GREAT lighting. I was able to complete the pcv hoses, gaskets, and now I have the pcv done and the valve cover gasket done on the other side where I started but couldn't finish because the hoses were brittle!
Great vid, thanks for posting. I'm assuming you're in Calif.? Doing this on the street I'm surprised the Eviro Cops didn't show up complaining about the carp cleaner. I also noticed you were blocking a fire hydrant lmao. I give you tons of credit for doing this in the environment you were in. I live in a small apartment complex where I'm not suppose to work on my car, I do all my work in my parking spot, no complaints.....yet.
Good video man thanks I have been looking for a video like this . But I wish you had a table or a piece of cardboard just hurts seeing it scratch a little.
Thank you so much! Could you please tell me the name of the hose mentioned at 21:24 in the video? I'm referring to the hose that, as mentioned, you shouldn't worry about breaking. This is truly the best video I've found on the subject!!!
Hi, My bmw E83 crankcase vent valve went bad with pressure in engine & blow out my valve cover gasket. Do you think it could have damage any other seals?
hello my name is Alex from Aguascalientes, México I´m having problems with the pipes under the trotle body do you have any video with that procedure? thanks
Hello, Thanks so much for this video as I used it for guidance replacing mine. Found the source of the error codes and got cleared but I noticed I lost MPG? Any ideas or recommendations?
My car is smoking randomly when i give it gas but not at iddle,,,i m not loosing coolant and is not mixing either,it burned a lil bit of oil but hopefully is not leaky valves in the head :( spark plugs are dry to ,you think it may be a cvv problem? I dont see no leaks under the manifold either
I got it fiixed thanks to your video man,, it wats the ccv system ,,no more smoke,rides like new , is been 2 months fixed no issues ,thanks again for the steps brother ,follow my channel and chek my e60
viceeighty eight same problem bro only when I step on it all the way ... I changed so much shit , plugs coils oil oil flush fuel flush fkn you name it ... I think this is the main problem as if it was the rings it would be blowing smoke always .... but it only happens when u step on it as if the breather is blocked .. I’ll change mine and let you guys knowlll
@@Dicecuta Well try that first, we use more specific codes but might as well be the reason, if not next step is purge valve replacement, but it is best to get it diagnosed before replacing parts
@@Zeiten i also got p0444 code on my e60 2004 525i, m54 engine. but when i went for mechanic they ask me to change entire crankcase ventilation, im not sure what should i do, feel like they trying to rip me off! Also the MPG is 17.6, but the EML Disappeared after sometime, Im confused please any suggestions?
Question, the vacuum breather has that rubber piece that you took from the old one and put on the new one. Mine has a couple of cracks in it and I don't know what to do about that. Do you know what part number that would be because I can't find it?
i got p0444 code, but when i went for mechanic they ask me to change entire crankcase ventilation, im not sure what should i do, feel like they trying to rip me off! Also the MPG is 17.6, but the EML Disappeared after sometime, Im confused please any suggestions? Bmw e60 2004. M54 engine 2.5
Thanks for the quick response! I've got most of it done but someone used an impact gun and stripped a lot of the srews. I wish everyone would take the time to do things as throughly as you are in this video. Much appreciate this video! Keep up the good work!
Can pcv cause loss of power at low revs . I checked my DISA and it was coverd in oil also some in my intake manifold . I have a 2003 525i e60 please somebody help
In 2008 ccv built into valve cover also changing valve cover would be a good idea if there are oil leaks(might be just valve cover gasket or valve cover cracked), but at this year ccv usually doesn't cause problems
2006 and 2007 e60 and e61 525i, 530i still have the ccv but it is differs from models 2004-2005 because later models have different engine, since 2008 ccv in its usual form is not present anymore in 528i or 535i models
They have a recall for the PCV Valve. 2006 BMW 525i 2006 BMW 525xi 2006 BMW 530i 2006 BMW 530xi 2006 BMW 530xi Sports Wagon 2006 BMW 325i 2006 BMW 325xi 2006 BMW 325xi Sports Wagon 2006 BMW 330i 2006 BMW 330xi 2006 BMW Z4 3.0i 2006 BMW Z4 3.0si Let their asses fix it. I did..💯
@@Zeitencool. I was letting anyone who doesn't know. They were saying the car can catch on fire even without it running. I'm at the dealership now waiting on them to finish up.
what an awful design. this should be required watching for anyone considering buying one of these if you plan on doing your own work. fyi no other car manufacturers in America or Asia are as messed up to pull an intake. most take an hour tops. this one takes 4, if you know what you're doing.
@@reza_dc2 place a screw driver in the schrader valve on the fuel rail. It looks like a valve stem. This releases the pressure so much fuel won't come out when removing the injectors
I’m about to do mines and this video is so awesome step-by-step clear you ain’t skipped over nothing bolt for bolt I love it
F*#king Genius mate! done my 530i took me about 5 hours but your video saved me hundreds of pounds...thanks very much
GREAT lighting. I was able to complete the pcv hoses, gaskets, and now I have the pcv done and the valve cover gasket done on the other side where I started but couldn't finish because the hoses were brittle!
Great vid, thanks for posting.
I'm assuming you're in Calif.? Doing this on the street I'm surprised the Eviro Cops didn't show up complaining about the carp cleaner. I also noticed you were blocking a fire hydrant lmao. I give you tons of credit for doing this in the environment you were in. I live in a small apartment complex where I'm not suppose to work on my car, I do all my work in my parking spot, no complaints.....yet.
Great video! I just had to so this on my X5 E53. You made it look super easy !!
Thanks so mucho for this video. Step by step on real time👍
Nice video🤙🏽🤙🏻👍🏼. That Honda taking off in the background cracks me up 😆
Good video man thanks I have been looking for a video like this . But I wish you had a table or a piece of cardboard just hurts seeing it scratch a little.
Thanks, nothing really got scratched, i am careful with car parts, plus intake manifold is pretty solid plastic
Very helpful. Thank you.
Thank you so much! Could you please tell me the name of the hose mentioned at 21:24 in the video? I'm referring to the hose that, as mentioned, you shouldn't worry about breaking. This is truly the best video I've found on the subject!!!
Any luck finding the name of that hose?
Great job! Thanks for the video.
I wish I could take mine to you lol! Master of bmw
Gracias por enseñar a arreglar problemas del auto y ahorrar dinero
this guy is great,but now ive decided to sell my 5series
What was the name or part number of the hose you mentioned that was a one time use?
Hi, My bmw E83 crankcase vent valve went bad with pressure in engine & blow out my valve cover gasket. Do you think it could have damage any other seals?
Good job bro
🙌
Good video and good work, it was very interesting. Thank you /////////////////////////
Thank you
////
Do you need to unplug the batery for this job?
I’d recommend it but it’s not absolutely necessary
Hello friend
When the EGR valve is moved, does programming be requested again?
Nothing really needs programming on this car
@@Zeiten
Do you need a car x5 e53 2003.
You know your stuff sir wow!!
I'm talking about m54 e60. Since just did mine couple days ago.
hello my name is Alex from Aguascalientes, México I´m having problems with the pipes under the trotle body do you have any video with that procedure? thanks
Not yet, but as soon as we get a chance we'll shoot it
Do you have a video on the ABS PRESSURE sensor? Open
Hello,
Thanks so much for this video as I used it for guidance replacing mine. Found the source of the error codes and got cleared but I noticed I lost MPG? Any ideas or recommendations?
Diagnostic is in order, retrace your steps make sure everything is plugged in
My car is smoking randomly when i give it gas but not at iddle,,,i m not loosing coolant and is not mixing either,it burned a lil bit of oil but hopefully is not leaky valves in the head :( spark plugs are dry to ,you think it may be a cvv problem? I dont see no leaks under the manifold either
I got it fiixed thanks to your video man,, it wats the ccv system ,,no more smoke,rides like new , is been 2 months fixed no issues ,thanks again for the steps brother ,follow my channel and chek my e60
viceeighty eight same problem bro only when I step on it all the way ... I changed so much shit , plugs coils oil oil flush fuel flush fkn you name it ... I think this is the main problem as if it was the rings it would be blowing smoke always .... but it only happens when u step on it as if the breather is blocked .. I’ll change mine and let you guys knowlll
viceeighty eight it was the ccv especifically what was it explain
Hey, I watch most of your vids. I recently have P0444- 0171 codes popped up in my BMW X5. Any solutions recommend of dyi? Much appreciate!
p0444 is for purge valve, what engine do you have in your x5?
@@Zeiten it's a 2004 x5 3.0l cylinder. For some reasons my fuel tank cap is not click when screw it on. So I order a new cap on Amazon today. Thanks
@@Dicecuta Well try that first, we use more specific codes but might as well be the reason, if not next step is purge valve replacement, but it is best to get it diagnosed before replacing parts
@@Zeiten
i also got p0444 code on my e60 2004 525i, m54 engine. but when i went for mechanic they ask me to change entire crankcase ventilation, im not sure what should i do, feel like they trying to rip me off!
Also the MPG is 17.6, but the EML Disappeared after sometime, Im confused please any suggestions?
Question, the vacuum breather has that rubber piece that you took from the old one and put on the new one. Mine has a couple of cracks in it and I don't know what to do about that. Do you know what part number that would be because I can't find it?
Cracks don’t matter, leave it as it is, there is no part number for it
No part numbers, all it is is a vacuum plug that you can pick up at any parts store. Get a variety pack.
one problem, where the hell is that 16mm nut when the camera goes off that you mention
i got p0444 code, but when i went for mechanic they ask me to change entire crankcase ventilation, im not sure what should i do, feel like they trying to rip me off!
Also the MPG is 17.6, but the EML Disappeared after sometime, Im confused please any suggestions?
Bmw e60 2004. M54 engine 2.5
Just replace purge valve, that’s it, easy and simple thing to do
@@Zeiten
Thank you Mate. 👍👍👍
I didn't catch what product you used to clean the idle control? Was it lubricant or brake cleaner?
Carburetor cleaner or brake cleaner will work the best
Thanks for the quick response! I've got most of it done but someone used an impact gun and stripped a lot of the srews. I wish everyone would take the time to do things as throughly as you are in this video. Much appreciate this video! Keep up the good work!
Thank you
Hello, my car is a 2008 528i bmw and I need to buy a crankcase vent and I can't find it. Can you tell me where I can get it? Thank you
There isn’t one on your car, there is just a pcv valve on valve cover and a 3-way hose connecting valve cover and intake manifold
@@Zeiten that's why I can't find it, thank you very much
Mentioning a torque spec here, and there would make this dyi a gem.
Good job dude, but to replace ccv and all tubes incl. throttle and icv cleaning, no need to remove intake at all.
Iaroslav Grygorash what about bmw 2008 528i
Iaroslav Grygorash my car doesn’t have an oil stick
Thank you!!
Can pcv cause loss of power at low revs . I checked my DISA and it was coverd in oil also some in my intake manifold . I have a 2003 525i e60 please somebody help
Yes it can, can also cause misfire and oil in the intake manifold
Where can I purchase this Pvc valve from
Bro for 2008 bmw 528xi do I need to Change the valve cover or ccv
In 2008 ccv built into valve cover also changing valve cover would be a good idea if there are oil leaks(might be just valve cover gasket or valve cover cracked), but at this year ccv usually doesn't cause problems
Zeiten LLC thank you
Bro is this the same as e60 2006 ? Same shape but is latter models don’t have a Ccv they have a cvv????
2006 and 2007 e60 and e61 525i, 530i still have the ccv but it is differs from models 2004-2005 because later models have different engine, since 2008 ccv in its usual form is not present anymore in 528i or 535i models
Zeiten LLC your right ..
The car that’s in the video has a M54 engine mine has M52
@@Semaj.18272, Yours is actually n52b30
Zeiten LLC n m Frkn confuses me lol .. correct N42 this video was so helpful bro thanx
My 07 had a recall, just haven’t brought it in yet
Como puedo contactarte para que me agas ese jale a mi carro?
Hi how long does this take approximately ? Thanks
depends on your level of experience, if everything goes well i can do this job in 1-2 hours
@@Zeiten Thanks mate
@@telboy19652010 you are welcome
took me almost 4hrs and we were 2 guys not completely experts but not rookies either
They have a recall for the PCV Valve. 2006 BMW 525i
2006 BMW 525xi
2006 BMW 530i
2006 BMW 530xi
2006 BMW 530xi Sports Wagon
2006 BMW 325i
2006 BMW 325xi
2006 BMW 325xi Sports Wagon
2006 BMW 330i
2006 BMW 330xi
2006 BMW Z4 3.0i
2006 BMW Z4 3.0si
Let their asses fix it. I did..💯
Good info, but this is different engine, recall is for n52, the video is about m54
@@Zeitencool. I was letting anyone who doesn't know. They were saying the car can catch on fire even without it running. I'm at the dealership now waiting on them to finish up.
Will this work on a 2007?
No, different engine
I wish my 06 E60 530i had a dipstick for the oil. Lol
What city do you live in ?
Servicing Los Angeles area
@@Zeiten how much would you charge for this job on a 04 e60? inline 6..
thanks
how can i get in contact?
About tab, there is an email
They have recall for pcv valve heater to replace
Symptoms of a bad pcv ?
usually lean running in both banks, can cause misfire, in some severe cases lots of oil burning and smoking from tail pipe
Thank you
Adress please
Where are u located
Servicing Los Angeles area
You are so beautiful ❤️❤️ i like you
what an awful design. this should be required watching for anyone considering buying one of these if you plan on doing your own work. fyi no other car manufacturers in America or Asia are as messed up to pull an intake. most take an hour tops. this one takes 4, if you know what you're doing.
Missing scenes like bleeding fuel.
Sterling Gardner
How do you bleed the fuel ?
@@reza_dc2 place a screw driver in the schrader valve on the fuel rail. It looks like a valve stem. This releases the pressure so much fuel won't come out when removing the injectors
🤦♂️
Too fast..presentation for DIY