I am a recent widow and found that my dead bolt keys had been comprised. I bought these locks and used your video to install two of them. Great video and very helpful. Thank you so much
We just installed this exact lock. The only thing that needs to be added is that there is a step where you place 3 batteries, press a reset button with a tool in the kit and insert the 4th battery while doing that. If you miss this step, the lock won’t work. Otherwise super helpful!
This was a great and helpful video but I'm having issues with the lock not coming out unless i manually use my key. When i try locking with just holding a button down like you say, you can hear it trying to lock but it won't come out. It's like it's stuck so i loosened the screws and it's still not coming out to lock. It's almost as if something inside is not catching to push it out. Any ideas what it could be? I'm just lost 😢
I know when our batteries were low, the deadbolt wouldn't extend. But when we changed batteries it worked. Also, does the deadbolt come out if the door is open? If it extends when the door is open, but not closed, maybe it's not aligned perfectly? I would start with fresh batteries, see if that makes a difference. Then maybe try to re-align it with the door frame. Other than that, i'm not sure. Maybe it is something inside. Maybe check the video at 1:20 and make sure that's all correct
We recently had the same problem. When we were installing ours, the key was inside. If this is your first install, make sure that everything is in unlocked position and no key inside while the installation.
Yes still works fine. No issues with the cold. Last year there was an issue where it was "slow" or something. But it was just dying batteries. Once we changed them it's worked great.
Supposedly upon initial power up it detects the orientation. Before installation I was able to rotate the lock both left and right by forcing it against the motor inside. Then it went both ways. After install and bat install it just changed to work how installed. Maybe a full reset would work.
Any idea why after I insert the batteries it throws out the throw in the locked position, but then I cannot turn the knob manually to get it to stay in the unlocked position with the throw retracted
The first time i did it i screwed up the code and had to do the Reset. Maybe try that? There's a tiny button. I show how to reset it at 5:50 in this video: ruclips.net/video/NS5iIpjAxrc/видео.html
It doesn't let you set a basic code such as 1234, 0000, etc... it must be a unique code that's the only thing you did "wrong". I. Watching just because I like supporting people that help others with things like this. Ive been an electrician since 2005 and i have installed bwsocally anything that needs power connected as well as wiring entire custom homes. I don't know why but I have a love and hate relationship woth electrical. Vehicle electrical being the bane of my existence. Good day ...
Damn where the hell were you 3 days ago, and NEVER EVER use those shitty batteries in a lock like that, use energizer, trust me I know they last longer
Not very smart door lock. It seems simple in 2023. I have high expectations for door lock like opening with phone or card connectivity without taking out your phone from your pocket. Like keyless car entry. And to add fingerprint and keypad for cases your phone is unavailable. Connecting it with wifi and unlocking with single tab from app or generating temporary access
Not quite understanding this gibberish you wrote but if you want those added feature, you'll have to spend more than $39 DOLLARS! There are $400 deadbolt locks that do all the things you want. Go lay out the cash and you'll be able to hook up your phone, wifi and network - plus if you treat it nice, it will give you a free reach around whenever you enter the master code. If you're a cheap bastard like me, you want an electronic lock that will work and be cheap. This is it.
😂 well, it depends on your needs and budget. BUT I don’t think the features that I have mentioned are hard to make or expensive. I found a lot but I’m having issue with the compatibility. Different dimensions that won’t fit on our door standards in Saudi Arabia. Can’t wait to get rid of all physical keys on the world! Haha and tell our grandsons that in the past you have to carry piece of metal to unlock doors
TEEHO Keyless Entry Door Lock .................................... amzn.to/3VZtSN2
HuTools Keyless Deadbolt ............................................. amzn.to/3ZuKkrz
Fingerprint Keyless Door Lock ....................................... amzn.to/3X3p2j2
I am a recent widow and found that my dead bolt keys had been comprised. I bought these locks and used your video to install two of them. Great video and very helpful. Thank you so much
Thank you for the demonstration. I have learned a lot more from your channel than any other channel there is for this program.
This thing was a total nightmare trying to get the screws lined up. The ends also seemed stripped. I returned it. Thank you. It was a great demo. 👍
Thanks man, I was getting pissed and had no idea it had to be a 4 digit code which solved the issue
We just installed this exact lock. The only thing that needs to be added is that there is a step where you place 3 batteries, press a reset button with a tool in the kit and insert the 4th battery while doing that. If you miss this step, the lock won’t work.
Otherwise super helpful!
This was an AWEOME demonstration video! Thank you so very much!
Thank you so much for making this video. It helped me so much yesterday as I installed this lock with zero problems thanks to you.
This was a very helpful video! Thank you!
Thanks dude ! Saved me loads of time , good instructions
Thanks for making the video, it was a great help to me as I can always make things more difficult than necessary! Much appreciated!
Great vid bro straight to the point, thanks a bunch
Thanks for sharing your video. All will work out perfectly when mines arrives tomorrow
Thanks again 🙏🏾💪🏾
You a life saver 😅
Thank you this was helpful.
Thank you, I am going to install now. ALL BY MYSELF!
Thanks, your instructions Hava been so helpful.
Video was great! Thank you!!!
Very helpful. Thank you.
thank you!! you were so helpful
Great video thanks, subscribed 🙏🏻
This was a great and helpful video but I'm having issues with the lock not coming out unless i manually use my key. When i try locking with just holding a button down like you say, you can hear it trying to lock but it won't come out. It's like it's stuck so i loosened the screws and it's still not coming out to lock. It's almost as if something inside is not catching to push it out. Any ideas what it could be? I'm just lost 😢
I know when our batteries were low, the deadbolt wouldn't extend. But when we changed batteries it worked.
Also, does the deadbolt come out if the door is open? If it extends when the door is open, but not closed, maybe it's not aligned perfectly?
I would start with fresh batteries, see if that makes a difference. Then maybe try to re-align it with the door frame.
Other than that, i'm not sure. Maybe it is something inside. Maybe check the video at 1:20 and make sure that's all correct
We recently had the same problem. When we were installing ours, the key was inside. If this is your first install, make sure that everything is in unlocked position and no key inside while the installation.
0:10 0:10 😊😊😊
This worked for me. Thanks
Great, finally i was able to rekey my lock. Thank you👍👌👏👏👏
Definitely appreciate thar video tutorial
How do you change the mechanics orientation. I have left handle door and it’s only rotating for a left hand door.
Done. Thanks for the help.
Thankyou so much
2 questions
1. Is it still working well?
2. Because it looks like it's cold where you are it's cold where I am does it work correctly in 17 to 20°
Yes still works fine.
No issues with the cold.
Last year there was an issue where it was "slow" or something. But it was just dying batteries. Once we changed them it's worked great.
@DaveWirth great thanks 😊
Thanks couldn't figure out how to unlock
Thank you, helps so much
Awesome..thank you
This was so helpful. Thank you!
Supposedly upon initial power up it detects the orientation. Before installation I was able to rotate the lock both left and right by forcing it against the motor inside. Then it went both ways. After install and bat install it just changed to work how installed. Maybe a full reset would work.
Good video!
Great video very helpful indeed sir
Thank you
Good video. Thanks for sharing.
What is size of deathball you mounted side wall of the wall
Any idea why after I insert the batteries it throws out the throw in the locked position, but then I cannot turn the knob manually to get it to stay in the unlocked position with the throw retracted
Mine won’t unlock or lock, it flashes green and red and nothing
The first time i did it i screwed up the code and had to do the Reset. Maybe try that? There's a tiny button. I show how to reset it at 5:50 in this video: ruclips.net/video/NS5iIpjAxrc/видео.html
thanks for the video. easy once you see it done. God i hate (poor) instructions
You cant put consecutive numbers it sais it on the page before ❤
You forgot to put the tiny black screw in the bottom hole under the turn knobs.
I forgot to press the 1 now I have trouble programming. How do I start over
You need to use the metal pin/reset key. Here's how: ruclips.net/video/NS5iIpjAxrc/видео.html
please send me the Instalation Manual, i lost mine, i have a TICONN Keyless Entry Door Lock Deadbolt with Keypad, i think is the same
Is there an app for this lock?
No, it's not wireless/wifi/bluetooth.
It doesn't let you set a basic code such as 1234, 0000, etc... it must be a unique code that's the only thing you did "wrong". I. Watching just because I like supporting people that help others with things like this. Ive been an electrician since 2005 and i have installed bwsocally anything that needs power connected as well as wiring entire custom homes.
I don't know why but I have a love and hate relationship woth electrical. Vehicle electrical being the bane of my existence. Good day ...
I need help. Mine locks but won't unlock
Make sure the deadbolt isn't pinched. If there's pressure on it, the motor isn't strong enough to pull the deadbolt back.
Installed a high tech lock next to a glass window, it defeated the purpose.
You forgot to reset the lock under the fourth battery
Damn where the hell were you 3 days ago, and NEVER EVER use those shitty batteries in a lock like that, use energizer, trust me I know they last longer
Pushing the button for 2 sec does not lock. What am i doing wrong?
Not sure, it's always locked for me, just holding that top button in. That's what the instructions say also.
Not very smart door lock. It seems simple in 2023. I have high expectations for door lock like opening with phone or card connectivity without taking out your phone from your pocket. Like keyless car entry. And to add fingerprint and keypad for cases your phone is unavailable. Connecting it with wifi and unlocking with single tab from app or generating temporary access
Not quite understanding this gibberish you wrote but if you want those added feature, you'll have to spend more than $39 DOLLARS! There are $400 deadbolt locks that do all the things you want. Go lay out the cash and you'll be able to hook up your phone, wifi and network - plus if you treat it nice, it will give you a free reach around whenever you enter the master code. If you're a cheap bastard like me, you want an electronic lock that will work and be cheap. This is it.
😂 well, it depends on your needs and budget. BUT I don’t think the features that I have mentioned are hard to make or expensive. I found a lot but I’m having issue with the compatibility. Different dimensions that won’t fit on our door standards in Saudi Arabia. Can’t wait to get rid of all physical keys on the world! Haha and tell our grandsons that in the past you have to carry piece of metal to unlock doors