I got it! Reset holding down the button by the batteries 5 seconds; press 0000, lock button; then 1, lock button; then 1111 wait 2 seconds while it flashes; then type in new desired user code and press the lock button ; should hear 2 beeps….
Seriously, just use the directions on the inside of the cover. I didn’t know they were there until I saw them in the video at which point I paused it and figured it out from there. This video is helpful but at the same time confusing. Thanks ferr postin fella
THIS WORKS I’LL EXPLAIN, PLEASE READ To add a new passcode -hold the set button until it beeps -type in the pc code (it should be 123456) -press the enter button (the lock button) -type in 20 - press the enter button (the lock button) -add in your new password 4-6 digits -press the enter button (the lock button) -finally press the set button To change the default combination (i normally set it to be the same as my passcode) -hold the set button until it beeps -type in the pc code (123456) -press enter (the lock button) -type in 10 -press enter (the lock button) -type in the new pc code (6 digits) [for me I put it to be the same as the User code that way the default code doesn’t unlock the door] -press enter (the lock button) -press the set button
Hey...whenever i play the set button, and then type in the passcode, and then the Lock button, it locks the door instead of letting me change the codes =\
Hare to follow... Please do it again.. and try to be more sure of yourself...... I do appreciate the effort.. I was looking to see if i was the only one. But, i was not. I think you could do this better... Please do...
To change your programming code (PC), follow the instructions written on the lock and make sure that the new code is 6 digits otherwise it won’t work. You’re welcome
Thank you, this was one of my difficulties. The other was that I needed a separate user code, my new master code couldn't act as an unlock code, unlike my old (and failed) Schlage lock.
Tbh this video made me mad, cause you're talking abt changing the PC, making it sound like ur going to tell us how in the begining, then SKIP the WHOLE step and goes to uc😑
I followed the instruction and it works but, whenever I enter the programming code it's still unlocking it means I have two passcode the new one and the default PC. What's the problem? How can I remove the programming code?
You’re mumbling to yourself and not showing people what you’re doing to zero? Seriously? Unless somebody knows what to zero means they have no idea what you’re talking about. Either delete your video or do a better job of it you do a really bad job of explaining read all the comments it says I’ll pour you were explaining
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
That really does it. After watching this video, I came out more confused than before.
Exactly😂
@@arianeribeiro902 🤣🤣🤣
Yep
Bruh it's not working. My dad said he didn't change the PC code.
I got it! Reset holding down the button by the batteries 5 seconds; press 0000, lock button; then 1, lock button; then 1111 wait 2 seconds while it flashes; then type in new desired user code and press the lock button ; should hear 2 beeps….
Seriously, just use the directions on the inside of the cover. I didn’t know they were there until I saw them in the video at which point I paused it and figured it out from there. This video is helpful but at the same time confusing. Thanks ferr postin fella
Yeah, I was going crazy looking for the book with the directions for how to change the code and forgot they were on the darn thing!! 😂
THIS WORKS I’LL EXPLAIN, PLEASE READ
To add a new passcode
-hold the set button until it beeps
-type in the pc code (it should be 123456)
-press the enter button (the lock button)
-type in 20
- press the enter button (the lock button)
-add in your new password 4-6 digits
-press the enter button (the lock button)
-finally press the set button
To change the default combination (i normally set it to be the same as my passcode)
-hold the set button until it beeps
-type in the pc code (123456)
-press enter (the lock button)
-type in 10
-press enter (the lock button)
-type in the new pc code (6 digits) [for me I put it to be the same as the User code that way the default code doesn’t unlock the door]
-press enter (the lock button)
-press the set button
This helped me more than the video 🤣
this was way clearer than the video, thanks!
How do you delete a code that’s already in there??
Hey...whenever i play the set button, and then type in the passcode, and then the Lock button, it locks the door instead of letting me change the codes =\
Thank you so much for this. Do we know how to delete a code?
Thank you. The instructions were confusing then saw this and realized how easy it was.
Hare to follow... Please do it again.. and try to be more sure of yourself...... I do appreciate the effort.. I was looking to see if i was the only one. But, i was not. I think you could do this better... Please do...
Thank you so much. I really appreciate it much easier because of this video.
Thank you saved my life
How did you take off the 1-6 code...? I'm confused
Thank you so much, I hope life is treating you greatly
Thank you!! Very helpful
To change your programming code (PC), follow the instructions written on the lock and make sure that the new code is 6 digits otherwise it won’t work. You’re welcome
Thank you, this was one of my difficulties. The other was that I needed a separate user code, my new master code couldn't act as an unlock code, unlike my old (and failed) Schlage lock.
How do u remove the plate
That covers the door
Easy..peasy!please!! Thank you!!
This video was a lifesaver! Thank you sir!
How were able to remove the civer
Can the key part be rekeyed?
Seriously, did you really mumble your wat though the most important part of the instructions???
I press the set button and it beeps, so I enter the PC and press enter. But I press 1 0 and enter, it doesn’t work at all?
I was never given the deadbolt code by my landlord and its no longer the factory code of 1-6 😢 how can i reset it without the code?
Tbh this video made me mad, cause you're talking abt changing the PC, making it sound like ur going to tell us how in the begining, then SKIP the WHOLE step and goes to uc😑
The title says passcode normal reading skills would say that this was about the uc the whole time
Cut them nails wolverine lol nice vid btw
I followed the instruction and it works but, whenever I enter the programming code it's still unlocking it means I have two passcode the new one and the default PC. What's the problem? How can I remove the programming code?
There is instructions on how to delete an existing code
@@abhaydhillon1308 where are they?
This video was a nightmare. Also, you have beautiful hands.
What do if mine don’t beep when I press it?
Dude you are all over the place with this video.
I change it but the 123456 works too and the new one I pit
So how do you delete the 123456 code ?
What happens if the whole thing is dead?
Evet time i enter in 123456 and then i press the lock and the lock beeps two time. ??????,?,$:8:$:!/
Ik we all in front of a doorknob rn watching this
Can’t get it to work cuz you take a year to pic the numbers and it times out
Thanks man
Awesome..
How to change the user code without the passcode for a door easy lock
I got more confused by watching cuz u kept coming bk n forth on top enter ecodes but I sumwat got lil out of it
Would just go with the written Instructions that Danny L gave in one of these comments.
what if you don't know what the user code is because you forgot?
Thanks
Dude why is this so confusing.. I'm more confused now
Me too
Manicure?
Why be mean?
Thinking the same thing. If a dude is pressing buttons with his fingernails, they are way tooooooo long. Pretty gross Man. Pretty gross.
Keon McDonald Randy Zachary
Yikes. That’s very confusing!
Anyone wanna help me? I couldn’t follow this video
Got them girly fingernails
Does not work
Remake your video because you made it very confusing.
Explain every move and show the keys you touch instead of blocking them with your hand.
No. Didn’t work
Very confusing 😕
Wow
Remove this video RUclips. Manicure negligence at its worst!
What a brain
You need to cut your nails. I always cut my dad's nails and I'm 34 lol Wish I had a man to do it to lol
He was too confusing.
Hard to see what your doing and your a little confusing
fuck no!!
You’re mumbling to yourself and not showing people what you’re doing to zero? Seriously? Unless somebody knows what to zero means they have no idea what you’re talking about. Either delete your video or do a better job of it you do a really bad job of explaining read all the comments it says I’ll pour you were explaining
terrible video...
Totall confusing dude.