Short and sweet! Straight to the point! I’m gonna surprise my husband and have it installed before he returned from watching the EAGLES game today!!! East Peasy! TY!
I had a similar lock, same brand. Your video was simple and gave only necessary info. It's my 1st time installing this lock and I opened the box and realized I was in over my head. After watching your video 5 mins later my new electronic lock was installed. Thanks.
Hi! Great video, Thanks! So I installed a similar one. W/a flat numeric touchpad. I followed the same instructions as this one, and it was going great. However, after it went through its series of reboot, I took the wire out (can’t even remember why) @ part (1:40-in your video) once I reinserted the wire, the touchpad wouldn’t go through the automatic reboot series again…and the touchpad isn’t making any noise or showing any lights🤷🏼♀️ I’m going bananas. lol Tried back reset button, took batteries out/in, and nuttin.🤦🏼♀️ Any idea where I went wrong? Or what I can try to set it up, get it functional? Thanks! 🙏🏼🙏🏼🙏🏼
I'm stuck at 44 seconds part. The 2 big screws dont go fully inside from the back. They are stuck at halfway and so the outer fingerprint side of the case is totally loose. What's the catch.
I have a door open from the other side(reverse). When I put the back plate, it doesn’t lock all the way!! I didn’t put battery and master code. My assumption was if I can’t do it by hand, it would not work with keypad. Should I have continued? How would this work?
excellent video, but if i may be so bold, be aware of the "backset" distance-- (backset is distance from edge of door to the center of keyway, and can be either 2- 3/8" or 2-3/4") you may need to twist the latch 180 degrees to lengthen it.
Have a lock that I took off the door to paint now that I am ready to I stall again can not get the lock to lock the dead bolt tries to turn the wrong way,I have tried everything and even watched your video,and still cannot get it to work. Help
Is yours also a deadbolt electronics LOCK? if yes take out a 🔋 for ten seconds or more before you put it back press the reset button and dont let go keep pressing as you put back the 🔋 the lock should turn green press the lock again and it should work normal your lock is reset to factory settings and the code is the default code
I am currently having that issue. Took it apart multiple times i can't figure it out. Its works manually but electronics keeps going to the left to lock.
Short and sweet! Straight to the point!
I’m gonna surprise my husband and have it installed before he returned from watching the EAGLES game today!!!
East Peasy! TY!
I had a similar lock, same brand. Your video was simple and gave only necessary info. It's my 1st time installing this lock and I opened the box and realized I was in over my head. After watching your video 5 mins later my new electronic lock was installed. Thanks.
I ❤ the way you were very informative and to the point, but in a understandable way. Thank You very much Sir..!!! God Bless You
Very thankful for this video because the instructions aren't great. This made it so easy! Don't forget to change the master code too.
Thank you for the easy instructions - took me about 5 minutes because of this!
Can rely on manufacturers instruction unless you can read Spanish or french ...
This coming from a guy that usually doesn't even read distructions
I just bought my first home and you made one of my hundred jobs just that much easier. Thank you for explaining everything so clearly. Great video!
This video actually made sense and it took me 20 seconds to program the dang thing! Thank you so much!
Thanks to your instructions I was able to reprogram my code (couldn't figure out that "10" meant type in the number 10) 😅
This is a genius video. So easy to understand.
P
I did it!!! Yay! U could seriously use a cpl extra steps but we both now have electric locks. Yay!!!!
Thank you so much! I couldn’t done it with out this video!
Hi! Great video, Thanks! So I installed a similar one. W/a flat numeric touchpad. I followed the same instructions as this one, and it was going great. However, after it went through its series of reboot, I took the wire out (can’t even remember why) @ part (1:40-in your video) once I reinserted the wire, the touchpad wouldn’t go through the automatic reboot series again…and the touchpad isn’t making any noise or showing any lights🤷🏼♀️ I’m going bananas. lol Tried back reset button, took batteries out/in, and nuttin.🤦🏼♀️ Any idea where I went wrong? Or what I can try to set it up, get it functional? Thanks! 🙏🏼🙏🏼🙏🏼
did you ever solved it?
I'm stuck at 44 seconds part. The 2 big screws dont go fully inside from the back. They are stuck at halfway and so the outer fingerprint side of the case is totally loose. What's the catch.
I have a door open from the other side(reverse). When I put the back plate, it doesn’t lock all the way!! I didn’t put battery and master code. My assumption was if I can’t do it by hand, it would not work with keypad. Should I have continued? How would this work?
Could you share the brand name of this lock? I would like to buy it on Amazon. Thank you
SHORT AND SWEET! Thanks!!
excellent video, but if i may be so bold, be aware of the "backset" distance-- (backset is distance from edge of door to the center of keyway, and can be either 2- 3/8" or 2-3/4") you may need to twist the latch 180 degrees to lengthen it.
just bought this and about to install. thanks for the video.
This video was helpful .. thankyou 👍
0:18 Hm my flat blade is on a 45 degree angle. Is there anything I can do about it or it’s just a faulty product?
Have a lock that I took off the door to paint now that I am ready to I stall again can not get the lock to lock the dead bolt tries to turn the wrong way,I have tried everything and even watched your video,and still cannot get it to work. Help
Same here 😅
exactly the same thing happened
to me
it opens with the lock button
and locks with code
Is yours also a deadbolt electronics
LOCK?
if yes take out a 🔋
for ten seconds or more
before you put it back press the reset button and dont let go keep pressing as you put back the 🔋
the lock should turn green
press the lock again and it should work normal your lock is reset to factory settings and the code is the default code
Dang those yellow batteries that comes free with Chinazon items.
How good are the Harbor freight batteries😂
Does this lock do well in the rain?
Thank you , God bless.
Super easy, thank you!
How do you set code
What do you do if the lock goes to the left and to unlock also goes to the left?
I am currently having that issue. Took it apart multiple times i can't figure it out. Its works manually but electronics keeps going to the left to lock.
Awesome. Tanks
Great 👍🏿
Great video thanks a lot, happy holidays. Buy some bitcoin 😎
Add user doesn't work. Beeps for long time. Really bad
yes helpful but you could have pointed the camera towards the keys so idiots like me can actually see what's being done...
Martinez Daniel Hernandez William Martin George
Can’t get my cord to plug in at the end. POS