misc parts like taillight, fuel tank, jocky shifter, exhaust pipes, $900.
Total $2700
Labor done myself $0
Damn what rear end swap is that?
It's a 18x5.5 harley wheel. Custom made sprocket made to use a Shadow chain
You cut the frame without adding any supports ? Sketchyyy but I think I seen a Florida plate so don’t gotta worry about inspection 😭
Correct... Frame is cut, Fl plate. 5,000 miles and no structural catastrophic failure yet. I'll post a video if any. Japanese ingenuity overkill on stock frame.
What was cut was only for the rear fender. Doesn't affect support
@@Covert_Op That is correct. I own 2 of them, both cut. No issues. I even took out the mono shock and replaced them with a solid bar to go full hardtail. That section cut out is indeed nothing but the stock rear fender support.
@@whichgodofthousandsmeansno5306 exactly. Mine is done the same way with zero issues as well. I also hardtailed mine as well and lowered slightly
What front end?
It's a four under springer for a harley davidson. It's been awhile but I think I got it from TC bros.
@@missioncapable4658 they don't carry it anymore
@@ronniefrutschi2011 try throttle addiction
Ok Dude.
i need your video without music!
please send me the video again without music and
with the sound of your video.
What's your email?
@@missioncapable4658 send to my Facebook
Uuuu ua a a a.
🤘