I want spacer on my Tacoma than getting new rims, but what the worry I need to no if I do…I’ve been researching, I do off-roading is spacer safe to travel and off roading nothing crazy…I got 305/70/17 on my so 34s…what your opinion brother on it, the only thing I worry is the tires come out flying on high way lol
So you have a 2” lift in front only, 1.25” spacers and 265/75/16 correct? This is the exact setup I’m going for and I was concerned about rubbing. Have you noticed any? Have you taken it off road yet with this setup?
I put on the spidertrax 1.25 as well. No trimming. It's literally just mount the spacer on with the nuts that come with the spacers and then mount your wheels to the studs on the spacers. 83-85 ft lb torq on your torq wrench and you're all set. The nuts that come with the spacer are 1mm size down from the wheel nuts. totally worth it if you ask my opinion. better handling is noticeable for sure. If you use the red loctite to secure the nut on, you will have to torch it off, just use a very few drops of red or buy the blue loctite. I used the red, it's on there lol
Buy quality spacers aluminum 6061, make sure the bolts on the spacer arw quality. DONT GO CHEAP or you will become a meme!!! Do you research before anything. Spidatrax and Bora! BORA IS MADE IN 🇺🇸
So easy to do, but has someone else do it 😂. Truck looks good BTW.
Wanted to the same size, thanks for the video and it’s actually looks fantastic
Thanks yes
Super clean man!! I love how you called an impact driver "drill gun" too. 😅
lol yes thanks
That headlight smoke looks nice !
Thanks man I appreciate it
Same size I used. Debates this vs. 1.5”
It actually looks nice.
Thanks bro appreciate that
Came out very nice 👍😎
Thanks man I appreciate it
I’m planning on using the same setup but a 1.5 spacer. Do you think it will rub or I’ll need a 2.5 or 3 front level kit?
Looks great
We have same truck.do I have to do lift for wheel spacers?
I got the same ones ! Looks nice on my offroad
Yessssir
Lookin' good!!
Thanks buddy
Sweet truck
Thanks buddy!
I want spacer on my Tacoma than getting new rims, but what the worry I need to no if I do…I’ve been researching, I do off-roading is spacer safe to travel and off roading nothing crazy…I got 305/70/17 on my so 34s…what your opinion brother on it, the only thing I worry is the tires come out flying on high way lol
Nah spacers are bolted in place and so are your tiers. They won’t affect anything
Thanks bro
Stock lift what size the tire sir planing to make same set up
265/75/16
@@TheUnrestricted is this stock lift with 1.25 spacer sir ?
Think he said he had a lift & video too
what are those headlights?
So you have a 2” lift in front only, 1.25” spacers and 265/75/16 correct? This is the exact setup I’m going for and I was concerned about rubbing. Have you noticed any? Have you taken it off road yet with this setup?
No rubbing at all! Love how subtle it looks but how much different from stock it looks at the same time.
Haven’t gone off roading yet
@@TheUnrestricted I agree your truck looks great! Definitely gonna do the same with mine. Thanks for the response. Subscribed.
@@alphapatriot1776 thank you!
@@alphapatriot1776any update on how it is offroading?
Do you still have the spacers? How has it been?
yes good
Would these same ones work on a first gen 2003 tacoma?
Hm not sure
Is your truck a 4×4? & why is it when I go on the link through Amazon says something went wrong?
No it is not
Can that work without the lift ? Because I want to do 1.5 spacers on my stock rim 265/65/17
Tes
What's your lift kit?
Did you have spacers on all 4 tires?
Yessssir
Any vibration at certain speeds
No
Do you plan on going 285s at one point
Nah I feel like it’s too big for the truck
I go to the link and it says it doesnt fit my 2021 tacoma. Any help?
Do you notice a difference in the ride?
Not really tbh
Did they trim the wheels studs by adding those 1.25'' wheel spacers?
I put on the spidertrax 1.25 as well. No trimming. It's literally just mount the spacer on with the nuts that come with the spacers and then mount your wheels to the studs on the spacers. 83-85 ft lb torq on your torq wrench and you're all set. The nuts that come with the spacer are 1mm size down from the wheel nuts.
totally worth it if you ask my opinion. better handling is noticeable for sure. If you use the red loctite to secure the nut on, you will have to torch it off, just use a very few drops of red or buy the blue loctite. I used the red, it's on there lol
@@monomite6 Thank you. I will purchase those and try them out.
One and one fourth lmao...or a inch and a quarter
He did?
U still running the spacers are the holding up
Yeah, there great
@@TheUnrestricted did u get a wheel alignment afterwards
Honestly still haven’t, didn’t go too bad
Wondering if you even need to tho it’s prolly good
Yeah I don’t think I’m gonna
Were can order
Link in bio
Can you tell me size Please I have the same rims like yours thank you
Buy quality spacers aluminum 6061, make sure the bolts on the spacer arw quality. DONT GO CHEAP or you will become a meme!!! Do you research before anything. Spidatrax and Bora! BORA IS MADE IN 🇺🇸
Oh sick!
Spidertrax are made in the USA also.