Hope you've got the patience mate. I'm going through this at the moment and also adding a raptor body kit and all I can say is, I am in way over my head lol. I started buying the parts over a month ago and am still trying to get my hands on a px2 bonnet. One arrived a couple weeks ago but it looked like it's been dropped during freight and the freight company won't take any responsibility for the damage. Have taken the bonnet to a panel beaters and he reckons it's beyond repair unfortunately.
I love your ingenuity - 1000 points out of 10 You have done the project I had been considered for years, and so easily. Glad you found that headlight bracket issue before me ;-) Now your next challenge - PX 3 to NextGen Ranger front end - yes I know, that one is a bit more of a challenge.
Great to see someone do this. Maybe you can do a Falcon FG to FGX conversion next. Took me a few months to work out that they were both the exact same body underneath. Although, I prefer the FG compared to the later FGX. Maybe someone might convert a newer one to look like the older one.
Test any wires you join rather than just relying on a colour match. We stuck a PX1 sports bar on a PX2 and plugged in the brake light connector on the left hand side just inside the tub. When it didn't work I traced the wires back and found that, even though the plug and wire colours were the same, Ford had changed the wiring layout between a PX1 & 2 (purple wasn't lining up with the corresponding purple inside the plug and socket) A quick diversion and it was finally up and running.
Gday mate, love your videos, very well made and good content! Wondering if you were able to get an image from the front of the car without the bullbar blocking the view, just to see how the PX1 bonnet lines up with the PX2 grille
I would lose this bull bar so that the aesthetics are not impeded. You can do more with no bull bar or a different type that allows for a full bumper. But on second thoughts, i guess for your front clearance you require no bumper.
A question, Ive juc finished my conversion but my Low beam go off when i turn my high beams on and i see it did the same on yours , how can I solve this 😢😢, pls Help
Авто/Мото
I have wanted to do this conversion since I got my px1. Now I see how simple and easy it is. Will start scouring for the parts I need.
Hope you've got the patience mate. I'm going through this at the moment and also adding a raptor body kit and all I can say is, I am in way over my head lol. I started buying the parts over a month ago and am still trying to get my hands on a px2 bonnet. One arrived a couple weeks ago but it looked like it's been dropped during freight and the freight company won't take any responsibility for the damage. Have taken the bonnet to a panel beaters and he reckons it's beyond repair unfortunately.
@@j_edwards6075 I plan on keeping the px1 bonnet for now.
@@kentweyers1845 Good idea man 🤙
I've also wounded the same thing and I'll be doing the same
I love your ingenuity - 1000 points out of 10
You have done the project I had been considered for years, and so easily. Glad you found that headlight bracket issue before me ;-)
Now your next challenge - PX 3 to NextGen Ranger front end - yes I know, that one is a bit more of a challenge.
Next Gen Ranger is ugly though why would you do that?
Stoked to have this come up on my feed. Been wanting to do this for a while now so might start collecting some bits and pieces
I am going to convert my px1 to a px2 with the Mustang type headlights,it worths every penny
Hi, I just did the facelift on my px1 to px3. Thanks for all the info in your video mate. Awesome helped me to get mine done. 🍻😊
Great to see someone do this. Maybe you can do a Falcon FG to FGX conversion next. Took me a few months to work out that they were both the exact same body underneath. Although, I prefer the FG compared to the later FGX. Maybe someone might convert a newer one to look like the older one.
FG XR headlights with FGX rear end...
@@zaamuro8408 Great idea.
Well made video. Very interesting and a good result!
Thats awesome! Nicely done, I might give this a crack myself. Does look good
You’re the man bro. Just ordered me one of eBay🤝
Great stuff! Love the verses too 👍
thought about making a EGR and manifold cleaning video???
You make it look so easy 🤔 👍👍 thank you
You just made my day
could you tell me is there any difference for installing a px2 bullbat onto a px3
Loved it bro but put the px2 bonnet cuz you have it so why not
thank you! i was wondering if this was possible to do… now i know how easy it is i’ll definitely do it
Test any wires you join rather than just relying on a colour match. We stuck a PX1 sports bar on a PX2 and plugged in the brake light connector on the left hand side just inside the tub. When it didn't work I traced the wires back and found that, even though the plug and wire colours were the same, Ford had changed the wiring layout between a PX1 & 2 (purple wasn't lining up with the corresponding purple inside the plug and socket) A quick diversion and it was finally up and running.
@@xj358 cheers for the heads up! I’m mechanical minded and have a good idea when it comes to electronics, should be able to sort any issues
Great work!!
Looks good!😊
Came up good 👍🏼
Great conversion!!!
Would this work for the single cab?
Gday mate, love your videos, very well made and good content! Wondering if you were able to get an image from the front of the car without the bullbar blocking the view, just to see how the PX1 bonnet lines up with the PX2 grille
the bullbar preety much blocks the line , if your a perfectionist go the px2 bonnet
I would lose this bull bar so that the aesthetics are not impeded. You can do more with no bull bar or a different type that allows for a full bumper. But on second thoughts, i guess for your front clearance you require no bumper.
Hey mate. Do you have a run down on the removal of the factory bullbar?
Would you need anything extra if you didn’t have bull bar and you put the bumper on?
i would say just bumper & maybe a px2 bumper support, not sure if the px1 & px2 bumper supports are the same
A question, Ive juc finished my conversion but my Low beam go off when i turn my high beams on and i see it did the same on yours , how can I solve this 😢😢, pls Help
Hello! How did you go about measuring where you were gonna cut the px2/3 bumper?
Can you get a front winch on that bullbar?
not that i know of
Did the flares for the px1 fit onto the px3 guards or did you get new flares
same flares, fitted fine
What's the steel bumper called
If you look up some Thai Workshops they converted a px1 into a F150
Awesome 🤠🤠🤠🤠
Has anyone tried this with px3headlights/ daytime running lights?
Great video mate 👍 What colour guards did you use, I thought px1 were cool white and px2 frozen white? Cheers
px2 xls base models are cool white i think
Would raptor guards go on px1 2014
What did you do with your left over PX parts? Would people buy them if you were to put them on gumtree?
i sold them all on market place, they sold preety quickly
Do you have to change the guards if you wanna just swap lights?
yes
Hi mate do u have to run a px2 bullbar when doing a facelift from px1 to px2 cheers
nope
Hey mate where can you get the headlight looms from?
wreckers