You place the red boot inside the chrome clamping housing. Tighten the housing to the throttle body and the shiny metal. You should place a catch can between the pvc and intake.
K&N sells a version like this. At first you think the 2 filters is extra performance, but think about the fact that both filters are right above the exhaust manifolds (headers) and as such they are sucking in nothing but heat. Go with a single intake k&n.
I think you did a great job on installing it and it does look good. There are a few potential issues I would be worried about if I installed this on my vehicle. The first issue would be your sucking in extremely hot air now since the new intake sits directly above the engine. The factory air box already had a well-thought-out location that took cooler air from outside the engine bay. The second issue I see is now you are increasing the volume of air into the vehicle. Yes, that is the point of the new intake system but too much air and your stock fuel injectors can not keep up with the fuel to air ratio. Now you may have installed new injectors and had your computer tuned for the new parts and in that case, you probably gained a small portion of power. However, if you just bolted that on and called it a day I can guarantee you that your vehicle runs much worse than it did prior, and over time you will cause major problems.
Yes your absolutely right I allready adress that on a couple of comments . 😁 I went back to stock allready , I lost 3 mpg . Truck sounded super badass while I ran this but it had to go. I will be replacing it with a better cold air intake with a heat shield , video coming soon!
@@stickytarmacs Awesome! Remember to take the hater's comments with a grain of salt. No matter what you post you'll always have people who will have nothing but negative things to say. But on the other side, you have people that are very smart and give great advice on what you're doing. Keep up the good work. I'll make sure to smash the subscribe button and hit the like on all your videos.
Yeah this intake set up was crap . I got a new one I'll film a video on soon . It's a better intake with a bigger filter . Works way better and sounds badass
Completely honest it’s not that good . It sounds awesome and makes the exhaust sounds really good specially if it’s an aftermarket exhaust , but as far as performance it’s not good because it sits right on top of the motor so it gets nothing but hot air! I’m about to remove it and go back to stock because I daily drive my truck and fuel economy is terrible lol
I’m sure the other intakes that they make for the 4.7 that have the filter sit to the left side of the motor where the original air box would be would work great but this one sucks up a lot of hot air ..
Hmm unless your taking it to get tuned properly naa it doesn't matter , but everyone is entitled their own opinion . But from my experiences as of now ( going on 8 different intakes different vehicles of course ) it really don't matter cheap works and sounds just as good as expensive brand
@@stickytarmacs you're* jk lol But for real yeah I just got a 04 ram 1500 5.7 with 166k on it few days ago so I trying to do research on it and came across this 😅
@@bigbadclan3498 after 3 months of being installed I can say yes! I dropped 2 mpgs so about to go back to original air box . But it does sound awesome especially if you have an exhaust on your truck it makes the motor sounds mean
One thing I did notice about it is I’m getting worse fuel mileage. Not terrible I used to get 11.5 mpg now my gauge reds 10.2 every time I drive. Also I’m pretty sure it’s sucking in a lot of hot air since it’s basically on top of the engine which I’m sure is not good! Besides that my truck screams going down the road 😁 it sounds badass but I still might go back to stock
Yeah terrible mpg get a actual cold air intake that sits where the air box original sits and make sure to have a heat shield on it I got one like that and make this think runs 10 times better . Not this one in the video tho it's junk
@@raulcervantes9086 ohh that is the stock adapter that come with the truck . When u pull off the stock intake it should be there I used that part from the original intake
10/6/21 UPDATE on the cold air intake!! Check out my Instagram for details. I used gold heat reflecting tape to keep the intake cold! Big Surprise!!😎 @STICKYTARMACS_RUclips
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video](http://i.ytimg.com/vi/zxfEiMksZQs/mqdefault.jpg)
Hot air intake, A double Hot air intake.
Super duper hot hot 🥵 intake !!!
Absolutly not cold air. Those breath hot engine air. For it to be cold air, the air is ducted from outside.
Lol this guy
@@toystory45 lol he speaking facts
You place the red boot inside the chrome clamping housing. Tighten the housing to the throttle body and the shiny metal. You should place a catch can between the pvc and intake.
Catch can video coming soon going with a. Super cheap Amazon one just the see if it's worth the money
K&N sells a version like this. At first you think the 2 filters is extra performance, but think about the fact that both filters are right above the exhaust manifolds (headers) and as such they are sucking in nothing but heat. Go with a single intake k&n.
Nice video . first one ive seen of this intake . looks awesome
I think you did a great job on installing it and it does look good. There are a few potential issues I would be worried about if I installed this on my vehicle. The first issue would be your sucking in extremely hot air now since the new intake sits directly above the engine. The factory air box already had a well-thought-out location that took cooler air from outside the engine bay. The second issue I see is now you are increasing the volume of air into the vehicle. Yes, that is the point of the new intake system but too much air and your stock fuel injectors can not keep up with the fuel to air ratio. Now you may have installed new injectors and had your computer tuned for the new parts and in that case, you probably gained a small portion of power. However, if you just bolted that on and called it a day I can guarantee you that your vehicle runs much worse than it did prior, and over time you will cause major problems.
Yes your absolutely right I allready adress that on a couple of comments . 😁 I went back to stock allready , I lost 3 mpg . Truck sounded super badass while I ran this but it had to go. I will be replacing it with a better cold air intake with a heat shield , video coming soon!
@@stickytarmacs Awesome! Remember to take the hater's comments with a grain of salt. No matter what you post you'll always have people who will have nothing but negative things to say. But on the other side, you have people that are very smart and give great advice on what you're doing. Keep up the good work. I'll make sure to smash the subscribe button and hit the like on all your videos.
Absolutely! Thanks for watching 😁
Love the love comment cuz I also learned and I was about to buy one of this intakes 2/25/23
Thank you for making this video and the advice. Do you feel any difference in acceleration?
It would probably work better if you had a Ram air hood
Yeah this intake set up was crap . I got a new one I'll film a video on soon . It's a better intake with a bigger filter . Works way better and sounds badass
Drugs are bad .. The affects are endless ..
Shut yo ass up
Nice ima get me one asap.
Ever think of extending the tubes to the wheel well?
I allready switch to a different intake this one was terrible. Don’t buy it unless you want to lose mpgs
My sensor is on the whole other side how do i put it in if its in the whole other side ?
🔥🔥
I know it's been 7 months since she posted this video how are you liking this intake? I'm considering buying one for my 4.7
Completely honest it’s not that good . It sounds awesome and makes the exhaust sounds really good specially if it’s an aftermarket exhaust , but as far as performance it’s not good because it sits right on top of the motor so it gets nothing but hot air! I’m about to remove it and go back to stock because I daily drive my truck and fuel economy is terrible lol
I’m sure the other intakes that they make for the 4.7 that have the filter sit to the left side of the motor where the original air box would be would work great but this one sucks up a lot of hot air ..
Was your check engine light on before you installed this?
No
All you getting is engine hot air sure looks nice but stock works better
Yeah I allready fixed it
Hello, what is the name of the part or adapter where you bought it?
Does it work for the 3.7?
Yes!
I just bought one for my Dodge Nitro 3.7L
@Djankhra nice dude, you should post when you have your setup
Looks awesome. How does it preform?
😞 terrible
Hey man, what happened to the SE-R?
Sold it to some kid. And I’ve heard on Facebook it’s been sold again so idk at this point
@@stickytarmacs Ahh, that sucks man, any reasons why you sold it,
@@walthermartinez9096 moved on to different projects.
Do u know if that would fit the 5.9 magnum? Or what is the diameter of the 4.7 neck?
Go with something different man I removed this after a month it's terrible and sucks in nothing but hot air
@@stickytarmacs my hood has to openings where those filters would meet perfectly
#trokiando #elcuhh #ramgang #jerrytweek #mudtires #mexicanmemes #supercharger
#noquema #takuache #noquemacuhh
#sub4subyoutube #youtubetrucking
#trucksofyoutube #12inkickers #trokiandocuhh #kickeraudio #12insubs #caraudio #trokiando_cuh #soundsystem #truckbuild #americanforces #offroading #texastrucks #liftedtrucks #takuaches
Cool
I’m thinking of buying a cold air intake kit like this then finding a K&N or name brand filter. Do you think that’ll workout?
Get cheap they work the same
Your just paying for the name brand
Hmm unless your taking it to get tuned properly naa it doesn't matter , but everyone is entitled their own opinion . But from my experiences as of now ( going on 8 different intakes different vehicles of course ) it really don't matter cheap works and sounds just as good as expensive brand
Line up trucks ?? 🤣😂 calm down speed racer your talking about racing some Dodge Ram with 4.7s ?? Yeah you definitely know what your talking about
🤣😂 ok speed racer you have a wonderful day
Naw... that'll hurt your performance my dude... heat rises and heat will definitely be sucked into that intake.....
Your late
@@stickytarmacs you're* jk lol
But for real yeah I just got a 04 ram 1500 5.7 with 166k on it few days ago so I trying to do research on it and came across this 😅
@@jackalbytenpc5946 that's funny I just bought another ram it's a 06 with the 5.7 hemi as well
@@stickytarmacs I was a small car guy then I seen this truck and I fell in love... now maintenance and tires is a whole new world of price for me 😭
Will it fit on a 4.7
Yes i put it on my 4.7 in the video
Hot air intake
Lol yeah it’s hot hot
@@stickytarmacs does it make it worse being hot?
@@bigbadclan3498 after 3 months of being installed I can say yes! I dropped 2 mpgs so about to go back to original air box . But it does sound awesome especially if you have an exhaust on your truck it makes the motor sounds mean
@@bigbadclan3498 yeah man I did this to my truck and saw terrible gas mileage.
What was your check engine light for
Tilt it at an angle to get sum slack on the wires
I ended up doing that it sits a lil slanted but it’s no big deal .
One thing I did notice about it is I’m getting worse fuel mileage. Not terrible I used to get 11.5 mpg now my gauge reds 10.2 every time I drive.
Also I’m pretty sure it’s sucking in a lot of hot air since it’s basically on top of the engine which I’m sure is not good!
Besides that my truck screams going down the road 😁 it sounds badass but I still might go back to stock
Any difference in mpg?
Yeah terrible mpg get a actual cold air intake that sits where the air box original sits and make sure to have a heat shield on it I got one like that and make this think runs 10 times better . Not this one in the video tho it's junk
Rather get the kn cone
Yeah I still might as of right now Jan/22 I went back to stock intake since this one was a bust
Hello, what is the name of the part or adapter where you bought it?
I'll send it soon it was from Amazon
@@stickytarmacs I ask the black adapter that you connected to the throttle body to the air tube.
@@raulcervantes9086 ohh that is the stock adapter that come with the truck . When u pull off the stock intake it should be there I used that part from the original intake
I already removed the original It only has the plastic box
Oh well idk man mine had a black cupler on it
What exsuast u have omg
10/6/21 UPDATE on the cold air intake!! Check out my Instagram for details. I used gold heat reflecting tape to keep the intake cold! Big Surprise!!😎 @STICKYTARMACS_RUclips