Hey! Thank you for this video. This is the easiest and cheapest technique I have seen before. You said that if you don't use 100%sillicone it will stick to the tray. Even if it sticks will it still work and then maybe I could bin the tray after I have poured the resin?
Hi your welcome 😊 it will work and you can have a tray made its just the silicone will stuck on the sides but there is an option just colour the edges with Gold and cover them.
How long did you wait after adding layers of silicone before you started shaping with your fingers? Mine was too sticky to do it right away and I also worry that a layer of messy silicone will be on the bottom of design near many areas of edge.
@@teaandart I did use dawn dishwashing soap. Maybe it depends on the brand of silicone used or I should wait a bit until it starts to harden a little. Thanks for the reply
No absolutely no reason at all you can make the base with silicone but making it fully smooth is a challenge . The walls can be as higher as you like as well.
Awesome! Thank you for this amazing video, I've heard a lot about using silicone like this to make a mold, but have had a hard time finding a good video and well explained way to make it. Is there a different way to make the base, though? Rather than use the self adhesive liner, can I use saran wrap that is very carefully flattened out? Or just put the silicone on a marble cutting board and leave it as is to re use the mold on? I have a nice marble cutting board I'm never going to use and it's just sitting around. It's quite similar to yours lol
Saran wrap is delicate it will rip easily amd your resin will get on marble so use any pvc plastic like the one you use for tablecloths i am adding reference the one you can use.
Hi the soapy water was for smoothing silicone so it don't stick to hands. @4:20 i use a pvc clear wallpaper on the tile. And in this video i actually used the mould and made a tray. ruclips.net/video/Y--R_FdhfJA/видео.html
Hi i use wood board and then add the Pvc sticking plastic. And the tray comes of easily here is a video of me using one of the mould for tray making. ruclips.net/video/Y--R_FdhfJA/видео.html
Could try a strip of some vinyl edging or something like it. It’s usually bendy and will give round corners. Ask a hardware store for what you need and trying to do and they should have something.👍🏻
This is by no means easy for me, and messy! However, putting the silicone in a piping bag may be the way to go for me…why didn’t I think of that sooner 🤦♀️ you make it look so simple…I wish I had your talent…
@@karenzentgraf7274 www.ebay.co.uk/itm/173825971201 Here is the link other then that you can use clear shower curtains as well. www.ebay.co.uk/itm/163819723797
Sure is! I just made one afyer watching this video about two months ago! I have a shocking memory and at first I couldn't find the video. I had already purchased the products required so that helped a bit but I am amazed at just how easy it was!!! Good luck! x x x
Though I would really like to follow your instructions I can not because your written words are too quick to read. If would help me if you slowed them down or left on the screen longer. Thank you though for your work.
@@salvanoor7755 i have use 100% silicone glue you can find these in barhroom or kitchen supplies shop. Then i use pvc plastic you can use plastic tablecloth as well. And around i use wood glue just to make sure its extra secure.
Like others have said, that was insanely helpful! I feel like I can actually make one and I have not felt that way yet.
Thankyou so much for the positive feed back i am glad this was helpful for you 😊
Totally brilliant, thank you so much for taking the time to share this tutorial. ❤
I can do this, and just saved so much money!!! Thank you!!!!
Your very welcome 😊
Thank you so much! I'm very new to anything resin and just made two molds - so easy! x x x
Ap n ksy bnay ha molds full detail dy skti h ap mujy
This was more helpful than you know. Im going to keep this info tucked away for later projects
Blessings thankyou so much yes its fun and you can make so many shapes as well.
Thanks you for sharing this idea with you, you are so very creative ,may God continue to increase your knowledge
Awesome video. I've wondered if I could use the bathroom silicone. Thanks for posting. Blessings to you.
Thankyou so much.
You can use it but it get stuck to the resin sides.
So easy & inexpensive! Love it.
I love you. You really just saved me a bunch of money.
This is so creative! Thank you for sharing your ideas.
This is very helpful. Thanks
I was wondering what you were going to use that callking gun for in your unboxing video! Looks so simple. Thank you for the video. Many blessings.. 🌿
Thankyou so much ☺ 🌙its simple and easy .
You just saved me so much money and time thank you!!
I am in awe! Thank you!! 🙏🏾
Spectacular, Thanks, for teaching Us, My Best Regards for you and your family
Amazing, thank you
Thank you so much ☺️ 💓 💗
Love it ❤
Thank you ☺️
Wow... Just wow!
Wow, thank you so much for this video so helpful! I'm going to attempt to make one too, where did you get the wood piece from?
Pleaae share what brand silicon you are using. There are so many silicon variants i have yried two my mould is leaking
Awesome, I love the tip about the wood glue to prevent leaks. Do you think hot glue would work?
Thankyou so much i did use glue gun but it sticks with the coaster edges.
One way is you can gild them gold so they can add texture 😊.
@@teaandart thank you so much 😁😁😁
Glue gun wali glue stick hm use kr skty h kya
Hey! Thank you for this video. This is the easiest and cheapest technique I have seen before. You said that if you don't use 100%sillicone it will stick to the tray. Even if it sticks will it still work and then maybe I could bin the tray after I have poured the resin?
Hi your welcome 😊 it will work and you can have a tray made its just the silicone will stuck on the sides but there is an option just colour the edges with Gold and cover them.
@@teaandart thanks!
How long did you wait after adding layers of silicone before you started shaping with your fingers? Mine was too sticky to do it right away and I also worry that a layer of messy silicone will be on the bottom of design near many areas of edge.
Hi I didn't wait make sure your using the dishwashing liquid on your fingers so the silicon won't stick to your fingers.
@@teaandart I did use dawn dishwashing soap. Maybe it depends on the brand of silicone used or I should wait a bit until it starts to harden a little. Thanks for the reply
@@lauraweis are you using 100% silicone dawn soap is not an issue if you wait it will start hardening and its impossible to shape then 💓
Hello mam!!
It's amazing..
But one small request mam.
Could you please name the products name for all products mam?
Pls mam!!
You are just amazing I will try to do and I need to find where I wl get this😊Tq u so much
I am glad you like it and found useful 😊💗
Thank you for this.. Judging from your clothes, I'm sure you are a fellow desi... Hello from Islamabad, Pakistan 🙌
Your very welcome fello friend a warm welcome ☺☺☺ and a big HI from London U.K .
Superb!
Are these moulds like reusable? After i take out my final piece like is that mould now wasted or it can be used for making another ?
These can be use 4-5 times if handle carefully 😊
Is this reusable? I don’t understand… can you pour resin and it will be fine?
What if you don’t have the plastic to put underneath? Can you still do it on the wood and take it off?
That sheet is necessary or the resin will stick to the wood.
So is there any reason you couldn't make the bottom with silicone and make the walls higher to get a reusable mold?
No absolutely no reason at all you can make the base with silicone but making it fully smooth is a challenge .
The walls can be as higher as you like as well.
Hello! Do you use sope only to shape your mold or also so the epoxy doesn't get stuck to the mold?
Hi its just for shaping the silicone not for epoxy.
Gracias por explicarnos como hacerlo. Bendiciones
Is it easy to lift the resin from off the marble once cured?
I would like to know how to make a OM mold keychain size please, or how can I order one from you.
After pouring the resin on that marble geode mould how will u twist n take out ?
Hi this is a complete tutorial on how i made the tray and demoulding it.
ruclips.net/video/Y--R_FdhfJA/видео.html
It's cool, but only for one-time use mold
@@Grimar87 hi Thankyou for your kind feed back i have use this moulds 3 times you just have to carefull thats all 😊
Does the resin stick to the bottom plastic layer? How is it peeling it off?
hi there it works perfectly fine as I have use PVC plastic sheet for the base .
if you search for the tray I made I used one of these molds in it.
@@teaandart thanks! I'm gonna try this this weekend :)
@@celaena7876your very welcome have lots of fun.😊🥰
Can we use white silicon for this instead of transparent
Yes as long as its 100% silicone.
@@teaandart thank you
Omg Thank you
Is this mold reusable?
Can i use plastic wrap underneath or plastic shopper?
Yes you Can use it 3-4 times .Please use plastic that is PVC not the ordinary plastic shoppers.
Awesome! Thank you for this amazing video, I've heard a lot about using silicone like this to make a mold, but have had a hard time finding a good video and well explained way to make it.
Is there a different way to make the base, though? Rather than use the self adhesive liner, can I use saran wrap that is very carefully flattened out? Or just put the silicone on a marble cutting board and leave it as is to re use the mold on? I have a nice marble cutting board I'm never going to use and it's just sitting around. It's quite similar to yours lol
Hi Thankyou So Much for liking the video.
You need a barrier in between the tile and silicone reason being the resin will stick to the marble.
Saran wrap is delicate it will rip easily amd your resin will get on marble so use any pvc plastic like the one you use for tablecloths i am adding reference the one you can use.
www.ebay.co.uk/itm/113860427566
Like this its a necessary step hope you find it useful 😊💗
@@teaandart Ah, alright. Well thank you so much for the information! I appreciate your reply
.. could I use transfer tape used for vinyl for the clear plastic you put down?
As long as it is pvc your plastic should be of pvc table cloth material.
Gotcha
Can silicon sealant can be used for borders
Where can we buy all stuff to make this
How would you make a tray mold with a small lip so things don't easily slide off?
What was the soapy water for? What did you put over the marble tile? @4:20 Where's the finished product?
Hi the soapy water was for smoothing silicone so it don't stick to hands.
@4:20 i use a pvc clear wallpaper on the tile.
And in this video i actually used the mould and made a tray.
ruclips.net/video/Y--R_FdhfJA/видео.html
Which paper or sheet you used
How many times this mold can be used?
1:11 IT ALSO STICK INTO FABRIC? LIKE SPANDEX ? :)
Hi what surface u have used for placing silicone can u tell me and when we do resin art will it come out correctly??
Hi i use wood board and then add the Pvc sticking plastic.
And the tray comes of easily here is a video of me using one of the mould for tray making.
ruclips.net/video/Y--R_FdhfJA/видео.html
Thnku so much ❤️ u r such a nice person such a quick reply u have made a very helpful video as m beginner
@@riyamittal2010 aww bless you a lot i am glad it was helpful for you 😊😊😊😊☺
how do you get more accurate curves and edges? I want to do a pickguard and I would have to be precise
Could try a strip of some vinyl edging or something like it.
It’s usually bendy and will give round corners.
Ask a hardware store for what you need and trying to do and they should have something.👍🏻
Hi. Can I use acrylic sheet instead of PVC?
Hi i am afriad that resin might get stuck to.the acrylic sheet.
@@teaandart thank you for sharing. 💕 Can I use cling wrap instead PVC?
@@irfanafathima8834 if you can get a table cloth the one that are plastic they will.work well but cling film.is very thin it will eventually rip.
@@irfanafathima8834 like these
www.ebay.co.uk/itm/273310610924
@@teaandart thank you very much for sharing this tip 🧡🌼
How long do we need to wait before pouring the resin?
Just give it a day .
Does it matter what kind of wood glue is used?
You can use any wood glue.
Where did you find 100% silicone? I've been looking everywhere online!
Ho where are you located mainly they are sold in hard ware shops where you can find bathroom tiles supplies.
@anila goto Home Depot or Lowe’s or Walmart
What’s this surface on which you are making this?
It's a wood and in between there is a PVC plastic sheets.
*do you use wood adhesive on the outside immediately or after the mold dries?*
When you notice the silicone is curing apply the glue so the next day irs ready to use 😀.
How will you demold the resin tray
I have a resin tray video making there i have demold it .
@@teaandart ya i have seen it ..bt the way u demould it how will it stick again on the plastic to use it again
I m going to make it today just as u shown bt just wondering how i m gonna use it again
@@jahnavisharma8448 you again put it in position then use wood glue on sides again.
Under the mould silicone then Outer side wood glue let it dry completely then pour resin.
Does the silicone harden or stay plyable? Im trying to make it like earplugs. Can anyone offer help?
It do harden but a bit flexible but it dont change its shape on handling.
This is by no means easy for me, and messy! However, putting the silicone in a piping bag may be the way to go for me…why didn’t I think of that sooner 🤦♀️ you make it look so simple…I wish I had your talent…
ايه هي الخامه دي لو سمحتي ال بتعملي بيها الإطار ياريت اجابه؟
🥰😍
💜
What's the name of the paper pls?
Where can I find this plastic wallpaper sticker?
You can them online easily.
www.ebay.co.uk/itm/281045709879 this works as well.
@@teaandart thank you very much 😊 so the plastic will essentially come right off of the resin once it's dried.
Is that plastic the same as clear contact paper?
Its a clear plastic use for wall paper make sure its PVC.
Tea And Art can you send a link or where to buy? Thank you
@@karenzentgraf7274 www.ebay.co.uk/itm/173825971201
Here is the link other then that you can use clear shower curtains as well.
www.ebay.co.uk/itm/163819723797
Where’d you get the PVC paper from? I can’t find it 😩
Hi its available on ebay you can use this as well
www.ebay.co.uk/itm/124183756983
It's in the kitchen section at Walmart for about $6. It'll be right with the contact paper.
Can I use something else that pvc paper?
@@ayael-masriel-najjar8529 you need a pvc plastic otherwise your resin will stick to it .
I didn't understand the last part what is it purpose?
The last part are DIY tray handles that you can make out of Appoxie clay instead of buying you can create your own unique ones.
@@teaandart could you please do a video on making the handles too because this tutorial has been immensely helpful
@@chilkakanika1456 hi Thankyou so much for finding it useful that's actually a brilliant idea i will sure make a tutorial on it 🙂
Is this silicone sealent?
yes
Is this beginner like SUPER beginner brand new never done resin at all friendly?
Yes any one make it i made this first time myself.
Sure is! I just made one afyer watching this video about two months ago! I have a shocking memory and at first I couldn't find the video. I had already purchased the products required so that helped a bit but I am amazed at just how easy it was!!! Good luck! x x x
Ok? Where's the finished piece???
There is a resin tray video tutorial in that i used this diy mould.
Is glue k name kia h
Its use in bathroom or kitchen for sealing tile. Make sure its 100% silicone.You can buy it from bathroom kitchen making shops or hardware store.
@@teaandart name kia h silicone k
@@Weightloss2980 Its Unibond
where can i find that pvc wallpaper
Its available online or in bookshop Supplies store or
Similar to These
www.ebay.co.uk/itm/113860427566
If you can't find the exact.
Can you teach me , mold making
Hi, I have lots of videos on mold making. What are you looking for making molds
@@teaandart I want to make tray , heart , pendant , agate , circle and squar type ,flower and leafs ete
@@teaandart table top 16 and 18, 24 inch also
@@teaandart clock size circle photo frame squar and circle type mold
why don t you show the final product??
Didn't understand the last step (clay)
I cannot understand why ppl don’t have talking in a video. ☹️
Though I would really like to follow your instructions I can not because your written words are too quick to read. If would help me if you slowed them down or left on the screen longer. Thank you though for your work.
Wood glue use
So it gets extra secure any resin leakage avoided if happened.
@@teaandart pvc paper and wood glue only use ... nothing else .. plz guide me..
@@salvanoor7755 i have use 100% silicone glue you can find these in barhroom or kitchen supplies shop.
Then i use pvc plastic you can use plastic tablecloth as well.
And around i use wood glue just to make sure its extra secure.
@@teaandart pvc shet or silicon glue online milti h pakistan m koi link bje dy ...
@@salvanoor7755 try daraaz i don't know any exact links as o am in UK.
Where is the end result geez 😒
If your looking for molds turned in to tray
Here is a video on one of the tray molds used 😀
ruclips.net/video/Y--R_FdhfJA/видео.html
Wow, thank you so much for this video so helpful! I'm going to attempt to make one too, where did you get the wood piece from?