All-In-One Toilet Installation Kit
HTML-код
- Опубликовано: 14 дек 2021
- The All-In-One Toilet Installation Kit includes the Perfect Seal Wax Ring and Zero Cut Toilet Bolts, taking the guesswork out of toilet installation. The Perfect Seal is a universal toilet wax ring that works with most drain sizes and flange depths. Whether the flange is ½ inch above the floor or 1-1/2 inches below, the Perfect Seal guarantees a perfect seal every time. The patented design combines specially designed rubber gaskets with encapsulated wax that forms a seal three times stronger than a wax ring without the mess and allows the toilet to be repositioned if needed during installation. The Zero Cut Bolts eliminate the hassle of typical toilet bolts that are too long, wobble and are difficult to line up when setting the toilet. The universal bolts work with flanges above or below the floor and can be adjusted in height from one inch to three inches without cutting, removing the threat of chipping or cracking the toilet due to over tightening. The sliding adapters tighten the bolts and attach the low-profile bolt caps. The All-In-One Toilet Installation Kit makes toilet installation easier.
Subscribe to checkout our How Tos & new products » bit.ly/Dancosub
All-In-One Toilet Installation Kit » bit.ly/3gbUhn3
SHOP:
Home Depot » thd.co/2WY7OY1
Lowes » low.es/3bWmkng
Amazon » amzn.to/2LNPlXy
Walmart » bit.ly/3jZDjda
RELATED PRODUCTS:
Zero Cut Bolts » bit.ly/3cW5kPg
Perfect Seal Wax Ring » bit.ly/2zopWkx
SOCIAL MEDIA:
FACEBOOK » bit.ly/DancoFB
TWITTER » bit.ly/DancoTweet
LINKEDIN » bit.ly/DancoLinked
WEBSITE » www.danco.com 
Хобби
This is the best Danco explanation of their product ! If the flange is above or level with the floor, you can remove the blue.
If the toilet rocks, remove the black.
Excellent product. First time pulling a toilet and this made it very easy
excellent video covering everrything to help people like me re-installing ring the first time.
I just bought the Danco Perfect seal at Home Depot. They did not have the All In One kit.
Did work, too bulky. The toilet couldn't set flush to the floor. Removed blue top and black plastic as described, but didn't solve the issue. Have to remove and go back to a traditional wax ring. Perhaps it works well in other situations, but seems incompatible with my new Kohler toilet.
Followed instructions, so far looks good. Thank you.
Does it work with a lead bend flange?
I have copper Drain dose the black plastic ring inside go down to the drain pipe. Seems like it won't go down far enough
Easy to install. Let's just hope this fixes our issues.
Do you have to use the "low profile cap". What if your toilet isn't white?
Does this work with pressure assist toilets?
When my toilet wasn’t flush I then went on to remove the black piece but the wax was messed up.
At this point is the perfect seal still usable?
From the ad and how to from this video it pretty much says you can continue but I’m a little sketched unless I hear from one of y’all I’m good lol
Why did mine not have the alignment bolts...caps ..spacers...just regular toilet bolts?...Just bought at Lowes ...
There are no Lowes, HomeDepot or Ace Hardware within 50 miles from me that stock it. I bought the All in One at Amazon for only $6 more than the basic one.
I have some on hand just incase
uh huh.... and what happens when your toilet is STILL not flush with the floor after removing the black plastic. 🙄
It means your flange is too darn high and you have some work to do
@@RightofCenter No, it means this product is too rigid and is designed for flanges that are too low. That isn't a problem for other toilet seals. I own and manage rental properties. I've dealt with a lot of toilets.
why isn't the plastic lock nut installed over top of the gasket? the hole is too small for it to push through if you install the gasket over top of it
Agreed! That’s what I did bc there was a gap between the danco and the toilet flange and it fit nice and flush! My flange is sitting on top of the finished floor, in my case….
@@charliep5139 So, what's the answer? Do you leave the plastic lock nut with a space or put the danco on top of the flange with no space between and the plastic lock nut on top of the danco? Instructions show it different, but that space doesn't seem right.
The back ground music is annoying...bad advertising strategy.
I like the music so much I bought two