C3 CHEVY CORVETTE HOW TO REPLACE AND FIX THE POWER DOOR LOCKS

Please SUBSCRIBE!
Check out Garry Dean's Detail Juice Nation on Facebook!
Follow me on Instagram @garry.dean.35
My cell is 813-846-4406 if you need to contact me.
Have a request for a how to video or would you like to know how "Garry Dean" does it or what I use, send me a message!

[@LoanExpert]

Thanks for this video...have you replaced the lock cylinders on the 80 C3 yet?

[@quatre5555]

same issue with my 81 except no movement at all. found all kinds of wrong hardware when pulling the door apart and found well nuts holding on a replacement switch harness on the driver side. prolly just gonna do the same changing both actuators and wire a new switch correctly and hope that fixes it.

[@jillianbarbieri3600]

I have the same problem on my 81", Both locks worked at one time. Now, both doors lock with the switch but, they won't switch up to open. Checked both pigtails and they are clean and soldered. The only thing I can think of, according to your video, is that one of the switches is no good. My question is did you re-try the OLD switches again once the new wires and switches were working on your car? I would be curious if it was the wiring and or one of the switches....

[@barryhartford9317]

Great video

[@davidandbrandee]

We need part 2 and 3 on making jerky! Haha. :)

[@DeathByLego]

What about no power locks?
The lock on the drivers door says its disengage (unlocked) but i cant get the door open from either side... I read that I can take off the door panel while its closed. But I still need to figure out what isnt working..