Would have liked to have seen what the deadband is in Auto mode and if it can be adjusted. ie if u had tried adjusting Heat & Cool target setting towards each other at what point would it stop changing or changing one start moving the other to maintain the deadband. (I’m assuming here that Cycle rate is how u adjust the differential)
Using the phone app, touch Settings (cog) at the top right of the display. Then touch System Settings and scroll down to Offsets. Touch either the Temperature or Humidity offset and use the slider to adjust the number of degrees or humidity percentage offset up or down to match your room thermometer or other reference device. After you have made the adjustment, click the back arrow button at the top to return to the settings menu where the offset adjustment value is displayed.
Don't buy it if you have a Rheem or a Rudd furnace, it won't work. You can register it and program it to work with your app but the heating and cooling will not turn on. I bought it and had to return it. And if you call Sensi they won't answer the phone, the recording just directs you to a website to try and figure out your problem on your own.
Works perfectly fine with my Rudd (Achiever 90 Plus) furnace and Rudd A/C, so perhaps the problem is in the thermostat wiring or the programming settings being used.
It didn't work with my model. I even had a HVAC tech come out and he told me the only one that would work was RUUD thermostat. Maybe your model is newer and the connections have changed. And by the way I bought a RUUD thermostat and was able to connect it myself and it works fine. Did you connect yours yourself or did an HVAC tech have to do it?
What is circulate fan on/off option for and what is the adequate percentage/time should be set to?
Excellent presentation.
Thank you.
Excellent information, my reason for viewing was to determine how to place the system on hold at a certain temperature while going on Vacation
Can the temperature be set in half degrees? Perhaps in celsius?
Do you have to schedule 4 times per day? Scheduling for a retired parent. They only need sleep and wake. . .
Hi how can I set up time in thermostat itself? Thnx
Would have liked to have seen what the deadband is in Auto mode and if it can be adjusted. ie if u had tried adjusting Heat & Cool target setting towards each other at what point would it stop changing or changing one start moving the other to maintain the deadband. (I’m assuming here that Cycle rate is how u adjust the differential)
Please tell me how can set the offset temperature.
Using the phone app, touch Settings (cog) at the top right of the display. Then touch System Settings and scroll down to Offsets. Touch either the Temperature or Humidity offset and use the slider to adjust the number of degrees or humidity percentage offset up or down to match your room thermometer or other reference device. After you have made the adjustment, click the back arrow button at the top to return to the settings menu where the offset adjustment value is displayed.
What can I do if my screen stays black after setting all of the wires in the correct spot?
Don't buy it if you have a Rheem or a Rudd furnace, it won't work. You can register it and program it to work with your app but the heating and cooling will not turn on. I bought it and had to return it. And if you call Sensi they won't answer the phone, the recording just directs you to a website to try and figure out your problem on your own.
Works perfectly fine with my Rudd (Achiever 90 Plus) furnace and Rudd A/C, so perhaps the problem is in the thermostat wiring or the programming settings being used.
It didn't work with my model. I even had a HVAC tech come out and he told me the only one that would work was RUUD thermostat. Maybe your model is newer and the connections have changed. And by the way I bought a RUUD thermostat and was able to connect it myself and it works fine. Did you connect yours yourself or did an HVAC tech have to do it?