Got Screwed by Little Old Lady on a Farm Brute Force 750 Valve Clearance check
HTML-код
- Опубликовано: 18 сен 2024
- Not good news on the Brute Force 750...
Music "Morning Blue" by Josh Woodward www.joshwoodward.com
Check out Finntrail Wading Gear at www.finntrail.com Use "Rob Farrow ATV" code for 10% discount! Best in outdoor gear!
Check out www.arrowatv.com/ for Awesome Can Am Outlander Aluminium Bumper Corners! These corners come with a Lifetime replacement should they break, just pay for shipping.
Please check out my other Channel Outdoor Rob / @outdoorrob for Adventure and Abandoned themed videos! Thanks!
Never seen you give up, you will call a friend and both of you will figure it out and she will live again. Cheers
Thanks Man! Haven't given up yet, just trying to figure out which bank to rob...
Thank you for sharing
Sorry that happened to you. People who live that way never really seem to get away with it, in the end. Something bad seems to always be around the corner and, when it happens, they hark back, instantly, to the moment that brought them to where they are.
Hopefully, you might find someone who needs one for parts and both you and the buyer will prosper 🤗🛐
🤗😎🇺🇲🙏
Thanks Mark! Gonna have to fix it, come too far to sell it for parts.
I felt your pain when you rapped your hand and when you found out it was a lump of XXXX !!
Thanks Man! LOL! Ya, think we've all done that working on these things.
Those intake valves have a tendency to start cupping after so much use with no adjustments. There's an easy way to check the timing chains on those to make sure that the timing hasn't slipped. You set the side you want to check at tdc and then take the tensioner out and then try to put it back on without resetting the tensioner. The amount that the tensioner sticks out is a good indicator of how much life the timing chain has. If it goes all the way in while fully extended then that's a for sure sign that the chain is stretched, if it's stretched most likely the timing could have slipped.
Thanks Man!
Ah man , that sucks.
After you rebuild all will be good , hope you getter done before the snow
Hopefully she'll be a good machine after the rebuild but we already have snow here, so hopefully it doesn't snow too much before I'm done. Thanks Man!
Sometimes your the pigeon...sometimes your the statue!😂
Keep us posted on this turd!
Usually I'm the statue LOL! Thanks Man!
Had a brute Force it was a lot of trouble every time something broke went back to Honda have never had a real problem
Nice! Thanks Chris!
Rob, I just remembered that there’s a guy down here in Louisiana that had to redo a Brute Force and he redid the carbs His channel is Alpha Pack Offroad
Thanks Man!
Too much fun. One of my pickups is running with a cracked head, five years so far with stop leak in it. Runs like hell and misses a bunch, but I can still get hay in, or haul a boat in out of the lake. Maybe you could get by with larger piston rings, new bearings and still have a toy.
Pistons, rings and valves and a bunch of Love...It's getting no Love from me. LOL! Thanks Fred!
@@RobFarrowATV Embrace the disaster, take off the muffler, tune rich and backfire until you have flames!
LOL!
Oh boy. I know how ya feel. I've thrown money at projects with same results.
Thanks Rob! Ya, these "Projects" always seem to take a wrong turn.
I just got a brute and it was running rough. Did a lot and found it to be the rear resistor cap for the plug
Good to know, thanks!
Man that’s a pain in the ass , after all that work …..I can’t believe you held your cool that long lol
LOL! Lots of beer!
This shit just does your Head in , hope you can get it fixed mate 👍👍👍
Thanks Man! Ya it's a pain for sure!
Sorry for the end result after all your efforts! Hopefully your time and effort doesn’t exceed its resale value in the end.
Thanks! I have no choice but to fix it...might be awhile though.
I’m about to go buy an 06 brute from an old lady, I’m scared now lol
LOL! And right you should be...
Just throwing this out there.. I believe some of the Brute Force engines had issues with extreme camshaft wear. I personally saw a cam that was missing almost 1/4 inch of the lobes.
Nice, thanks for the info. I used to have a 2008 Brute 850 and never had any issues...could be a different story with the 750's.
07 brute force 650 , piece of junk, never ran good , now just sitting and rotting , after $3000 into it I’m done
haha the lil old lady trick.. that sux
Thanks Man!
All in all good videos they forgot to tell you once you can am you can never go back lol
Ya, my Cam Am was alright but I really liked the old Brute 650 I had before...just bought a turd this time unfortunately! Thanks Norm!
It’s easily fixed!!!! It’s the carb. Choke plungers aren’t opening . 99.99% of your issues will root from this.
Your also adjusting the valves wrong. Always start on rear and move 270° to the front.
.006-.007 Intake. .008 exhaust.
Always use 2 feeler gauges when setting valves. Your simply cocking the valve rockers when setting the second valve.
Next. Search “ Vforcejohn kawasaki spark plug boot mod”
Cr7e Plug only. Cut back the Oem solid core wires.
To fix this would take 2-3 hours of labor and about 10.00 in parts.
Thanks Man!
Hey, but He did it from rear, what u mean wrong adjusting?
Excuse me, I have a question. My ATV BRUTE FORCE 750 has fuel leaking out of the exhaust and apparently it is leaking into the oil. What could be the problem???
Unburnt fuel coming out of the exhaust would be a cylinder that's not firing or firing intermittently. Fuel in the oil might mean crank seals are bad. Good luck!
I had one with low voltage from stator made it run bad. And one carbs needed rebuild/cleaning from sitting so long!!!!
Thanks Man! Ya, all kinds of issues with this one...we'll get it sorted out eventually!
Well at least it looks good. 😫
LOL! That's what I was thinking too...what a beautiful piece of shit. LOL! Thanks Randy!
HI. first of all congratulations for your videos, they are really interesting. I am writing to you from Italy, I have a 2009 KVF 750. Stunning car! but lately I replaced the petrol pump, and as soon as I reassembled everything, the FI light is flashing on the instrument panel..I can't solve the problem! would you have any advice for me? thank you and congratulations again.
Thanks Man! I'm not familiar with fuel injected machine. Maybe check the wire plugs to the injectors, could be loose or corroded. Same with the fuel pump wires and fuses. Try some dielectric grease on them. Good luck!
Great videos. 💯 (DON'T GIVE UP) That said, How much would a new Machine cost ya, especially up there in Canada?? At this point, if it was me. I'd just buy a brand new engine, and swap the two out. And after that it seems like you'd have awesome ATV, That you paid not nearly as much as to what a new 1 would run ya.
And if you end up going that route, just make sure you video it, and that way you can recoup some of your losses 📉
I'm a Gigantic fan of the Bruteforce as I own a 2018 also. So again I say, DONT GIVE UP. WINNERS NEVER QUIT, AND QUITTERS NEVER WIN. 💯
ID love to see this Machine in future rides and video contents.
Thanks Man! Ya, not giving up yet although I don't want to spend a pile of money on it either.
Another way would be to Find/Pick up another Full parts 750. That way you'd ready have on hand any additional parts that you may need now, plus more for future references. Maybe find 1 that was crashed, But still runs, Ect. ✅️
Very difficult to find one around this area without travelling to pick one up.
oh yeah valve job is always fun...;-)) guess preowners never care bout !? ;- ()
This whole ATV was junk but they kept it looking like it was workable. My big mistake but can't change that now, gotta carry on. Thanks izom!
I hate that you are having such trouble with that machine, maybe it won’t be to bad, but I know that it feels like you’re losing
When it's finally finished, every single thing will have been changed or fixed. This was a really bad machine that slipped by my experience. Brutes are usually known for their good reliability but this one is just a POS all the way around. Hopefully when we finish, it will be a much better machine. Thanks!
@@RobFarrowATV Rob as much as you have changed on it it’ll be a new one. Lol. If you’d asked me before you bought it and told me that it had carburetors I’d told you to leave it be. All I’ve ever heard about them was stay away from them. Back in 2006 I was looking for a SXS and was wanting one that was sorta sporty but also had a bed for doing work around my ranch and there was only 2 choices back then the Rhino and the T-Rex and I talked to what was a very honest salesman and he told me about the carb problem they had so I went with a Rhino which worked out great because we got a lot of laughs at my aunts expense because my told her I bought a Rhino and she wanted to know why I wanted such an big animal and what I was gonna do with it. Lol
I had an '08 Brute 650 for 9 years and never had an issue with it...
Mmm finger buster
I bought a 04 brute force from a guy. First quad, think it's a lemon.
It's hard to buy used ATV's, most of them have been really abused and not maintained. Hope you have better luck than I had.
Cannot be to upset about tires. Get some cheap ones but the engine is a pain. You went this far, might as well break her down and see what she needs. Good luck!
Thanks! Ya, gone too far to quit, just gotta suck it up I guess. The tires can wait until next year...takes a little while for the air to leak out. LOL!
Wow that sucks
Yep, it does LOL! Thanks Matt!
@@RobFarrowATV if it was a boat I’d fix it for you. Lol!
LOL! Thanks Matt! I've got a boat here that you can fix...
Chains dont go jus a galves asjus
Engine rebuild it turned into...
The little old lady didn't rip you off Kawasaki brute force are junk 😂 Kawasaki ripped you off 😂
LOL! And the little old lady that lied to me...
@@RobFarrowATV i just put a piston jug and head on one that's the most common problem the front head drops valves
Ya, all new pistons, rings and valves now...
@@RobFarrowATV did that fix it?
@@TheJetskidoctor Changed out the CDI unit and the carbs too, works now.