I‘ve mounted my new CS-6 under my T-Rex Tonetrunk and fits perfect ! It runs 12 pedals at the moment without any problems or noise issues. Greetings from Germany
I have a cs7 and it completely fixed my noisy pedalboard. However, I got the rockboard tres and unfortunately it doesn't fit below. Lucky me, I got a splitting cable to daisy chain a pair of overdrives so I'll be getting this and hopefully it will be nice and clean down there. I'm taking for granted it will be as noiseless as my cs7. 😊
I already bought 1 spot CS6 power supply and i really hope in the future true tone will Invent another low profile power supply like CS 6 and more outlets.. I'm happy and love my CS 6 power supply, really hope there's another low profile power supply like CS6 in the future and i will bought it🙂
Hi, I'm confused. You said I can run 6 Strymon pedals independently isolated. So for example, I need to run a Flint, El Capistan and Ola (requires 250mA each). Obviously I could use the two 9v 500mA outs, but the third one? the 9/12v 200mA outs works for that? If I use them at 9v how much mA i can get? All outs povides 500mA at 9v and the amperages refers to the maximum voltage? Thanks in advance and sorry for my poor english!
We will look at that. In the meantime, plug the CL6 (green end) converter into the HX, then the CYR (red end) into that, then a regular cable from the CYR into one of the high mA outputs on the CS6. Zac
Hi there ! What is the best way to mount the CS6 under a pedaltrain Classic Jr board. I know the CS6 is more for flat boards but i needed my new setup to be light but compact and big enough for expression/wah pedal. The Metro wasn't deep enough and the next board up that could do the job was the Classic Jr. The CS6 is more than enough for my power needs, but just wanted to know your thoughts please Zac on mounting it.
@@TruetoneFX Hi there ! Yes i see just got the CS6 today and figured it out.I think its awesome the way you can screw it underneath. Hey dude thanks for the reply and great channel.😎
You would need to set an output to 12v, and then purchase our TVD voltage doubler cable. It will then make the single 12v output, 24v. You will also need to use the CL6 converter, that is included with the CS6 to change the polarity and size of the plug. Zac
I'm a new for this kind of stuff because i use multi effect pedal all this while, and I'm curious about how powerful is this power supply because i want to buy a new power supply to powering my pedals like strymon sunset dual overdrive, mxr analog carbon copy delay, mxr chorus with 18v dc.. I'm still searching for a new power supply, and how much this 1 spot cs 6 pro can powering any pedals?
The template to screw the CS6 doesn't align properly! I have two sets of holes in my brand new board and only have the CS6 attached with two screws (that don't sit flush!!!) Great product but needs work on the template and the screws being used.
Really looking at buying a 1spot pro but not sure which model. Can I use a daisy chain in one of the isolated outputs to power multiple low current pedals?
Thanks for the video! I've been daisy chaining my pedals with two 1 spots so far and would like to upgrade my setup with a CS6. I've got a question though. When I am at the practice studio I've got very little humming but when I am back home - same setup- the hum is much louder. Would a PSU correct the hum regardless of the socket it is connected to?
The Pro should be quieter, but It could be the AC wiring at your home. You might want to look into this www.amazon.com/Ebtech-Hum-Plug-Style-Eliminator-Cleaning/dp/B07W682STV/ref=sr_1_2?dchild=1&gclid=Cj0KCQiA6t6ABhDMARIsAONIYyzrcEtRkfOb2Ogn1w4a6y3jhJoYRr-oZF87M5H8o3J2_w_H_gKbsLcaAkYmEALw_wcB&hvadid=490238627248&hvdev=c&hvlocphy=9052900&hvnetw=g&hvqmt=b&hvrand=8903935061607785894&hvtargid=kwd-534120909&hydadcr=24663_13446936&keywords=ebtech+hum+x&qid=1612201563&sr=8-2&tag=googhydr-20
Yes. Set one of the outputs to 12v, then you will need to purchase our TVD Voltage Doubler, and then use the included CL6 adaptor to have the correct polarity and tip size.
i have an interest but i'm bothered by the claim of "magic" regarding your power handling ability. if it magically will handle over an amp why wouldn't you guarantee it that way?
Always happy with every product TrueTone makes. We carry the 7 and 12, looking forward to getting the 6. Awesome people at this company.
Thank you so much for carrying our products in your store!
I‘ve mounted my new CS-6 under my T-Rex Tonetrunk and fits perfect !
It runs 12 pedals at the moment without any problems or noise issues.
Greetings from Germany
Fantastic! Thank you. Zac
I have a cs7 and it completely fixed my noisy pedalboard. However, I got the rockboard tres and unfortunately it doesn't fit below. Lucky me, I got a splitting cable to daisy chain a pair of overdrives so I'll be getting this and hopefully it will be nice and clean down there. I'm taking for granted it will be as noiseless as my cs7. 😊
Just Ordered it and I am Super exCiteD to try it out with My PedalTrain Metro!!!
Fantastic!
I already bought 1 spot CS6 power supply and i really hope in the future true tone will Invent another low profile power supply like CS 6 and more outlets..
I'm happy and love my CS 6 power supply, really hope there's another low profile power supply like CS6 in the future and i will bought it🙂
You can safely daisy chain analog pedals off a single output on the CS6. Also, we have the CS7 and CS12 for pedalboards with more pedals.
I love your products but cs7 and cs 12 a bit big for me at this moment, but i will bought them if i got 15 pedals in the future🙂
Get a daisy chain, MC5 or MC8, and power your analog pedals off that.
nice piece of kit - I want one
just ordered it at Thomann. This will power my Line6 HX stomp and my Line6 G70 wireless DI unit nicely under a pedaltrain Nano.
What cables do you need to power the line 6 hx effect ?
The converters you need are included with the CS6. They are the CL6 and CYR converters. Zac
Awesome power supply have this on my pedalboard 🤘🔥🤘 so quiet as well … love it ❤️
Rock on!
@@TruetoneFX right on 🤘🔥🤘
Hi, I'm confused. You said I can run 6 Strymon pedals independently isolated. So for example, I need to run a Flint, El Capistan and Ola (requires 250mA each). Obviously I could use the two 9v 500mA outs, but the third one? the 9/12v 200mA outs works for that? If I use them at 9v how much mA i can get? All outs povides 500mA at 9v and the amperages refers to the maximum voltage?
Thanks in advance and sorry for my poor english!
You can run a Strymon pedal off any of our 9v outputs on the CS6. The outputs can put out more than what is stated. Zac
Can you make a video showing how to power the HX effects with the Cs6?
We will look at that. In the meantime, plug the CL6 (green end) converter into the HX, then the CYR (red end) into that, then a regular cable from the CYR into one of the high mA outputs on the CS6. Zac
Hi there ! What is the best way to mount the CS6 under a pedaltrain Classic Jr board. I know the CS6 is more for flat boards but i needed my new setup to be light but compact and big enough for expression/wah pedal. The Metro wasn't deep enough and the next board up that could do the job was the Classic Jr. The CS6 is more than enough for my power needs, but just wanted to know your thoughts please Zac on mounting it.
You can mount it under a Jr.
@@TruetoneFX Hi there ! Yes i see just got the CS6 today and figured it out.I think its awesome the way you can screw it underneath. Hey dude thanks for the reply and great channel.😎
Can it power an EHX Q-Tron+? That pedal needs 24V. If so, would it need special cables to do it, or just what's included?
You would need to set an output to 12v, and then purchase our TVD voltage doubler cable. It will then make the single 12v output, 24v. You will also need to use the CL6 converter, that is included with the CS6 to change the polarity and size of the plug. Zac
Thanks!
Will it power a shure gldx wireless receiver pedal with tuner built in takes 12 volts
It will power it fine even in 9v mode. The manual indicates 9-15 volts and 250mA.
I'm a new for this kind of stuff because i use multi effect pedal all this while, and I'm curious about how powerful is this power supply because i want to buy a new power supply to powering my pedals like strymon sunset dual overdrive, mxr analog carbon copy delay, mxr chorus with 18v dc..
I'm still searching for a new power supply, and how much this 1 spot cs 6 pro can powering any pedals?
The template to screw the CS6 doesn't align properly! I have two sets of holes in my brand new board and only have the CS6 attached with two screws (that don't sit flush!!!) Great product but needs work on the template and the screws being used.
We are sorry this happened. We are looking at this. Please email us directly support@truetone.com
is CS6 works for HX Stomp? the included adapter is too big, need replacement for it
The CS6 will power it by using the included CL6 and CYR adaptors. Zac
awesome! definitely getting CS6 for it now, thanks for the answer!
Really looking at buying a 1spot pro but not sure which model. Can I use a daisy chain in one of the isolated outputs to power multiple low current pedals?
Yes you can!
Will this fit under the pedaltrain nano+? without having to change the rubber feet?
It will fit without any modification
so, the 1 spot CS7 doesn't fit a metro20?
Correct. Sorry for my mistake. Zac
Thanks for the video! I've been daisy chaining my pedals with two 1 spots so far and would like to upgrade my setup with a CS6. I've got a question though. When I am at the practice studio I've got very little humming but when I am back home - same setup- the hum is much louder. Would a PSU correct the hum regardless of the socket it is connected to?
The Pro should be quieter, but It could be the AC wiring at your home. You might want to look into this www.amazon.com/Ebtech-Hum-Plug-Style-Eliminator-Cleaning/dp/B07W682STV/ref=sr_1_2?dchild=1&gclid=Cj0KCQiA6t6ABhDMARIsAONIYyzrcEtRkfOb2Ogn1w4a6y3jhJoYRr-oZF87M5H8o3J2_w_H_gKbsLcaAkYmEALw_wcB&hvadid=490238627248&hvdev=c&hvlocphy=9052900&hvnetw=g&hvqmt=b&hvrand=8903935061607785894&hvtargid=kwd-534120909&hydadcr=24663_13446936&keywords=ebtech+hum+x&qid=1612201563&sr=8-2&tag=googhydr-20
Great! Can i run the 24v EHX Poly Chorus with the CS6?
Yes. Set one of the outputs to 12v, then you will need to purchase our TVD Voltage Doubler, and then use the included CL6 adaptor to have the correct polarity and tip size.
@@TruetoneFX Thank you!
looking to buy this tonight or tomorrow but I have the HX Stomp and Strymon Mobius and this will out of the box power these up right?
The CS6 will absolutely power those!!!
You must use 2 of the supplied converters to power the HX. The CL6, and CYR.
it comes with the cable inside purchase right? I just ordered one today.. Or am I buying extra cables?@@TruetoneFX
They come with the CS6
Truetone awesome!!! So excited!! Thank you team...
Will this mount underneath a Pedal Train Novo? And will the Velcro simply go over the screws?
You can, but you might want to use a CS7 here.
@@TruetoneFX I did wonder that. I already have a voodoo labs pp2+ just looking to extend it.
@@TruetoneFX What are the advantaged of the CS7 over the CS6?
It has brackets for angled boards, like the angled Pedaltrains, and it has a 7th output.
Will this CS6 mount under the pedaltrain nano+? Thanks
yes!
@@TruetoneFX any ideas on how to raise the pedal train nano? Do I have to worry about overheating?
How did the hx effects work out? Any problems?
No problem at all!
i have an interest but i'm bothered by the claim of "magic" regarding your power handling ability. if it magically will handle over an amp why wouldn't you guarantee it that way?
Sorry you were bothered. Has to do with certification
can you daisy chain the 9v?
Yes! Just don't daisy chain digital pedals like Line 6, Strymon, Eventide. They want to have their own power.
@@TruetoneFX Came here looking for this question yay.