2009 Suzuki SX4 front motor mount replacement

Car was making horrible vibration sound when on throttle, believe to be multiple motor mounts but was actually the longitudinal crossmember that was jacked up into the transmission.
Anyways heres how you replace the pain the behind front mount

[@Kyle-kg8rz]

Thank you for this! I’ve been slowly working on my Little SX4 for a while fixing everything up. I messed with that second, hard to reach bolt, off and on for hours using my offset 14mm. Going to get a swivel socket ASAP.

[@vroomba03]

Might be having the same issue. Was the vibration at its worst while in drive at standstill, but eliminated when in neutral/reverse? And did you replace the crossmember or attempt to straighten it?

[@raycadbury]

So it actually wasn't as bad while in drive, still noticeable in reverse but a different vibration. As it turned out it was the crossmember being bent into the tranny after a bad oil change and the vibration was eliminated when i bent it backwards into place

[@nerdylicious1814]

Was it vibrating when in idle? Like starts vibrating 2 minutes after turning on?

[@kibbles35]

Did you solve vibration?i getting all 4 replaced soon

[@raycadbury]

yes, turned out to be the crossmember was bent upwards either from jacking or hitting something but that was the source of the vibration not the mounts