Hi Nadia! This is absolutely gorgeous! I have probably a silly question but after the latex dried and you’re getting ready to top coat it, did you place the tray on lifts for the resin to drip off or let it sit on the mat. The reason I ask is because I put mine on little plastic cups but the tray will bend since it’s not fully cured. I guess I could wait a few days but I was anxious 😬
I love these molds! I noticed tho they’re a little bendy? I’ve made sure my mix is accurate a few times and still the same. I was curious if you had the same issue?
Hey Nadia. Another questions sorry hehe. But what kind of latex is it? I mean is there a specific latex for resin or any latex is okay? And whats the difference between coating / pouring clear resin after demolding and before demolding? Is before demolding easier? I want to learn resin arts so i need more informations. Thank you in advance.
Any liquid latex should be fine! I’ve used a brand ‘meant’ for horror make up and it was the same as any other brand. Top coating out of the mold leaves a nice domed finished, for more info check out my video here: ruclips.net/video/5-VBL4k24ho/видео.html 😊
Room temperature or slightly higher than room temperature is ideal. Blush could be caused by high humidity levels and can be fixed by adding a top coat 😊
It is a beautiful and elegant tray! 😍👍🏼 I had the experience with the color in the edges (gold or silver), they pilled or get scratched very easy, do you have the same experience or not??? I’m thinking that maybe doing the edges before the clear top coat, can be a good idea! I’ll try that! By the way thanks for the tip of the latex, I didn’t have idea about that!
You place the handles in the poured resin which holds the handles. However, when you turned the tray over there appears to be screws going through the underside of the board that would attach to the handles.
Thank you! No, it won’t melt the resin but could leave a small dent. We top coat with a higher heat resistant/protective top coat such as DCS Resin or Honey Resin by Dipon. You can use my code ‘SUMMERGIRL’ to save 10% 😊
Thanks so much for your prompt reply!!! I have a couple of questions: did you add some strokes to make it look this way? I’m in USA and cannot find the honey resin. I’ll try the DCS. Thanks for sharing your beautiful designs!
@@lindac1259 The resin slowly pulls in over time creating striations on its own. If you're in the US, I can also recommend Craft Resin - you can use this link to save 10% :) go.referralcandy.com/share/G537QB2
A low viscosity resin 😊 I highly recommend Dipon (located in EU), you can save 10% with my code ‘summergirl’. If you’re located in the U.S, I can highly recommend Craft Resin, you can save 5% with my link: craftresin-us.refr.cc/summergirlcroatia
Can you write the dimensions? Thickness. And how much resin was used.
This a nice piece …How much Resin did you use for this mold?
U can use any aap for it by giving the length and breath size of the mold
Job Well DONE. Your teaching is the very BEST way to learn how to make a resin tray. You were very clear from beginning to the end, thank you ❤
Black and silver don't normally do it for me but this shimmery set has me rethinking palettes ;) Thank you!
After how much time you put handles
What viscosity resin did you use for this? 😍
Does it dry naturally if you leave it till the next day? I am a beginner and your videos are beautiful. Learning a lot. Thanks so much!
How did you get from 5:09, which is pretty bad to 5:15 which is beautiful? Something pretty drastic happened between those 2 shots.
Very pretty~! I wish I knew the difference of putting the top coat in the mold and the way you did it! First time seeing that.
How much quantity of resin taken while making this tray
OMG this is beyond beautiful!!!New sub here. I’m waiting for my resin and my silicone mold to try something similar to this ❤❤❤❤❤
It's so beautiful
Can you translate to Arabic
Hi Nadia! This is absolutely gorgeous! I have probably a silly question but after the latex dried and you’re getting ready to top coat it, did you place the tray on lifts for the resin to drip off or let it sit on the mat. The reason I ask is because I put mine on little plastic cups but the tray will bend since it’s not fully cured. I guess I could wait a few days but I was anxious 😬
Please what quality marker do you use
Lateks si sürdükten sonra kuruması için verdiğiniz süre ne kadar zaman
STUNNING!! NEW SUBSCRIBER!!
Muazzam bir eser ellerinize emeğinize sağlık teşekkür ediyorum.
Very beautiful. I love it!
Stunningly beautiful! Thank you for sharing your talent, process, and products! 👌
I love these molds! I noticed tho they’re a little bendy? I’ve made sure my mix is accurate a few times and still the same. I was curious if you had the same issue?
This is so beautiful...wow.a question please,the top coat is it a mixture of part A and B?
Здравствуйте, скажите пожалуйста это внутри вы насыпали, камушки с эпоксидной смолы? Спасибо!
Скажите пожалуйста это фламастер специально для эпоксидной смолы?
How much resin did it take to make this very beautiful
Is putting handles like this safe or do we drill them to be safe?
Precioso!!!!, gracias por el tutorial y por la traducción al español, gracias
Is it mica powder that provides this effect? Can the same result be obtained with epoxy pigment?
HI Nadia, WOW really loved the way your Tray turned out thanks for sharing 👍❤️Lin
Thank you Linda! 😊💗
I messaged you on etsy for a set I would in specific colors
Coast ethra
Nice work, what’s the name of the marker please?
Could you please tell me what resin you use for this tray?
Beautiful, im just learning, can't wait till start, im in Ontario Canada
I ❤ watching your videos!
Can we make this with acrylic and mica?? Same effect wil com or not
Mam did u conducting classes for ths
How much resin did you use for this mold
Was the top coat a mixture of part A and B resin please
Beautiful tray Nadia, well done x
Hey Nadia. Another questions sorry hehe. But what kind of latex is it? I mean is there a specific latex for resin or any latex is okay? And whats the difference between coating / pouring clear resin after demolding and before demolding? Is before demolding easier? I want to learn resin arts so i need more informations. Thank you in advance.
Any liquid latex should be fine! I’ve used a brand ‘meant’ for horror make up and it was the same as any other brand. Top coating out of the mold leaves a nice domed finished, for more info check out my video here: ruclips.net/video/5-VBL4k24ho/видео.html 😊
Please share how to get the materials at wholesale rate if possible
Que material es la base en al que está aplicando el material
Lovely tray. Is it not possible to use adhesive tape instead of latex
Divina
What's the purpose of the latex???
si può mettere colore acrilico nella resina
This is stunning, thank you for sharing x
Thank you so much 💗
Woww, it's so beatifull.
How much resin did you mixed
How much would this cost?
Liquid latex! Genius!
Did the black edges level out and mix in with the clear center over time or did you have to mix/shake it to cover up that clear area?
Yes the black pigmented resin pulls into the center over time 😊
May I ask in what temperature you let the resin set till the demolding? I have a lot of amine blush every time.😔
Room temperature or slightly higher than room temperature is ideal. Blush could be caused by high humidity levels and can be fixed by adding a top coat 😊
It is a beautiful and elegant tray! 😍👍🏼 I had the experience with the color in the edges (gold or silver), they pilled or get scratched very easy, do you have the same experience or not??? I’m thinking that maybe doing the edges before the clear top coat, can be a good idea! I’ll try that! By the way thanks for the tip of the latex, I didn’t have idea about that!
Thank you! 🥰 If you’re having issues you could try before the top coat, I add a few layers with the markers so it doesn’t scratch off 😊
You place the handles in the poured resin which holds the handles. However, when you turned the tray over there appears to be screws going through the underside of the board that would attach to the handles.
I also want to know how she placed those handles?
Same. Because mine fall into the resin every time. I usually just wait until it cures and then drill them in with a low impact drill.
Hello.Nice work. But if you put hot mug on this, it will not start melting the resin?
Thank you! No, it won’t melt the resin but could leave a small dent. We top coat with a higher heat resistant/protective top coat such as DCS Resin or Honey Resin by Dipon. You can use my code ‘SUMMERGIRL’ to save 10% 😊
This is beautiful tray. The colors makes it look dressy.❤❤❤😊
Thank you 😊❤
How much price
Stun-ning!!
What kind of resin do you use it is beautifully crystal clear ? A absolutely Beautiful tray 🤩👏
Thank you! 💗 I use EpoxyPlast B20 JewelCast by Dipon. You can use my code ‘SUMMERGIRL’ to save 10% www.dipon.de/
Lovely tray. Is it not possible to use adhesive tape instead of latex
Thank you! Yes, you can also use adhesive tape, I just find liquid latex to be easier for me 😊
This came out so gorgeous! 😍
Thank you! 🥰
رائع يامبدعه 😍
Can it break
🔥🔥🔥🔥🔥🔥😎❤️👍
Beautiful
Very sheik!
Magnifique 💗 💗
Beautiful
Beautiful work😍
Hermoso
spectacular
Really pretty Nadia love the Smokey look of this 😘😘🦋🦋
Thank you Barbara 🥰
Such a stunning piece!
Thank you! 🥰
Magnifique 💗 💗
So gorgeous!!! I am new at using resin, so I was wondering what Top Coat did you use?
Thank you! If I’m working with Dipon I love to topcoat with either Honey Resin or DCS Resin, in this case I used DCS Resin
Thanks so much for your prompt reply!!! I have a couple of questions: did you add some strokes to make it look this way? I’m in USA and cannot find the honey resin. I’ll try the DCS. Thanks for sharing your beautiful designs!
@@lindac1259 The resin slowly pulls in over time creating striations on its own. If you're in the US, I can also recommend Craft Resin - you can use this link to save 10% :) go.referralcandy.com/share/G537QB2
good job
love it
So gorgeous👍👍
Very pretty tray
Beautiful
BEAUTIFUL
Stunningly gorgeous!!
Masterpiece
Stunning piece
Beautiful 😍
Супер 👍👍
No answers, too bad!
Love it 😍
Thank you 💗
Beautiful.
What viscosity resin are u using?
A low viscosity resin 😊 I highly recommend Dipon (located in EU), you can save 10% with my code ‘summergirl’. If you’re located in the U.S, I can highly recommend Craft Resin, you can save 5% with my link: craftresin-us.refr.cc/summergirlcroatia
@@SummerGirlDesigns thank you so much!!!
How beautiful so elegant!
Thank you! 💖
Absolutely gorgeous. I am allergic to latex do you have any other ideas
I have seen people use regular white school glue with success! They cover the back almost completely and the resin doesn't seem to stick to it!
Wow 🤩 so beautiful 😻