@@TheDemmer21 It looks like an incorrect installation. Reset the lock. Next, remove the interior assembly from the door and reinstall it. Make sure the Thumb Turn is set in the vertical position and the latch bolt retracted while reinstalling it. Now you can program the lock, starting with the door handing detection process.
Good job! The instructions that came with it was very complicated. This helped a lot! You explained everything very well. Got mine all set up half of the duration of this video. Thank you!
Anyone else having an issue with this lock resetting on its own? I’m constantly needing to reprogram. Unfortunately this happens at random times. The batteries have been replaced but continues to reset.
@@PeytonPorter-y5n It looks like the lock isn't installed correctly. Remove the interior assembly. Then reinstall it and make sure the Thumb Turn is set in the vertical position and the latch bolt retracted while reinstalling it. Next, reset the lock and perform the door handing detection. It should work fine now.
I was messing with mind before I found your video… is there a way to reset the lock to “baseline/out of box” and start over? I don’t know my programming code. Thank you for any help.
Hi there, If you're doing everything correctly yet your code isn't working, check the installation. It looks like the Thumb Turn wasn't set in the right position during installation. To fix this, remove the interior assembly from the door. Then reinstall it and make sure the Thumb Turn is set in the vertical position and the latch bolt retracted while reinstalling it. Next, reset the lock and perform the door handing detection process. This should fix the problem. Note: Change the default Programming Code (0000) and delete the default User Code (1234). You can add new User Codes.
Yes. Follow these steps to mute the beep sound: 1. Enter your Programming Code and press the EZSET button. 2. Press 7 and press the EZSET button. You should see a green flash and hear a long beep, meaning silent mode is activated. Test it to confirm.
Hi there, It sounds like an incorrect installation/door handing detection. To fix this, remove the interior assembly of the lock. Then reinstall it and make sure the Thumb Turn is set in the vertical position and the latch bolt retracted while reinstalling it. Next, reset the lock and perform the door handing detection. 4:26 How to Reset the Lock 0:05 Door Handing detection
Hi there, To confirm your door handing, enter the default Programming Code (0000), and press the Lock/Unlock button. Next, press 0 and press the Lock/Unlock button. The latch bolt should extend and retract to learn the door orientation. Try watching the video from the beginning... I've demonstrated how to determine left/right hand, and other programming.
This video was a HUGE help. Our builder threw away the box so we had no clue how to program our lock. Thank you!
Glad it helped!
Thanks that helped alot. I seemed to have lost my instructions and wanted to remove a code.
@@averywinford3381 You're welcome!
Your video is so much better than the instructions that it comes with. Thank you.
@@Danny2422 You're welcome!
The actual directions were terrible. 1 run through this video and I got it. Thank you!
You're welcome!
Exactly what I needed, perfect instructions, thanks.
You're welcome.
Reliability need to pay you or sponsor you very clear instructions 👍
Glad it helped! And thank you for the support.
You are awesome!!! Thank you so much!!!❤ May God richly bless you!
You're welcome! Bless you too... 🙏
I have everything programmed but when I just hit the unlock button from outside it unlocks the door with no code needed?
@@TheDemmer21 It looks like an incorrect installation. Reset the lock. Next, remove the interior assembly from the door and reinstall it. Make sure the Thumb Turn is set in the vertical position and the latch bolt retracted while reinstalling it.
Now you can program the lock, starting with the door handing detection process.
Good job! The instructions that came with it was very complicated. This helped a lot! You explained everything very well. Got mine all set up half of the duration of this video. Thank you!
@@shoeprn3585 You're welcome!
Thank you very much. You helped me tremendously.
Glad I could help!
Anyone else having an issue with this lock resetting on its own? I’m constantly needing to reprogram. Unfortunately this happens at random times. The batteries have been replaced but continues to reset.
Mine is doing the same were you able to fix it?
Great job explaining sir thank you very much
You're welcome.
You are amazing sir!
@@josiahmann6379 Glad to be of help!
Thanks! Your a lifesaver!
@@arziestanley9747 You're welcome!
Thank you very much. Your video was very helpful
Glad to be of help!
Thank you for this video. The direction in the package were awful.
@@tabithaharriger Glad it helped!
you’re the best!
Thank you! Glad you found it helpful!
Why do I get three flashing lights everytime I try typing in the programming code. Brand new purchase and install
I press 0000 unlock/lock and it flashes green, and before I press 0 unlock/lock It starts flashing red three times
@@PeytonPorter-y5n It looks like the lock isn't installed correctly. Remove the interior assembly. Then reinstall it and make sure the Thumb Turn is set in the vertical position and the latch bolt retracted while reinstalling it.
Next, reset the lock and perform the door handing detection. It should work fine now.
Perfect thank you!!
@@Zionbutler8 You're welcome.
Thank you so much 😅
You're welcome!
I was messing with mind before I found your video… is there a way to reset the lock to “baseline/out of box” and start over? I don’t know my programming code. Thank you for any help.
@@gulfbreezescapes4429 Yes. You can reset it to factory defaults. I've demonstrated how to do that in this video -- 4:26
I saw in video. became impatient. lol. thx!
@@gulfbreezescapes4429 You're welcome!
I have done all the steps, but my user code doesn’t work. I’ve reset the keypad over and over. I don’t know what I’m doing wrong.
Hi there,
If you're doing everything correctly yet your code isn't working, check the installation. It looks like the Thumb Turn wasn't set in the right position during installation.
To fix this, remove the interior assembly from the door. Then reinstall it and make sure the Thumb Turn is set in the vertical position and the latch bolt retracted while reinstalling it.
Next, reset the lock and perform the door handing detection process. This should fix the problem.
Note: Change the default Programming Code (0000) and delete the default User Code (1234). You can add new User Codes.
@@SmartTechVille I just got it to work. Not sure what I was doing wrong. Thank you so much for your prompt response!
Thanks you !
You're welcome.
Is there a way to mute the beep sound?
Yes. Follow these steps to mute the beep sound:
1. Enter your Programming Code and press the EZSET button.
2. Press 7 and press the EZSET button. You should see a green flash and hear a long beep, meaning silent mode is activated. Test it to confirm.
muchas gracias me ayudo muchisisisisisimo
You're welcome!
Key will only come out when unlocked?
Where can I buy this one at? Does anyone know?
Hi there,
You can get it at Lowe's or on eBay.
my lock is unlocking without code, and locking with the code. Its backwards
Hi there,
It sounds like an incorrect installation/door handing detection.
To fix this, remove the interior assembly of the lock. Then reinstall it and make sure the Thumb Turn is set in the vertical position and the latch bolt retracted while reinstalling it.
Next, reset the lock and perform the door handing detection.
4:26 How to Reset the Lock
0:05 Door Handing detection
Thank you. I didn’t expect such a fast reply!😊
I am having troubles programming. How do I confirm left or right hand and what do I need to do
Hi there,
To confirm your door handing, enter the default Programming Code (0000), and press the Lock/Unlock button. Next, press 0 and press the Lock/Unlock button. The latch bolt should extend and retract to learn the door orientation.
Try watching the video from the beginning... I've demonstrated how to determine left/right hand, and other programming.
Got it. Thanks
Hey I did the other steps before determining the left or right hand position and I can't do anything now what should I do
@@jberry2061Reset the lock. Then start with the door handing detection.
4:43 How to Reset the lock.
Hi. I reset my lock but it won't let me start over.