Moza R9 on desk, CS wheel, SR-P pedals.
HTML-код
- Опубликовано: 8 сен 2024
- Assetto Corsa, Silverstone.
Not enough space for a rig so this is perfectly functional. Moza R9 direct drive, Moza CS wheel, Moza SR-P pedals. Unedited video of a couple of laps trying to tame the FW19. Great fun trying to learn different cars in Assetto Corsa using direct drive.
VRC modding team Williams FW19, 1997
Skin, 3_Villeneuve_R09. Jacques Villeneuve, team Rothmans Williams Renault
Car available here - www.vrc-moddin...
Pedals are mounted to wood and pressed against the wall
I love honesty. Its hard to find a decent review when everyone just wants to show off the other $90,000 components they have. Appreciate your video!
In all seriousness, this is the best video I've seen re ordinary home sim racing. Straight to the point and it answers all questions on use perfectly clearly, evidentially.
Thanks for the feedback. I’ve got a couple more on the same desk playing Dirt Rally 2.
Also, pushing the desk right against the wall (but not drilled to wall) has reduced monitor shake a bit
@@guest21984 Good idea. Can I ask where you got your desk from? (I've also been wondering about bracketing a desk to my wall.)
@@eddiedevereoxford4995 Its the 160cm x 80cm ‘Office Hippo Heavy Duty Rectangular Cantilever Office Desk’ bought from Amazon
@@guest21984 I've got that same desk supporting my triple 27 inch monitors. All I need is a spare £1,000 for a DD wheel. Now I've seen that the desk can cope, I'll have to start saving.😃
@@guest21984 Go VR. Its not just the immersion skyrockets with it. Its also that especially in Dirt Rally 2.0 you will improve your skill because especially in Dirt its so much easier to estimate speeds, braking distances and so on. Also narrow Locations like Argentina or Greece are a lot less claustrophobic to drive in VR. It looks wider and so you get a much better precision. Also when you drift that you can with VR still look straight instead of the camera following the car is a big advantage as well.
VR is really a game changer!
Looks solid! I've been simming for a little over a year now with a G29, been very happy with it, and I've started doing some research on my first upgrade to some proper gear and the Moza R9, CS wheel and SR-P pedals are so far top of the list for me. Was looking at the Fanatec DD Pro before but the Moza package is definitely more appealing now
There's also the Moza R5 Bundle now for £569. But this is 3.5Nm less, no load cell and smaller wheel. The R9, CS and SR-P I think was a good middle ground
@@guest21984 I think the R5 is a little too weak for what I'm looking for. R9 is perfect but the quality issues are concerning
@@The_18th_Fret No issues at all with my R9, CS & SR-P. I guess there will be QC issues with a few units but its just a case of returning them to your local distributor if they’re faulty, then get it replaced
Thank you so much for this video, it answered a lot of questions for me regarding mounting the wheelbase to the desk, and how will it perform!
All the best!
Thanks for the video. Good to see that it’s possible to enjoy DD with a desk setup. What pedals are you using, What kind of chair are you using?
What wheel/pedal setup were you using before?
Nice SMP btw.
Thanks. Pedals are Moza SR-P.
Chair is this one - i.imgur.com/YjQonxs.jpg
Pedals before work Logitech G27
Such a nice piece of kit.
I bolted my desk to the studs in the wall behind it. It's sturdier than many rigs, and the monitor doesn't move at all. This is with a Fanatec 8 Nm.
Thanks. Interesting, do you have a photo it bolted to the wall? Do you have a monitor base or arm? Mine is now on a monitor arm so swings out and saves space
Real good, straight up vid. Nice 1, even if you were seated as if driving a tractor! Lol 👍❤
Man thank you! Was trying to find similar vid
There's a couple others on my channel showing Dirt rally 2.0. I might make another of AC or Dirt 2.0 now as im using a monitor arm instead of a stand
@@guest21984 i was worried about r9 being horrifically forced that'll break my desk, so was gunna opt to r5. btw where did you get the table？
@@Trumpoli It's not for a 160cm desk. The desk is from Amazon, search for Office-Hippo-Professional-Cantilever-White 160cm. RUclips probably wont allow the link
@@guest21984 cheers
Waaa! Please post more videos like this! Especially with F1/LMPs cars!!
Hi, great to see your vid as that's what I wanna do as well. Would you mind telling me how you fixated the load cell pedals? Or did you not do that at all and simply have them lie flat on the ground? :)
Pedals are screwed to solid pine with MDF over the top and pushed against the wall.
the monitor seemed to shake a bit but I was expecting worse tbf considering you're using a wheel base with such power
It’s got more power when needed. I clipped a rock in BeamNg Drive rallying which snapped the axel and broke the front wheel completely off. That was a violent shake of the desk and my monitor did a little hop :D It seemed correct for the damage though
@@guest21984 man you need a proper sim rig/cockpit than just a table 😂😂
@@rehannoor4961 feel free to buy me a bigger house with a extra room so i can fit one! 👍🏻 (and another pc and monitor because I use my pc for work and non racing games too)
@@guest21984 it's doable in a small space, I live in a one bedroom apartment and have a cockpit setup while using my one main PC (no need for 2) and TV
@@guest21984 if you wall mount the monitor you can eliminate the screen shaking completely, which is much more annoying then the table moving.
If you get one of the extendable monitor arms that mount on the wall it's easier to move back for regular use aswell.
Good stuff. Check out the videos on the site of the wheel rims. I have a video of the Turn racing 305 and SRB wheel for the CS hub. Will give you options for the CS wheel.
thx for that video !
Solid driving and improvement!
Nice video. Does your desktop have metallic bars crossing from left to right? Or is it standing only on the edges?
How do you secure your brakes without a rig? I am trying to figure out that problem right now! Just got my Moza gear :D
Pedals are mounted to wood (screwed into wood) and pushed up against the wall.
@@guest21984 you're awesome, thank you! :))
Just waiting for that console support since I race on PC and console.
very good 👍
would like to know the height of the clamp’s bottom part (the big screw after locked on table)🙏🏻
Sorry, I no longer have the setup. I sold it all over a year ago.
are you using full force feedback? I see you're on a desk, I'm shocked at how stable it looks. I have a standing desk and I just dont know if it can handle the ffb lol
Yes, that was full ffb. Depends how stable/solid the desk is I guess
Question.. I just got the exact same setup and about 3 days in my SRP wheels are making excessive squeaking noises accelerating and letting off gas pedal.. have you or anyone experienced this? If so, any fixes?
that thing has a torque to flip a house. how your table is still alive 😂
Are your pedals mounted to smthin or what?
Yes, mounted to a wooden board which is pressed against the wall
thx for the video
Hello, does it wobble the table a lot? Or is there a possibility of causing damage to the table? What is the FFb percentage?
Hi, the table wobbles a bit but not a lot. No, no damage unless it wasnt mounted properly.
R9 - 9Nm, it was on max.
Good!! Do you have the link for the DD brackets (to fix on desk) ?
Sure - www.gtomega.co.uk/products/r9-table-clamp
That desk clamp is too long , tbh I'd get a dremel on that and shorten it out , I brought the r5 srp pedals (not light) , es wheel and mounting plate as separates, only £69 more than the r5 bundle and the peddles are much better than the lite version. I use it with an xrocker frame and chair that has in built speaker with vibration £80 on fb market place very happy with the overall setup, in short avoid the r5 bundle get it separate with the proper srp pedals , or spend a bit extra for the r9
Thanks for your concern, the clamp however was perfectly fine. I've now sold the entire setup and the buyer had no problem with the clamp.
Nice. I like.
good keyboard😀
Thanks. Yep, it is. Let me know how the modern ones are going in 27 years (It was from 1996)
Questions: do you have something holding behind the chair? Or is the srp brake pedal soft enough not to push the whole chair back while braking?
Depends my chair has wheel so I get pushed back quite often
How’s the reliability been with this setup? Any disconnection problems?
All good, no disconnects so far
How many degrees of rotation have the wheel base with the f1 car? Good smooth drive ;)
I think you can set the rotation within the base's software
F1 wheels are 360°
How long have you had the R9 for? Any known problems? I'm thinking of getting one
Purchased in July 2022, no issues yet :)
How inconvenient is it to switch between sim and regular desk top or keyboard and mouse games
Depends if you want/need all your space back. I just moved the base to the side, placed the wheel on my desktop and flipped the pedals and board upright under my desk. It took around a minute to move it all
I also want to mount on my desk, the pedals with load cells, do not rise?
No, they’re screwed to wood
Feel any notchyness from the motor due to the magnets?
I don’t have it anymore but it was really smooth, no notchyness at all
Hi, I know you already sold your rig but do you have the dimensions for the pedal mount and what wood they are?
Hi, i dont have the rig or mount any more but it was two heavy solid pine posts from a bed frame with a sheet of mdf over the top. The pedals were screwed to the mdf.
Is the mdf also screwed to the pine posts?
@@chloeprice7978 Yep, it was. All taken apart now because it was quite big and heavy.
So what do you think of it so far? I want to get one (dd)
I have a thrustmaster force feedback. Is this setup far better improvement? If so I think I may go with this setup. I don’t have a crazy rig or anything but I do have a stand that holds my wheel and foot pegs but I think a better setup will help me for sure
Depends. What Thrustmaster setup do you have?
@@guest21984 it’s just the $200 version. It’s force feedback though for at local Walmart. It’s the Xbox version one
@@CodyMcDonald89 Then yes, but the R9 is also more than double the cost. I spent close to £1000 on this setup - base unit, wheel, pedals, shifter
@@guest21984 yes I can get the setup for 950$ with taxes here in USA
@@CodyMcDonald89 I wish things were as cheap in UK / Europe
Hey man what NM where you using what are you settings
9Nm and custom settings
how heavy is this desk? I'm finishing a 65lb butcherblock next week but am worried if this torque would be too much for this weight.
Edit, Just realized you're using the r9 with 9nm. I'm thinking of getting the r5 so that'll be less torque.
Easy heavy enough to take the r9. I think the r15 would be fine on it.
Not sure of the weight but its an ‘Office Hippo Heavy Duty Rectangular Cantilever Office, 160cm’ (search and its on Amazon)
That wheel is kinda heavy how was the force feedback with it?
Certainly enough for a desk setup! :)
@@guest21984 I have a rig but with a tmx pro on it lol. Been thinking about upgrading to a moza set.
hello good sir, how do you mount your pedals?
Block of wood against the wall
@@guest21984 solid. Thinking about trying a setup on my desk but was worried how the pedals would work but that sounds quite reasonable haha!
I wish MOZA was on xbox and Ps
What screen size is your monitor?
34”
How did you manage pedals without a rig. Do a vid on it :)
Pedals are screwed to wood. I will later when I get home :)
Here's a vid showing the pedals in use and a photo. Thanks, my first sub! :)
ruclips.net/video/UFVi-dKnYOE/видео.html
@@guest21984 Thanks for the photo! Want to buy R9 with this pedals and try to do the same with wood.
How much force feedback do you have it set to?
100% I’m still not sure if I have the correct settings for Assetto Corsa in the game menu though
How did you lock your chair?
A large bed behind it with the bed against a wall. I think you can see the corner of the bed in the video
Johnny Sins is also a sim racer?
:D I wish!
How did you mount your pedals?
To a block of solid wood then pressed against the wall.
Good dd?
Really good, don’t think I would want anything much stronger on a desk.
I considered the Alpha mini but it was more expensive especially with the Simagic wheel and there’s no official table clamp for the mini. I expect the Moza R9 clamp would work fine though
Your FOV is wrong. Try to use the dashboard fov because you have the monitor close to the wheel.
Yes, I use dash view now and mainly play Dirt Rally 2. There’s a couple of videos on my channel
Hey need help
With?
I pray I'm not racing against deskies...
You’ll have to start praying harder as more of us will be coming when the R5 bundle drops in a few weeks
Good, now go beat minecraft hardcore with this setup
Not impressed with this, seems like a knockoff Fanatec
Buy Fanatec then 🤷♂️
Actually do research they sort of new in the scene and loom at reviews on it it's actually good
@@Wyn3e yeah I seen good and bad ones. I went with Fanatec, can't complain the Fanatec DD works awesome and feels amazing.
@paulb2608 the cheaper dd weels is always out of stock and so is the 3rd party retailers that sell it in the UK so I'm looking at moza
@@Wyn3e good luck brotha