FYI: this works, But make sure you delete that user code 1234 because my brother tried that 1234 and the code we made. Both worked. So on the back of that instruction paper there should be an instruction of deleting an existing user code! Thanks for the video
This was excellent! Thank you so much! I wasn't sure if I could do this on my own but with your video I breezed right through it. The instructions are so overwhelming - forget about it- you took all the stress of that away for me!! 😁
This is the second home in which ruclips.net/user/postUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU we've replaced our "regular" doorbell with a Ring video doorbell and we really enjoy it. It is very easy to install and it works very well, with a clear picture through the app and good in-home use (we added the chime, which is also easy to install and doesn't require another thought to use).
This is a helpful video and the lock seems to be well made. Just keep in mind the deadbolt will have to be able to freely travel into the latch with no resistance. In my case we had a door that had to be pulled firmly against the weather stripping and this lock will not work in that situation.
Any reason why you would not be acle to use your existing deadbolt so that you could still have only one key matching your other manual locks? The existing one looks identical in size
The only problem I see with this type of lock is that it uses battery power to move the deadlock. There is another kind which simply frees the lock so the user can undo the deadlock by twisting the handle/grip him/herself. Makes a huge saving on batteries and last for ages as opposed to this type which does everything and runs out of batteries real fast Thanks for the video
Ok we got it all set up we try the pc code put it in then we get three beeps with red lights please help cant get to the point to the 1234 code bc pc code isn’t working for us
My lock was unlocking fine, but I could not figure out how to get it to lock from the outside. Nowhere in the instructions did it say how to operate the thing, only how to install, program, and troubleshoot. Apparently to lock it from the outside you just push the lock/unlock button only. Don't enter the code first or it will just blink red three times.
I have a question for you this company has contacted me to doing a installation video of this product but they want me to buy it from Amazon and then they will reimburse me after the video is this what they did for you or is this kind of a scam. Jim
I believe you just have to take the back off, rotate the lock lever to the other position, then put it back on. It's been a while since I read the directions...
I got u bro To delete an code is ur number the lock then 2 then lock then the number u want to delete then lock And it should be good I have a problem mine won’t take any codes it shows it took the code but when I put it in to open it rejects it
Where did you see the directions from the code. In my instructions it didn't say anything at all. I want to be able to change the programming code so someone can't just overwrite my code to enter
I think it was down at the very bottom of the front page of the directions. I recall it almost looked like fine print that you wouldn't think was part of the directions.
mine won’t even learn what side of the door it’s on it winds out all the way open and just clicks lmao. maybe i did something wrong? i followed the directions. i hate it
FYI: this works, But make sure you delete that user code 1234 because my brother tried that 1234 and the code we made. Both worked. So on the back of that instruction paper there should be an instruction of deleting an existing user code! Thanks for the video
Do you know how to delete a code?
@@DavisLR-1 yes it’s in the instructions set up add and delete user codes
This was excellent! Thank you so much! I wasn't sure if I could do this on my own but with your video I breezed right through it. The instructions are so overwhelming - forget about it- you took all the stress of that away for me!! 😁
Thank you. You made the installation a breeze and very quickly! I love how you got to the point and stayed on point!
Well done!
Thank you…thank you! I loved the closeup because I was able to follow step by step! 😊
I owe you a beer or three. This kept my profanity to a minimum, I did not throw anything out of anger, and the lock functions as it should. Win.
You are welcome. And I'd be happy to meet you anywhere in the Knoxville TN area for those beers!
This is the second home in which ruclips.net/user/postUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU we've replaced our "regular" doorbell with a Ring video doorbell and we really enjoy it. It is very easy to install and it works very well, with a clear picture through the app and good in-home use (we added the chime, which is also easy to install and doesn't require another thought to use).
Thank you!! I made it alot harder than I needed to, you saved me lots of time Sir!
During the rh or lh learning, deadbolt never comes out. Any ideas?
Mine did not come with programming instructions, this was excellent, thank you!
Help! When I hit the lock button the deadbolt locks then it retracts about a half inch. I notice yours did not do that. How do I fix that?
This is a helpful video and the lock seems to be well made. Just keep in mind the deadbolt will have to be able to freely travel into the latch with no resistance. In my case we had a door that had to be pulled firmly against the weather stripping and this lock will not work in that situation.
Mine stays locked after first step but yours locked then unlocked I don’t understand been trying for 45 damn minutes
Thx man I was puzzled with this lock and frustrated 😂😂 I have now thx to you
What are the keys for?
In the event the batteries die out?
Best video I could find,Thank you
Went by your instructions and worked great thanks
Any reason why you would not be acle to use your existing deadbolt so that you could still have only one key matching your other manual locks? The existing one looks identical in size
I have a huge problem when I program a code it shows it accepted it but when I put it in it rejects it
Whyyy!!!
LIFE SAVER !!!!!! 🎉🎉
Saved my life 😂 thank you
This was easy to follow and understand. Thank you!
The only problem I see with this type of lock is that it uses battery power to move the deadlock. There is another kind which simply frees the lock so the user can undo the deadlock by twisting the handle/grip him/herself. Makes a huge saving on batteries and last for ages as opposed to this type which does everything and runs out of batteries real fast
Thanks for the video
When I was entering the PC and I entered my new code. It always stayed red and never worked.
I lost the paper and instruction how can i retrieved the code for programming
How do I delete the 1234 code ?
Great vid, very helpful
Ok we got it all set up we try the pc code put it in then we get three beeps with red lights please help cant get to the point to the 1234 code bc pc code isn’t working for us
PLEASE HELP!!!
My lock was unlocking fine, but I could not figure out how to get it to lock from the outside. Nowhere in the instructions did it say how to operate the thing, only how to install, program, and troubleshoot. Apparently to lock it from the outside you just push the lock/unlock button only. Don't enter the code first or it will just blink red three times.
Hold lock button for 2 seconds
Thank you so much...I sat here for an hours trying to figure out what I was doing wrong....I appreciate your knowledge
I just was able to configurate it, I loss the instruccion, Thank you so much
Your a life saver!
Thank you soooo much
Thank you great video appreciate it
How can you set multiple codes?
How do I set the UC to this model? I am having trouble setting them up. Waste of money. try to return back. Not user friendly at all!
Thanks great video
I have a question for you this company has contacted me to doing a installation video of this product but they want me to buy it from Amazon and then they will reimburse me after the video is this what they did for you or is this kind of a scam. Jim
Sounds like a scam to me
@@willeval So they didn’t ask you to buy one before you did a video. You just never know a lot of scams going on
please help me, when I press 0000- lock-0- Lock it only opens to the right and I need it to go to the opposite side
I believe you just have to take the back off, rotate the lock lever to the other position, then put it back on. It's been a while since I read the directions...
Thank so much this helped a lot
The default code is still in effect idk how to erase it from memory I lost my I instructions…… basically had two codes the default and the new one
I got u bro
To delete an code is ur number the lock then 2 then lock then the number u want to delete then lock
And it should be good
I have a problem mine won’t take any codes it shows it took the code but when I put it in to open it rejects it
Where did you see the directions from the code. In my instructions it didn't say anything at all. I want to be able to change the programming code so someone can't just overwrite my code to enter
I think it was down at the very bottom of the front page of the directions. I recall it almost looked like fine print that you wouldn't think was part of the directions.
@@willeval Lowes had then on sale 2 for 69.95. they're were two sets of directions. One to install and one for code. I just found it lol
@@M3foo1 where!!!
Thank You !!!!!
Is that double wall oven for powder coating?
It is indeed
Good job
Thank you very much
Mine won’t register! It’s stuck in backwards! When you hit unlock it locks it! I can’t figure this damned thing out!
🐐
Good video
Thank you sir!
Thank you
Mine only works with the key in the deadbolt. If I lock the door and remove the key it malfunctions. Lock is a joke!
mine won’t even learn what side of the door it’s on it winds out all the way open and just clicks lmao. maybe i did something wrong? i followed the directions. i hate it
Thanks.
I heard the code lol