Hi, my friend, I sure did appreciate your video. My return line came off and i had no clue what to do until your video came up. Thanks a lot i can now attempt my repair first thing in the morning.
This video was a big help! Thank you! Here's how I replaced the 3/16" line from tank to carb.... If your fuel line kit doesn't come with the wire tool, just push about 1/2 to 2/3 of the new fuel line into the 3/16" opening on the top of the tank. Then insert a tool or hook into the large (normal) tank opening, grab the new line, and pull it out the large opening. Take the fuel filter and push it onto the new line. Now push the new hose with filter back into the tank. Pull any excess new line out from the top of the tank so the filter sits on the bottom. Finally, connect the new line to the carb. Hope this helps :)
When you insert the new tube, put enough in so you can pull it out where you put the gas in. then install the piece on to the tube and then go back to the top and pull out the excess tube ( until it'sa half to inch in)
I just went ahead I got a little file and as soon as the Thin part started whitening on the file and touching the hole I just turned it a little to widen the hole so the line could fit. I can get a drill bit and make it a little wider but I wouldn't count on all the scrap plastic falling inside so definitely something around that why that could fit inside the hole and stretch the hole out just a little and it takes literally about a second to 2 seconds
Hello - if you mean a Troy-Bilt 22, it's a 2-stroke engine so there is no engine oil to change. The cylinder is lubricated via the 2-cycle oil mixed with gas. If for some reason your model is a 4-stroke, then there would be oil to change but the specs I see on the TB22 are that it's a 2-cycle engine. www.troybilt.com/en_US/string-trimmers/tb22-curved-shaft-string-trimmer/41CDZ25C766.html
I went out there two weed eat and I heard something rattling in the gas station and I saw that it was the fuel filter the tube that went in it had completely disintegrated I went to home Depot and all they had was a kit for all three lines is this the only way? Please help I'm 67-year-old handicapped female without a guy around. And the kit cost almost $30. Which I really can't afford.
@@LuckyDog-v3h The line kit I used is on Amazon and a lot cheaper: amzn.to/498TLB0 For my instance I only replaced the line and not the fuel filter, you might look for other videos that show that of needed. Hope this helps!
@@TheEclecticHandyman thank you I was just wondering if I could get tubing. And change the filter tube out I don't know I don't think I can do this anyway looks like it's something that I'm not sure I can handle I don't hardly have tools either. Is the tubing a special kind
I went o my tractor supply today and got the fuel return line but one size 1/8 and it’s thick it’s no way getting it in the small hole I think I need the 3/16 smaller one so tomorrow I’ll try harbor fright and get the 3/16 one size down and Mandy could finally trim around my palm trees
Yeah I address that at the 3:26 mark here: ruclips.net/video/vTnyzz37sNk/видео.htmlsi=lq_uAlXezX9REX0A&t=206 The line I was replacing was just a return line so it was not required to replace in my application. This repair has been working now for 4 years (still using that same weed trimmer) so getting the return line inserted enough worked well for my trimmer.
So I have the link in the description of this video for the exact kit from Home Depot I used and it's showing $4.38, but out of stock. This is pretty standard issue small engine fuel line which you could probably also get off of Amazon really cheap.
Hi, my friend, I sure did appreciate your video. My return line came off and i had no clue what to do until your video came up. Thanks a lot i can now attempt my repair first thing in the morning.
@@jackroche727 Glad it helped, thanks for watching! 🛠️
This video was a big help! Thank you! Here's how I replaced the 3/16" line from tank to carb.... If your fuel line kit doesn't come with the wire tool, just push about 1/2 to 2/3 of the new fuel line into the 3/16" opening on the top of the tank. Then insert a tool or hook into the large (normal) tank opening, grab the new line, and pull it out the large opening. Take the fuel filter and push it onto the new line. Now push the new hose with filter back into the tank. Pull any excess new line out from the top of the tank so the filter sits on the bottom. Finally, connect the new line to the carb. Hope this helps :)
Excellent break down of the procedure and thanks for watching! 🛠️
Super helpful video! Addressed issues I was having with the fuel lines and made it easy to follow what to do if things went wrong. Thank you!
Glad it helped, thanks for watching! 🛠️
Great tip! I resorted to using a smaller fuel line to insert the line in the tank. I'm going to do this instead.
omg i love your video! this is why i love youtube, great ⭐️⭐️⭐️⭐️⭐️
Thank you I'm glad it helped, thanks for watching! 🛠️
Thank you so much, it looks like you just saved me $200.
Glad I was able to help, thanks for watching! 🛠️
thanks for the walk through. my question was about the return line and how long. now i know! good old youtube
Glad it helped, thanks for watching! 🛠️
Exacty what I needed to know. How far in the return gas line goes into the tank. About an inch. Thanks!
just what I needed thanx
Glad it helped thanks for watching! 🛠️
Thank you so much ! Great video. Just ran into this problem.. Never fails..
What about that black part you pulled out how do u install that
When you insert the new tube, put enough in so you can pull it out where you put the gas in. then install the piece on to the tube and then go back to the top and pull out the excess tube ( until it'sa half to inch in)
Need the fuel line diagram for Troy built leaf blower
Try searching your specific model online for the part diagrams. RepairClinic has many online I've used in the past as well.
Best mechanic it hurts watching this. Least we know the return line and the fuel line
This is easier if you remove the fuel tank and apply the lines then run them to the carburetor and reattach the fuel tank .
Putting the return tube in was almost like trying to put a square peg into a round hole lol
Yes it was like pushing on a piece of thread and it was the most difficult part.
I just went ahead I got a little file and as soon as the Thin part started whitening on the file and touching the hole I just turned it a little to widen the hole so the line could fit. I can get a drill bit and make it a little wider but I wouldn't count on all the scrap plastic falling inside so definitely something around that why that could fit inside the hole and stretch the hole out just a little and it takes literally about a second to 2 seconds
Thank you for sharing!
Hi bro how to change oil on tb 22 trimmer I can't find anything
Hello - if you mean a Troy-Bilt 22, it's a 2-stroke engine so there is no engine oil to change. The cylinder is lubricated via the 2-cycle oil mixed with gas. If for some reason your model is a 4-stroke, then there would be oil to change but the specs I see on the TB22 are that it's a 2-cycle engine. www.troybilt.com/en_US/string-trimmers/tb22-curved-shaft-string-trimmer/41CDZ25C766.html
It helps to cut the fuel line on the top at an angle. Then it helps to put a little grease or Petroleum jelly on the ends.
I replaced my line as well with that same kit but it leaks fuel on the tank side where the line goes in. Also a Craftsman trimmer.
After you cut the angle on the return line, dip it inside oil…makes it A WHOLE LOT EASIER feeding it through that hole.
Great suggestion for next time thanks!
Geez I wish I had different color fuel lines. Just replaced complete with bulb on a blower, gonna have to label what to what
well done
I went out there two weed eat and I heard something rattling in the gas station and I saw that it was the fuel filter the tube that went in it had completely disintegrated I went to home Depot and all they had was a kit for all three lines is this the only way? Please help I'm 67-year-old handicapped female without a guy around. And the kit cost almost $30. Which I really can't afford.
@@LuckyDog-v3h The line kit I used is on Amazon and a lot cheaper: amzn.to/498TLB0 For my instance I only replaced the line and not the fuel filter, you might look for other videos that show that of needed. Hope this helps!
@@TheEclecticHandyman thank you I was just wondering if I could get tubing. And change the filter tube out I don't know I don't think I can do this anyway looks like it's something that I'm not sure I can handle I don't hardly have tools either. Is the tubing a special kind
I went o my tractor supply today and got the fuel return line but one size 1/8 and it’s thick it’s no way getting it in the small hole I think I need the 3/16 smaller one so tomorrow I’ll try harbor fright and get the 3/16 one size down and Mandy could finally trim around my palm trees
Not sure it will be the correct size, but the universal kit I used was this one: amzn.to/498TLB0 Thanks for watching! 🛠️
you can tell me you didn't stop by the nail shop before you made this video 😂😂😂 nicenails
You didn't put the little black piece on the end inside the tank.
Yeah I address that at the 3:26 mark here: ruclips.net/video/vTnyzz37sNk/видео.htmlsi=lq_uAlXezX9REX0A&t=206 The line I was replacing was just a return line so it was not required to replace in my application. This repair has been working now for 4 years (still using that same weed trimmer) so getting the return line inserted enough worked well for my trimmer.
Ty
$3!? Now is $10 at home depot!
So I have the link in the description of this video for the exact kit from Home Depot I used and it's showing $4.38, but out of stock. This is pretty standard issue small engine fuel line which you could probably also get off of Amazon really cheap.
There is a wire tool specifically designed to do this job easier and quicker than this.
can you share what kind of wire tool to use
👍
I didn’t know it was possible to make an even more boring fuel line😊 replacement video but it is