HVAC Failure Fix | TruckU Tech Tips

Поделиться
HTML-код
  • Опубликовано: 6 окт 2024
  • Bruno demonstrates how to quickly fix a climate control system with Heater Treater.
    Follow Us!
    Facebook: www.truckutv.co...
    Twitter: www.truckutv.co...
    Linkedin: www.truckutv.co...
    Business inquiries
    Website: brentontv.com
    Email: info@brentontv.com
    ac,problem,fix,hvac,cheap,quick,how to,install,ford,jeep,chevy,dodge,toyota,honda,two guys garage,2 guys garage,matt steele,bruno massel

Комментарии • 16

  • @daleapal
    @daleapal Год назад +13

    Show how you replace that while it's still in the truck!

  • @jerrysouthside8597
    @jerrysouthside8597 2 года назад +3

    I did the heater core replacement in my uncles dodge Dakota it’s no small task

  • @timothycollins6583
    @timothycollins6583 3 месяца назад +1

    Are there videos on the actual procedure for Ram trucks?

  • @bobbyb9718
    @bobbyb9718 7 лет назад +1

    I would have liked to have this kit for my '97 Cherokee. I had exactly same issue with its blend door.

  • @santiagofrias6071
    @santiagofrias6071 Год назад +4

    Where do I get this kit at??

  • @illidan2ify
    @illidan2ify Год назад +3

    Mode door and blend door are completely different

  • @brentmcmahon8188
    @brentmcmahon8188 8 месяцев назад +1

    If you lose air flow from system and you hear blower running but very little air flow so take the 3 screws out of motor on passenger side and reach up inside where bower came out and grab the broken blend door may have to spin it to get out put motor back in and full return of max air flow. That is the dumbest thing you can do to your truck just pull dash and hvac box and replace everything and put Dlend door USA they are made of aluminum cnc machined and they will last a life time and replace everything heater core evaporator and all the actuators and only use the factory ones they are the best Dorman are junk. So good luck!

    • @JimGrady67
      @JimGrady67 Месяц назад

      I just did that to remove my broken blend door. It was very easy. I got my replacement on order. Did you have to take the actuator off to put the new door in? Thanks

  • @moosenbeans903
    @moosenbeans903 9 месяцев назад +1

    I just put my charcoal bbq in the back seat and turn my ceiling fan

  • @LIFEISGOOD197
    @LIFEISGOOD197 11 месяцев назад +1

    PLEASE WOULD THIS WORKS IN A 1997 DODGE VAN WAGON B3500 ?

  • @izzymorgan2461
    @izzymorgan2461 7 месяцев назад

    I removed my dash and it has the dual zone sliders in 09 Ram 3500 laramie. How do I push those sliders back in?

  • @connieneukam747
    @connieneukam747 2 года назад +1

    How do you unplug your blend door on the passenger side on a 1998 Dodge ram

  • @charliesaviakjuk7286
    @charliesaviakjuk7286 Год назад +1

    Need video

  • @chrisferguson1797
    @chrisferguson1797 Год назад

    How much and how long to ship too 71845 Lewisville Arkansas

  • @maddexxx847
    @maddexxx847 9 месяцев назад

    So how is this going to save me any money? I still have to remove the whole plenum. Which is the same thing the dealership would have to do also. You guys are scamming.