Great video. Just to add a troubleshooting tip to the DIY guys. I did a bump test on my pumps before I ordered anything. Unplug the pumps and make yourself a jumper cable so that you can test it by using the battery. Just a short bump test to see if it spins. One of my pumps worked and when I tested the other one, it didn't work.
Try tying some sewing thread to the 4 bolts that attach to the valve body. If you drop a bolt, retrieve it with the thread. Magnetic retriever is not needed.
Thanks for the video. I have 2013 4.6 v8 tundra. I have a p0412 code. I can't tell which part is bad. Is it the ones under the fender or under the manifold?
Great video!! Great workmanship!! Now as far as the passenger side valve, could we not dismantle the tube that attaches (2 bolts) to the exhaust manifold? On the snorkel, I have made an attachment that plugs to the existing tubes. No moisture or junk can ever enter. Do you still have the 2 bad pumps and the valves? If yes I’d like to experiment with them if you could mail them to me please and of course I’ll gladly pay for the postage. Happy holidays & best regards.
Hey, I also took down the pumps and found the top caps with inlet hose was cracked. I was wondering if you still have your old pumps. If yes would you be willing to mail me the caps? Of course I’ll be glad to pay the shipping. Kindly let me know. Thanks,
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Great video. Just to add a troubleshooting tip to the DIY guys. I did a bump test on my pumps before I ordered anything. Unplug the pumps and make yourself a jumper cable so that you can test it by using the battery. Just a short bump test to see if it spins. One of my pumps worked and when I tested the other one, it didn't work.
Great video !! Thank you so much,I'm doing the samething one of this days
Try tying some sewing thread to the 4 bolts that attach to the valve body. If you drop a bolt, retrieve it with the thread. Magnetic retriever is not needed.
Which gaskets did you replace along this process? Need to order oarts right now and dont wanna forget anything. Thx!! Great video 🙌
Sheizes got my like. Thanks!
Plastic body panel kit bought at a auto parts store or Eastwood wil help with that
Like a panel popper or clip remover?
@@krisbuchowicz yes like a door panel remover Eastwood selle it and they also sell it in metal
@@krisbuchowicz
@@krisbuchowicz yes like a panel popper
@@DJMIKE42 I’ve tried panel poppers and clip removers however I have no luck. Either it breaks or just slips through
Thanks for the video. I have 2013 4.6 v8 tundra. I have a p0412 code. I can't tell which part is bad. Is it the ones under the fender or under the manifold?
Youll have to look. Its not invisible. Just climb up and peek behind or crawl under and check.
Great video!! Great workmanship!!
Now as far as the passenger side valve, could we not dismantle the tube that attaches (2 bolts) to the exhaust manifold?
On the snorkel, I have made an attachment that plugs to the existing tubes. No moisture or junk can ever enter.
Do you still have the 2 bad pumps and the valves? If yes I’d like to experiment with them if you could mail them to me please and of course I’ll gladly pay for the postage.
Happy holidays
& best regards.
Hey, I also took down the pumps and found the top caps with inlet hose was cracked. I was wondering if you still have your old pumps. If yes would you be willing to mail me the caps? Of course I’ll be glad to pay the shipping.
Kindly let me know.
Thanks,
Your amazing
Where can I find the air pump snorkel?
Is it needed?