Using the UBERFLEX Kink Resistant hose M22-14 to a M22-15 Sun Joe SPX2598 + AR ANNOVI MV925 Gun
HTML-код
- Опубликовано: 21 авг 2021
- If you are looking for an inexpensive and very good combination of pressure washer and accessories. Look no further. Or if you are just like me tired of the big gun that comes with you pressure washer.
Here below are some affiliate links that I really recommend you using + I will receive a very small commission if you use the link. Appreciate that very much.
Any questions please comment down below or DM me on IG: @297modz
UBERFLEX Kink Resistant Pressure Washer Hose 1/4" x 50' 3,100 PSI with (2) 22MM
amzn.to/3D5uCrC
AR ANNOVI REVERBERI MV925 Rear Entry High Pressure Gun
amzn.to/2WgG2HZ
Sun Joe SPX2598-MAX 2000 PSI 1.6 GPM 13 Amp
amzn.to/3mujAWS
!!! UPDATE: ADD THIS TO PREVENT THE LEAKING YOU SAW IN MY VIDEO !!!
Metric M22 15mm Female Thread to M22 14mm Male Fitting
amzn.to/3o0CELF
From Sun Joe to UBERFLEX
M22 to 1/4'' Quick Connect
amzn.to/3syS5N6
From UBERFLEX to Gun
3/8 Inch Quick Connect NPT to M22 Metric Fitting
amzn.to/3j6R9fS
Forney 75136 Pressure Washer Accessories, Quick Coupler Plug, 3/8-Inch Male
amzn.to/3y7zQiP
Tip of the MV925 Gun
Female Coupler, Stainless Steel, 2-Pack (1/4")
amzn.to/3D7O72L
If any of these quick connects fittings are out of stock, you might need to get this kit, which will carry some of them:
amzn.to/34nQnqg
I typically record with either my phone or GoPro:
Samsung Galaxy S10: amzn.to/3DVZFpF
Video shot with Go Pro Hero 9 Black: amzn.to/3vabvsZ
Go Pro Accessories:
GoPro Max Grip + Tripod: amzn.to/3uMbGsp
SeaSucker 4.5" Low Profile Vacuum Mounts (Black): amzn.to/37ffo55
SMALLRIG 9.5 inch Adjustable Articulating Magic Arm: amzn.to/3tYBORT
Single Shoulder Strap Mount: amzn.to/3DL7I8D
Sabrent GoPro Head Strap Camera Mount: amzn.to/3aEaD6k
SanDisk 128GB Extreme microSDXC UHS-I Memory Card with Adapter - Up to 160MB/s
amzn.to/2TRlsxg
For any Business Inquiries, Sponsorships or Collaborations in Dallas Fort Worth area or Aruba please e-mail me at: 297modz@gmail.com 
Авто/Мото
You, sir, are a gentleman and a scholar. We appreciate your effort to solve this issue for us. 🙌🏼
Anytime sir! Just remember to get this extra adapter/connector to solve your issue amzn.to/3o0CELF
Good info and thanks for getting all the information that we need to do a similar set up!
Thanks!! I have the exact pressure washer and I wanted it to be better this will definitely help
Hey thanks for watching! Take a look in the description of this video. There is a link to convert from M22 15mm female thread to M22 14mm. To avoid leak that I encountered! Keep your car shining!
Thanks so much I was trying to figure out what I need to do to change my hose on my sunjoe pressure washer
Your welcome! Been through that episode myself! Look in the description of the video there is 1 added quick connect piece that is not in the video that makes your life easy!
Great solutions! Thanks! The video is extremely helpful
You're welcome! I've had to deal with all those issues and than I thought since I have this platform why not use it to help more people!
Just got this done for my new sun joe appreciate this video so much🔥🔥🔥🙏🏽🙏🏽🙏🏽
Cool man! Enjoy your car washes now! Great feeling!
You did a great job. Everything is on point. Please thanks soo much.
Thanks man! Really appreciate that! I had the same struggle as you would. And since I have a channel to help people, why not use it!
THis was a really good video ! Have had an old pressure washer forever so I'm about to upgrade the whole setup finally. Going to use the flexzilla hose and the same gun. thanks.
Thanks for checking out the video! Washed the car 2 days ago and still puts a smile to my face on how great the Gun and hose is!
Thank you, very nice video!! I’m planning to run the same setup.
Anytime! Enjoy your washes! Thanks for watching!
Yes the quick connect will also save wear on your hoses on your foam cannon try running a 1.1 you will get better foam looking like shaving cream
Hi there, yes a few weeks ago a subscriber told me about it! And yes it works much better with the 1.1 tip thing. Thanks!
Sick car bro‼️🥵 really appreciate the insight on what adapters are needed for the sunjoe. I bought my hose and new wand to upgrade mine but wasn’t sure on what adapters…if any would be needed since mine is an older model. Maybe 2014..everything should be here Tuesday and if I need adapters I will most certainly be coming back to this video!
Appreciate that bro! Yes it's all about sharing the info! I'm e regular guy just like you and happened to put some videos online. And saw there is not much info about this hose and a sunjoe! Anything not universal is complicated! But there is always a solution!
Dude,i reccomend you to change the orífize nozzle of your foam canon to 1.1 for super tick foam. Its cost 10 bucks and for the most mayory of electric pressure washer its a game changer. The most foam canon have 1.5 nozzle but runnbetter on higher psi or gasoline pressure washer.
Hey man. I will definitely look into that and make a video of it 100%. Appreciate the recommendation!
You come back!!! 💪💪
Yes Sir thank you! Busy with work! Plus 100° outside doesn't help!
Great info. I bought the same gear for my Sun Joe.
Cool very good product! Just get the extra adapter here amzn.to/3o0CELF and than there will be zero leaks!
Where can I find a part number or solution for the water hose part it broke off on me and I don’t think Sun Joe sells a replacement part for it.
Do you know by chance what the connection size is at the gun for that model? I don't want to replace my gun and need a new hose for it.
Thanks 🤙
Anytime bro!
Is the adapter for “from sun joe to UBERFLEX” correct because on Amazon it says it is m22/14mm I thought the sun Joe needed a m22/15mm?
Yes sir. Just that the sun joe's thread is not fully threated. Don't know how to explain in words. And you have to tape it a lot @ the horizontal or 180° to avoid some leak!
I just bought an other compressor last week and will make different videos. Also do some comparison to help everyone to see what would be your best option if sticking with your included hose/gun or upgrade.
I had same issue with my sun Joe, bought tons of adapters was still no success ready to give up and buy a different machine
Mine had 0 issues with the fittings. It's been 2 years and still going strong.
Thanks for the video as it was most helpful. Do you have any plans to replace the plastic connect that Sunjoe provides for the connection that attaches from the pressure washer to the garden hose? The one Sunjoe provides leaks when I attach the garden hose to the pressure washer. If one day you do replace it, can you advise me of the product code, size of the quick connect and where to purchase it......thanks.
Hey there. Thanks for watching! I never thought about about replacing that. But if I do. I'll reach back to you!
What is the standard sunjoe hose? It looks similar at both ends to the hose that you bought, is the difference in the one you bought just the flex? Can I use all the attachments you listed on the original sunjoe hose ?
The standard hose from the sunjoe is M22-14. And the hose is M22-15 means there will be a little. The issue about the Sunjoe is that there is no gun that can be attached to the original hose! Beleive me I tried everything. Eventually I would have replaced the hose. But since nothing fit the original hose. I bought thr best hose possible which is the uberflex. If you want send me a DM on IG @297modz and tell me what you have and want I will help you out.
Are you getting a surge of water coming out the faucet connection everytime you release the trigger? It's happening to me everytime & I cannot figure what the issue is.
Did you happen to use this added adapter? amzn.to/3o0CELF
If you didn't than it will keep leaking regardless
Did you get the spray gun off Amazon with the built-in swivel??? Reviews saying it doesn’t have swivel!
Yes I got this from Amazon and yes it does swivel. Just not when spraying due to preassure.
Hey there, I have a sunjoe pressure washer, which has a 15mm nozzle, I’m looking to buy a longer hose but the one one looking at has a 14mm end to it, what is the connector I need to use ?
Thanks
Ly ( from Toronto, Canada)
Hi there:
If there is no quick connects this is what you need!
amzn.to/3AXEy6K
Hello and thank you for sharing. My challenge is, I don’t know how to connect the pressure gun (M22-14mm male) to outdoor standard faucet (3/4 inch male) ?
That’s what I returned all of them to amazon without being able to use it. Any thoughts?
I only do preassure washer. I have no idea how to work from the outside faucet. If I do, I'll let you know.
for anyone who wants to buy the hose just lay the hose out flat before you use it and leave it out for a little while
100% agree! And let water run for 1 minute or 2 before starting your preassure washer!
Can u send me the link in how to go from 15mm on the sunjoe to the 14mm quick connect. Thanks for the help
Yes Sir. Here you go
amzn.to/3o0CELF
But that one is not a quick connect.🤷♂️
i believe that when you have an o ring seal you dont need the teflon
That's clever! I had not done that! But I found a solution and added the info down in the description and found the correct adapter to avoid this issue!
Thanks and i hope it will workfor me, will you please send the link to buy these from amazon
UBERFLEX
amzn.to/3D5uCrC
AR ANNOVI REVERBERI MV925 Rear Entry High Pressure Gun
amzn.to/2WgG2HZ
Sun Joe SPX2598-MAX 2000 PSI 1.6 GPM 13 Amp
amzn.to/3mujAWS
!!! UPDATE: ADD THIS TO PREVENT THE LEAKING YOU SAW IN MY VIDEO !!!
Metric M22 15mm Female Thread to M22 14mm Male Fitting
amzn.to/3o0CELF
From Sun Joe to UBERFLEX
M22 to 1/4'' Quick Connect
amzn.to/3syS5N6
From UBERFLEX to Gun
3/8 Inch Quick Connect NPT to M22 Metric Fitting
amzn.to/3j6R9fS
Forney 75136 Pressure Washer Accessories, Quick Coupler Plug, 3/8-Inch Male
amzn.to/3y7zQiP
Tip of the MV925 Gun
Female Coupler, Stainless Steel, 2-Pack (1/4")
amzn.to/3D7O72L
Sir, I bought a new pressure washer and made a video of it. ruclips.net/video/0SIYDWlwNuo/видео.html
I will create a video tomorrow and hopefully post it same day or Sunday on how the Ubberflex hose works on it.!
I have a SPX 3000-XTI I want to order the Uberflex 1/4 “ X 50’ 3,000 PSI what connected do I need.
Do you have the pressure gun already?
If you don't want or need quick connect system this is the only thing you need for the Uberflex to work with you Sun Joe machine: amzn.to/3o0CELF
If you want quick connect system, you still add amzn.to/3o0CELF to your Sun Joe and then buy this quick connect set: amzn.to/34nQnqg and that is all you need.
Let me know if you need anything else.
What part exactly make this swivel?
I'm about to purchase similar kit to this only with adapter for Nilfisk pressure washer.
Thanks
The gun itself has the swivel mechanism on the bottom. Can't beat the price. Gun and the hose is a must! I have just bought a new compressor be pending for the setup and initial review.
@@297modz Keep rocking bro just subscribed
My Nilfisk pressure washer has QUICK CONNECT outlet...from the Pressure washer to Hose its QUICK CONNECT, how can I connect the hose to QUICK CONNECT ?
Thanks
My Nilfisk pressure washer has QUICK CONNECT outlet...from the Pressure washer to Hose its QUICK CONNECT, how can I connect the hose to QUICK CONNECT ?
Thanks
@@itamarkas hey man. Hit me up on IG so you can send me some pics of your quick connect! @297modz
where do i buy a pressure washer nozzle like yours?
Hey there I have been using this one amzn.to/2WgG2HZ and you can get it of Amazon. Works great!
what size adapter do i need if i want to use my original hose but get a shorty gun for it?
Hey man. There is no adapter to add any other gun to the original hose. I have tried everything and couldn't find one. If you find one please let me know. And I'll make a video about it.
@@297modz ahh bummer. i ordered a gun and of course didnt fit, been looking for the past hour lol
@@nodrog321 that is how I started. Order different guns. Multiple fittings and nothing. Went to home depot and lowes. Tried a bunch of stuff! Save your time get a new hose. 30 to 40$ and better quality. And if you want quick connects you add 20 to 30$ more. But just do a hose and you are all good!
Did you ise teflon tape because the fittings are dissimilar metals? The hose has aluminum fittings and the quick connects are brass. I wish uberflex and flexilla were available with brass threads
Nopes. Teflon is just to avoid air leaks!
@@297modz A Bad Combination Leads to Galvanic Corrosion. Brass and aluminum
I don't understand why hose fittings aren't brass. Or everything stainless steel. It's 10th grade science class. But these hoses seem to work for people. I guess you just have to throw them out when they bond. I do love the flexibility of the hose.
@dougprentice1363 Thinking about what you say makes sense. But nowadays, they don't make things that last forever. All about marketing!
I have a Sun Joe SPX2700- MAX 2100psi 1.65 GPM....will your exact set up work for me?
Hope you can help! Thanks!
Yes it will definitely work! If you want sent me a Dm on IG: @297modz or sent me an email 297modz@gmail.com and I can help you with everything.
Awesome! I'll email you as soon as I can thanks!
@@felipeluna9328 sure thing brother.
i have the same pressure washer, i'm about to order the piece to connect it to my uber flex
My o-ring is sticking out, How do I replace the black o-ring for my pressure washer?
If you are able to put it back. It typically works fine. You van always replace them. Those are universal!
@@297modz ok cool, do you know the actual name for it?
@@azeezoh9774 you called it correctly O-ring. At Walmart, Lowes or like Home Depot. You can get a variety pack for 5$ or less
@@297modz nice nice thanks, I just need some kind of tool pick to put the new black o-ring back in place
M22 to 1/4? So it’s not M22 to 3/8 from pressure washer to hose?
Yes that is the quick connect size to the hose! Now each machine has a hole and that's the one that is the 14 or 15 mm. Most machines or hoses are M22 14. But sunjoe is an M22 15 hole!
Hope this helps you!
Honestly no it didn’t help, please help me understand. I have an electric 1700 psi greenswork and from my understanding they are 15mm like the sun joes right? I just bought an Uberflex which I need (2) M22 fitting with a 3/8 quick connect for each side of hose right? Now the adapter that you connect to pressure washer you have them listed as M2214 1/4 plug and 1/4 quick connect M22 male. The M2214 1/4 plug would be too loose if I connect my 3/8 quick connect from Uber flex so I would need M2215 3/8 instead of the M2214 1/4 right?
@@esejuanito4925 I never worked with Greenworks. But if it says that it need to be M22 by 15 use this link. amzn.to/3o0CELF and to use quick connect on your Uberflex get this package and it will have everything you need. amzn.to/34nQnqg
That will solve all your issues and have spare parts!
Can u fit a swivel on this ?
Yes you can sir! Just not when you are holding the trigger. Due to the amount of preassure while spraying.
@@297modz Awesome brother could you tell me what fitting or size that would be ?
@@Ali_o.O are you buying the same gun and uberflex hose?
@@297modz Yes I'm going get the same gun and the hose is different has the same m22-14 connecter.
@@Ali_o.O ok.
You'll need the amzn.to/3syS5N6. And the amzn.to/3y7zQiP
Thanks for doing the research for us lazy folks lol
Lol. Anytime! Thanks for watching
Why not just back your car up a little so your hose will reach all the way around your car?
Longer hose makes life easier!
have the same issue. it's how china makes money. 😊
Not only China but most manufacturers want to be slightly different, unfortunately.
not helpful
What are you needing help with?
How can I connect this u reflex hose to a cox reel and then connect my ryobi 1800psi to the cox reel? This is so confusing 🫤
If the cox reel is for water yes! The ones I know is only for air. Do you happen to have one for water?