I really like your review my friend :). Compact and very powerful tactical Convoy S21B. It uses 8A and SFT40 LED. In my imagination, I like the design of Nitecore MH12GTS but the model This is no more. Try to imagine, If Convoy makes a tactical flashlight with the same design as the MH12GTS nitcores, it's just a little bigger because it uses a 21700 battery, uses an 8A driver and LEDSFT-40. The Nitecore MH12GTS model before This uses an 18650 battery.
Weirdly Simon released the S21B before the S21A. I bought an S21A thinking the difference was only cosmetic. I agree the S21B is definitely a better design even if I prefer the look of S21A (which comes in multiple colours). I ordered a Pioneman K21X Xhp70.2 because I wanted that LED in a small package.
I get your point. Unfortunately I like the S2+, S21A design more. I undestand that in the end it's all about the beam not the host. After all we use them to light up stuff.
The heat transfer is better on the S21B due to the integrated shelf but I think the S21A will be fine for those who don't plan on using 100% mode a lot.
Great comparison video! I followed your great advice to get a S21 with XHP50.2 for cycling! Simon sent it very fast, at the beginning of his holidays, but the cycling lens was not installed (but 4 are in the package). I searched the internet for installing a (cycling) TIR for S21A, could not find good advice (only S2+), so I tried myself: I removed the white plastic gasket, the op reflector and the glas lens. I kept the black o-ring in the light, put the reflector in and screwed the pill back into the S21A. Now the o-ring seems to be not fixed properly, I already changed it. But overall I think it is not the best way to do it. How do you install a lens in the S21A? Which parts to remove or to keep? Thanks in advance! Greetings, GS :-)
In s21a, it's quite difficult as I said. I remove the gasket and the reflector. When screwing in the pill, if it is too much, this would damage the glass lens and the o-ring. If your o-ring is old or worn out, it may come out of its place when screwing in the pill. Thanks for watching and sharing sir 😊.
Thank you! :-) Will the pill unscrew itself if there is a spring on the driver? Or does it only happen with this solid column on the driver? In my S21A the pill unscrewed itself while riding - like you explain in the video. It has the solid column on the driver for XHP50.2. Yesterday I asked in BudgetLightForum but I decided to ask you if you have cycling experience with S21As with different drivers. :-) Somebody wrote in BLF that a S2+ with pill and spring on the driver works for him. :-D
@@gs78798 It unscrew itself even with spring on the driver sir. That's why I like S21b more than s21a. Even the flashlight with no pill may experience this problem. My Mantaray c8.2, its brass ring that tighten the driver can unscrew itself when riding rough terrain. So it's important to check carefully. Thanks for watching sir 😊.
@@weerapatkiatdumrong Thank you so much for sharing! Am I allowed to copy your comment to BLF? :-) This helps me so much to make a decision! I will not even try to modify the S21A. (Perhaps later just for fun.) But instead buy a new bike light that's reliable for riding in the dark. Thank you! Thank you! Thank you! ☺️
I love the K21 design. Might get one in the future. I hope it supports 22mm drivers so that I have the option to try the high CRI variants of the XHP50.3 HI or XHP70.3 HI.
@@weerapatkiatdumrong here's what I did with mine. I got the XHP70.3 HI variant. It's very powerful for something I can easily carry. Lol ruclips.net/user/shortseFnuRXBgO1M?feature=share
I try to find it but it is already sold out. I think you have to buy it from the shop in Aliexpress. But now it's on Chinese New Year. Thanks for watching sir 😊.
In my opinion Tactical more preferable can used both batteries 21700 n reducer tube for 18650,review more about tecnical liked this could open minds, how it's work, n functions for each parts of a flash lights. Thanks Sir Weerapat K. Mbu
Do you know which emitters have the driver with a spring? I have s21b with sft-40 and it has a spring so I can use protected 21700 cells. I also have another s21b with xhp50.3 and that has a “nub” not a spring, so protected cells will not fit. I want pioneman with xhp70.3 but i only use protected cells (i had bad luck with unprotected cells in the past), and it looks like it doesn’t have the spring driver.
Hello sir. Please have a look at this shop sir. a.aliexpress.com/_oFqjo8y It sells driver similar to convoy and with springs. Mode is simple with memory function. Or try to remove a nub and replace it with a proper spring. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Hello sir. To be honest, I am not sure sir because I haven't tried that. I will find the right driver instead of doing that sir. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Xin chào thầy! Tui mới có được Convoy S21B (CULPM1.TG.) trình điều khiển :12 nhóm màu đỏ,tui bối rối vì không thể chuyển đổi nhóm của nó được,mặc dù có bấm nhẹ 20 lần khi đèn sáng ,làm rất nhiều lần mà vẫn không được,chỉ 0,1.-3.-30.-100.Không có nhấp nháy, không kiểm tra pin được. Xin thầy dành cho ít thời gian chỉ giáo giúp tui.Mong thầy phản hồi Thank you! thầy thật nhiều.Tui biết video này đã có lâu rồi,ngoài thầy ra cũng không biết hỏi tư vấn của ai nữa.❤👍
Hello sir. Turn on. Half press about 10 times of more. When it shows the first buzz, tap the button lightly. Then wait for the mode you want sir. If you want mode 5, wait for the five blinks then lightly tap the button immediately. Try it sir. If you can't, there's might be a driver problem. Thanks for watching and your support sir. 😊🙏
@@weerapatkiatdumrong.Thanks.Bạn phản hồi rất nhanh. Tui không làm được như bạn chỉ dẫn chắc driver bị lỗi rồi,tui đã liên lạc với người bán hàng trên Shopee . Chờ họ giải quyết.Một lần nữa xin cảm ơn bạn thật nhiều. ❤❤
I really like your review my friend :). Compact and very powerful tactical Convoy S21B. It uses 8A and SFT40 LED. In my imagination, I like the design of Nitecore MH12GTS but the model This is no more. Try to imagine, If Convoy makes a tactical flashlight with the same design as the MH12GTS nitcores, it's just a little bigger because it uses a 21700 battery, uses an 8A driver and LEDSFT-40. The Nitecore MH12GTS model before This uses an 18650 battery.
That would be a really powerful tactical light sir. Thanks for watching sir 😊. Please subscribe 🙏.
@@weerapatkiatdumrong I have subscribed to your channel for a long time,my friend :)
@@Refaim.04 Sorry. I can't remember sir. Thanks for your support sir 😊🙏.
@@weerapatkiatdumrong It doesn't matter, anyway I sometimes change the avatar picture and also the name.☺️☺️
Weirdly Simon released the S21B before the S21A. I bought an S21A thinking the difference was only cosmetic. I agree the S21B is definitely a better design even if I prefer the look of S21A (which comes in multiple colours).
I ordered a Pioneman K21X Xhp70.2 because I wanted that LED in a small package.
You will like k21x xhp70.2. Super powerful in a compact size. Thanks for watching sir 😊.
I get your point. Unfortunately I like the S2+, S21A design more. I undestand that in the end it's all about the beam not the host. After all we use them to light up stuff.
Thanks for watching sir 😊.
The heat transfer is better on the S21B due to the integrated shelf but I think the S21A will be fine for those who don't plan on using 100% mode a lot.
@@android584 Thanks for watching and sharing sir 😊.
Great comparison video! I followed your great advice to get a S21 with XHP50.2 for cycling! Simon sent it very fast, at the beginning of his holidays, but the cycling lens was not installed (but 4 are in the package). I searched the internet for installing a (cycling) TIR for S21A, could not find good advice (only S2+), so I tried myself:
I removed the white plastic gasket, the op reflector and the glas lens. I kept the black o-ring in the light, put the reflector in and screwed the pill back into the S21A. Now the o-ring seems to be not fixed properly, I already changed it. But overall I think it is not the best way to do it.
How do you install a lens in the S21A? Which parts to remove or to keep?
Thanks in advance! Greetings, GS :-)
In s21a, it's quite difficult as I said. I remove the gasket and the reflector. When screwing in the pill, if it is too much, this would damage the glass lens and the o-ring. If your o-ring is old or worn out, it may come out of its place when screwing in the pill. Thanks for watching and sharing sir 😊.
Thank you! :-) Will the pill unscrew itself if there is a spring on the driver? Or does it only happen with this solid column on the driver? In my S21A the pill unscrewed itself while riding - like you explain in the video. It has the solid column on the driver for XHP50.2. Yesterday I asked in BudgetLightForum but I decided to ask you if you have cycling experience with S21As with different drivers. :-) Somebody wrote in BLF that a S2+ with pill and spring on the driver works for him. :-D
@@gs78798 It unscrew itself even with spring on the driver sir. That's why I like S21b more than s21a. Even the flashlight with no pill may experience this problem. My Mantaray c8.2, its brass ring that tighten the driver can unscrew itself when riding rough terrain. So it's important to check carefully. Thanks for watching sir 😊.
@@weerapatkiatdumrong Thank you so much for sharing! Am I allowed to copy your comment to BLF? :-) This helps me so much to make a decision! I will not even try to modify the S21A. (Perhaps later just for fun.) But instead buy a new bike light that's reliable for riding in the dark. Thank you! Thank you! Thank you! ☺️
@@gs78798 Yes. No problem. Thanks for your support sir.😊
I love the K21 design. Might get one in the future. I hope it supports 22mm drivers so that I have the option to try the high CRI variants of the XHP50.3 HI or XHP70.3 HI.
K21x cau use 22mm driver sir. Thanks for watching sir 😊🙏.
@@weerapatkiatdumrong here's what I did with mine. I got the XHP70.3 HI variant. It's very powerful for something I can easily carry. Lol
ruclips.net/user/shortseFnuRXBgO1M?feature=share
Can you provide the link to buy Pioneman k21x locally in Thailand? Thank you sir!
I try to find it but it is already sold out. I think you have to buy it from the shop in Aliexpress. But now it's on Chinese New Year. Thanks for watching sir 😊.
@Weerapat Kiatdumrong thank you sir! Will wait few more days 🙂
Very interesting, thanks for making this video
Convoy is good and simple sir. Thanks for watching sir 😊🙏.
In my opinion Tactical more preferable can used both batteries 21700 n reducer tube for 18650,review more about tecnical liked this could open minds, how it's work, n functions for each parts of a flash lights. Thanks Sir Weerapat K. Mbu
Hello sir. Ok sir. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Excellent video as usual!
Thanks for watching sir 😊.
i have my s21b with xhp50.2 with a little scratch on the reflector, if i buy a reflector , do you think it will fit or does it need modification?
Buy a reflector for s21a or s21b. It fits well sir. Thanks for watching sir 😊.
Which S21B would you recommend for bike riding? With SST40 or other?
S21b sst40 or xhp50.2 sir. Thanks for watching sir 😊. Please subscribe 🙏.
@@weerapatkiatdumrong5000K or 6500K would be better for a bike?
@@dmitrybachinsky 5000k sir. Thanks for your support sir 😊🙏.
I like sofirn IF22
Me too sir. Thanks for watching sir. Please subscribe 😊🙏.
Do you know which emitters have the driver with a spring? I have s21b with sft-40 and it has a spring so I can use protected 21700 cells. I also have another s21b with xhp50.3 and that has a “nub” not a spring, so protected cells will not fit. I want pioneman with xhp70.3 but i only use protected cells (i had bad luck with unprotected cells in the past), and it looks like it doesn’t have the spring driver.
Hello sir. Please have a look at this shop sir. a.aliexpress.com/_oFqjo8y
It sells driver similar to convoy and with springs. Mode is simple with memory function. Or try to remove a nub and replace it with a proper spring. Thanks for watching and your support sir 😊. Please subscribe 🙏.
can you use 17mm driver with an adapter to 20mm for s21a?
Hello sir. To be honest, I am not sure sir because I haven't tried that. I will find the right driver instead of doing that sir. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Where do you get the TIR lens from to the S21B
Hello sir. You can ask convoy shop for these lens sir. They are for s21a and s21b. Thanks for watching and your support sir 😊. Please subscribe 🙏.
Xin chào thầy! Tui mới có được Convoy S21B (CULPM1.TG.) trình điều khiển :12 nhóm màu đỏ,tui bối rối vì không thể chuyển đổi nhóm của nó được,mặc dù có bấm nhẹ 20 lần khi đèn sáng ,làm rất nhiều lần mà vẫn không được,chỉ 0,1.-3.-30.-100.Không có nhấp nháy, không kiểm tra pin được. Xin thầy dành cho ít thời gian chỉ giáo giúp tui.Mong thầy phản hồi Thank you! thầy thật nhiều.Tui biết video này đã có lâu rồi,ngoài thầy ra cũng không biết hỏi tư vấn của ai nữa.❤👍
Hello sir. Turn on. Half press about 10 times of more. When it shows the first buzz, tap the button lightly. Then wait for the mode you want sir. If you want mode 5, wait for the five blinks then lightly tap the button immediately. Try it sir. If you can't, there's might be a driver problem. Thanks for watching and your support sir. 😊🙏
@@weerapatkiatdumrong.Thanks.Bạn phản hồi rất nhanh. Tui không làm được như bạn chỉ dẫn chắc driver bị lỗi rồi,tui đã liên lạc với người bán hàng trên Shopee . Chờ họ giải quyết.Một lần nữa xin cảm ơn bạn thật nhiều. ❤❤
@@kylam9874Hello sir. Yes, it's possible sir. I used to experience a malfunction driver. Thanks for watching and your support sir 😊🙏.
❤@@weerapatkiatdumrong