Vacuum repair man shows how to replace a Dyson DC40/UP19 COV hose
HTML-код
- Опубликовано: 17 мар 2023
- If this was helpful and you would like to send me a tip as a thank you: venmo @Brett-Magnuson-3
COV hose: amzn.to/42kXZ5T
Torx set: amzn.to/47vqnDH
Interested in investing in a quality vacuum that can last you 20 years? Contact us directly at (321)454-3838 Ask for Brett
www.richardsvacuum.com
![[DOKKAN BATTLE] August Producer's Letter](http://i.ytimg.com/vi/JUTYpaV_4Ic/mqdefault.jpg)
Exhaust filter: Yes...! Thank you. A quick fix made all the more straightforward by your video.
Exhaust filter - many thanks, successfully replaced the hose. Couldn't have done it without this video. My small screws took a T7 and not a T8, but I bought a set of cheap torx so it may be them that is the problem and not your instructions!
Replaced the COV on my DC40. Your video was a great help. Your hint to look down the vac intake port to insure that the foam seal was properly inserted probably saved me a lot of work. There a good chance I would have missed that one. Thanks
Exhaust filter - thanks, fixed this throwaway Dyson with your help - retired guy, a 32$ hose and 9$ torx set - keep making these and thank you!
Thank you! While cleaning a clog today the entire wire frame of this hose came out. I have my parts on order now and will fix it back up this week with the help of this video.
Exhaust filter! I replaced both hoses but this one was the tricky one. It would have been impossible to fix without your tutorial. My Dyson has been out of commission far longer than it should have been. I only wish I had seen this video sooner. Thanks!
Thank you for a very helpful video. Thank you for posting what screwdrivers were needed at the start of the video. It still took me 3 stores to find the right one. I started with your older video and had paused it right before you mentioned what size. Vacuum back up and running great. This is the 2nd part (1st was the long suction hose) I've replaced on my Dyson, so glad I can replace these parts rather than have to replace the whole vacuum. Exhaust filter!
Great video. A lot of help. The screw with the funny plastic washer is a bit more accessible if you adjust the hose to the other position.
Thank you so much for sharing this video. I was able to fix the vacuum for $12 instead of buying a new one. Your tips on how to insert the hose were very helpful as well.
Saved myself buying a new dyson!!! Huge thank you such clear and short instructions. All works well now.
Thank you so much for your step by step help. We watched it to the end and if it wasn't with your help we couldn't have fixed it. Thanks.
Thanks, great directions for replacing cov hose. After looking at another video I figured out and was able to see the holes in the hose that I need to replace.😊
"Exhaust filter" :-) Thank you so much for so generously creating this video. I now know where to start. Fingers crossed I can pull it off.
Thanks! I couldn't have completed this project without your excellent video.
Thank you! I was thinking I was going to have to buy a new vacuum but I fixed it thanks to you!! Appreciate this video. Very helpful
Thanks, the video helped me repair my Dyson and saved me a few quid.
Looks very useful and easy to follow, have ordered the part so hopefully the fixing the replacement will go smoothly! Thank you
So I watched and Im ready for the job! Thanks so much for making it so easy with the links to the parts and tools . I'll be back after I receive the parts and attempt the job . Thanks so much !!!!
Exhaust filter. Just finished doing this job whilst playing and pausing your video which made the job easy, thanks very much indeed.
Great video, saved me a lot of time and money, your lead in to what tools helped, I had to buy a T8 and T15, Harbor Freight 6 bucks
Really helpful video I'm just about to replace this hose on my daughters DC40 and your video should make it much easier to do. Many thanks.
Thank you. This was so helpful.
Don't forget the exhaust filter.
Fantastic video. Your instructions and hose part link to Amazon saved my vacuum!
Thank you Sir for such a clear video step by step, you have save me from having to buy a new vacuum! Thank you Adrian
Thanks. Super helpful. No suction on my DC40... opened it up and saw the torn hose. Came immediately to RUclips and saw this... That T8 is rare... searched in my garage and I do not have one. Just placed an order on Amazon for a set because Home Depot doesn't have one either.
Excellent video for a difficult task. Very well done
“Exhaust Filter”
Thanks a ton! Hugely helpful.
Watching to make step chart as hose here tomorrow. I have used painters tape to keep from dropping screws. Thanks for your video.
Thank you so much for this awesome video. My vacuum is fully fixed and works great again!
great tip about checking the foam seal was correctly seated, thanks
With the help of this video able to fix my DC40.. Thank you... Exhaust filter.
Amazing, thanks Richard - just ordered a replacement hose from Dyson and your video will really help when it comes to swapping it over 💪😀
Exhaust filter - Thanks again Richard, just finished the repair and my DC40 works like a dream 😁💪
Thanks, I am going to try it myself! You made it look very easy.
Thank you for the tutorial on how to repair our DC40.
Thankyou so much! Clear instructions and a now a properly working vacuum.
This was an amazing video! I was able to do this myself and saved me so much money! Much appreciated!
Ordering the part hopefully it will work. Thanks for the video
It worked!.....Great video....well done man.
I used furniture wax to stick that small screw to my unmagnetised screwdriver.....worked a treat.
Thanks again
Great explanation!.Saved me time ,money and dignity!
Exhaust filter! Excellent video. Thank you so much!!
Fantastic video. Very helpful and made me save a bunch. Thanks a lot!!!
Very helpful! Thank you Richard 👍
Exhaust filter! I would have been lost without this video. Everything went together perfectly.
Thanks! Glad it was successful
Fabulous video !!! this was concise and to the point. non of that 'wazzup guys' nonsense. and I fixed my Dyson. Thank you so much!
Great video Amazing and clear explanation it saves us so much money thanks for making this videos
Extrememly helpful - I'd nver have done it without this video. Thanks!
Thanks, mission accomplished, your video a great help.
You make this look DOable. I will order the part and give it a go! Thank You!
Exhaust filter- Thanks so much, very helpful 🙂
Thanks. Very useful video. Very clear and well taken
Thank you!
Thank you! Great video . Was easy with your direction!
Thank you for the video. You saved my day.
thanks for your detailed video .
Very well done. Thank you very much
Thank you sir!!definitely helpful, the wife will be happy 🎉
Thanks for the video, I've now got a working Dyson again 😁.
Very helpful video! Thank you!
Thanks for your video. Great help!
great instructions!
Great help, thanks.
Excellent video. Thank you!
Thanks! Saved us a bunch of money!
Thank you, you're video helped out. So easy.. 😊
Great help. I should have been more careful about keeping track of which screws came out from and where. Unfortunately although you mentioned short screws I was still not sure which screws were being referenced, the regular small ones or the ones with the very short ones . Hopefully I got it right 😜
Thanks so much! Very helpful!!
2nd time you've helped me, thanks again!
Thank you, you're a life saver
Exhaust filter thank you so much!!
Really helpful video, saved me ££’s.
So a big thank you from us across the pond in Wales.
Thank you very much! I was just giving my DC-40 a good cleaning, the floor brush was very clogged, which I'd never seen so bad. It was the cov, two big holes in it. I'm pretty handy, but I was wondering if this job would be too complicated. Thanks to your video I'll be getting this done as soon as the part arrives from Amazon. Well done, sir!
Thank you so much video is extremely helpful
Thanks for the guide! Saved me $$$
Thank you for the video, very well demonstrated.
Yw! Thanks for the kind words!
@@richardsvacuumcenter unfortunately I broke the spring it was too delicate, cant find replacement.
@@JP-qz9uz send me an email with a picture of the part and I'll look through my spare parts to see if I have one. richardsvacuummi@gmail.com
Exhaust Filter. Thanks, I'll order a new one and fit it after seeing this video.
Thanks man, great content.
You are the rock 🙌🏽🙌🏽🙌🏽 thank you for sharing.
Thanks - ever so helpful.
Thanks very helpful
Exhaust filter :D Thanks for your help
That pneumatic drill is so nice
Thanks! It’s literally never had a problem.
Very helpful; thanks!
Thank you so much. Saved me
'exhaust filter' Thank you!!
Very clear
Thanks
Thanks so much for your instructions and all looks well and sounds okay. I washed one of the filters too. the inside is spinning and i cant see any blockages, but why doesnt it seem to have much suction. I was expecting more. My Dyson, last year, was so heavy to push round and even before i replaced the COV, it seems too light still... Hmmm.
Is the lower hose connected? Or clogged?
You just fixed my vacuum cleaner! :)
So many different screw sizes. Makes it really tricky
Exhaust filter. Skipped out on Mark of the Ninja & Uncharted 3 on Crushing today to try and fix this but I’m missing and waiting for the hose replacement (the smaller one) and a the T-8 screwdriver.😅🙏
Thanks for this video, very much appreciated. I have 'Dyson Light Ball™ upright vacuum' and has lost suction in upright position. I checked the hose, looks fine. What could be the reason? please advise.
Super greatfull! Thank you! 🤟😎
Thanks!
Thanks, this was a big help. I still have a problem however. I wish I could attach a photo here. There is an air gap between the cross over hose flange when it is in the attachment vaccum mode. However the floor vaccum mode it seals properly.
After using the vaccum for a few minutes, the hose flange is now seating properly when its in the upright mode.
Glad you got it figured out
Exhaust Filter - 'Sorted' thanks.
Thank you!!!
It helped, thanks.
Brilliant 👏
Hi. Thank you very much for taking time to upload an excellent video. I was able to follow all your instructions except for seating the plastic washer. I ended up not putting the plastic washer and using the screw directly. Would that be an issue?
It could be. I’m not sure the head of the screw is large enough to keep it secured in
Gracias!
Excellent e filter
btw you have made my wife so happy!
Super thanks. 👌