@@Migoladon Because tracers are rounds that are hot as hell. They are usually some sort of magnesium mixture that rapidly burns in the air when shot with a bullet. So it's a bit of added heat in the shooting process and since heat is the primary reason most good guns will wear down and fail this is sort of an added challenge.
It took 40 mags, 1272 rounds at full auto to disable the firearm.however it was still in good repairable condition. Repaired on field in less than 2 minutes.
A friend of mine had a Glock 19, one day we were on the shooting range and the gun blowed up apart, we live in Costa Rica, and the Glock team came all the way from US to investigate the malfunction and gave my friend a brand new Glock, it was pretty amazing
4:40 is a perfect example of why it’s always important to be aware of what’s in front of your gun. That cook off could have been bad had he not been practicing gun safety as well as he always does.
1000 years later some people are going to come to this site and see all the ammo and brass and think some war happened when really it was some guy in a lab coat shooting a full auto glock
Get what your sayin but that's like saying never carry with a round in the chamber even when in a holster. That just wouldn't happen. It only went off because the heat ignited the powder.
@- xD pandemic is the main factor. due to insane demand that occured when the pandemic hit, bullets were flying off the shelves and there weren't enough people to produce them to keep that from happening due to quarantine. bullets have gotten *slightly* less expensive but are still expensive even now.
@@saj4680 Also Biden's Russian gun ammo ban has caused a spike in prices for anything that had at least some imports from Russia. So like 9mm, 556, and of course the Russian calibers, 762, 545, etc.
@@MichaelCanCraft that is.. quite the nightmare. i wasn't even aware of that. thanks for tellin' tho. someday i'm going to learn how to fire a gun simply because i just think it's a skill everyone in general needs, in case there's ever an emergency ever occuring.
The takeaway: "You cannot carry enough ammunition on your person to destroy a Glock with normal shooting conditions." This is a late post, but I bought my first Glock after watching this. Thanks Eric!
Back in the 90's I read an article in Gun Test magazine ( don't know if they're still around) about real life torture test of the Glock. The run over by a car and the frozen puddle got my attention so much I decided on a Glock 21. I still have it and love it. This video really made like Glock even more. 👍
Ironbomb I just got a new Glock 17 and on my first day at the range put 1500 rounds through it. I am in the process of making a Glock 34 for competitions and plinking. One think through the many rounds I have put through glocks is you can’t kill em. They are great!! Except for the 44 that was a bust😑
***** Buddy just take care of yourself and the family. That's all that really matters. We all miss you but you take care of what's important............HMH
You can’t fire any modern machine gun for extended periods. Old shit was water cooled, but that’s no more. Trust me, I was an Army infantry soldier, and carried an m249 for longer than I care to say.
*firing that was wayyyyyy past its design intentions. You cannot hold this test against Glock. 😆 Nobody would ever do this in combat. They had to purposefully try to break the gun here.
Damn...Glock did their thermal engineering quite well...actually, WAY over analyzed. I like it. Glad to see they're not just meeting their 'requirements' but exceeding them by a mile. Excellent.
Why does everyone think that the WASR is American made? It's a Romanian made, mostly mil-spec, AK. All Century Arms does is import it and make it 922r compliant, but that doesn't mean the whole gun is American. It's without a doubt a Romanian made firearm. Is it as high quality as a Russian AK? No. But it's still a good AK, and way better than any truly 100% American made AK (i.e. C39). Sorry to butt in, but I can't understand why everyone calls WASRs American made.
+Lapinmiez I did say mostly mil-spec, but honestly that might be a bit of an exaggeration haha. But that wasn't really the point that I was trying to make anyways. Plus, most AKs on the market today aren't 100% mil-spec either.
***** The WASR is a piece of junk, the test wasn't exactly fair on the AK as a whole. If they had a genuine AKM or AK-74, it'd be fair. A license-built shitty clone isn't exactly up to snuff like the real deal.
Garrett Martin That is the dumbest thing I have ever heard. That is like saying "how about you get shot by a hipoint and tell us that they are great guns" Getting shot is getting shot, how is that relevant to the quality of a gun in any way?
Yespeace 2015 Mercedes is the opposite of Glock. The days of yore are gone for Mercedes. They habe gone down the route of planned obsolescence and overly complicated electronics. Unreliable and expensive shit.
Wet fabric will conduct heat much faster than dry fabric. You should never soak something in water if the goal is for it to insulate you from high temperatures.
March 3, 1911.... check out the torture tests by the Army on the Colt 1911, including mud, water and barrels of acid..... hundreds tested, none failed....... a little bit of history.....
@13R^D Basically, when it comes to hand guns, get a Beretta M9 (92fs & M9A3 as well), good-high quality 1911 (in .45 acp), Glock (pick your poison, they have many flavors), or a revolver (particularly Smith & Wesson or an old Colt). That said, I would also suggest taking a look at the hand guns made by CZ, FN, and EAA Tangfoglio. You can't go wrong with either of those companies.
@13R^D Ay, I getcha. We're all entitled to our own opinion's brother. I was just adding on to what was already stated. The companies/hand gun models I listed, though I was pretty vague, are among the best options (if not the best) when choosing a hand gun. Can I ask why you have such a distaste for 1911's? And I'm not sure why you would label CZ a cliche, as they make some of the most reliable hand guns/rifles out there. Not to mention, their pricing is unbelieveable for the quality you get. I mean, their "Bren" series of assault rifles (805 Bren, Bren 2, and every different size/caliber variant of each) are among the best combat rifles made, period. Even though it looks like an exact copy of the FN SCAR, the build quality of the Bren unquestionably exceeds the FN master piece. Though, the performance of the two rifles are neck and neck. But if we're completely honest, a majority of people would agree that the Bren 2 is overall, a superior rifle to the FN SCAR (L & H). And I LOVE FN! Hence why I mentioned FN in my original post. In terms of hand guns, I prefer FN's variety but, there are a couple CZ's that are just as good. Glocks are reliable as all hell and are a perfect choice for a beginner or pro but, I prefer a Beretta M9, 92 fs, or M9A3 over any Glock. I have bigger hands and have never felt that they were too heavy for any situation in comparison to a Glock. I will say, one specific gun not mentioned enough is the Hudson H9 9mm. Pretty light weight in my opinion and shoots phenomenal.
I was never much of a Glock guy, but theres two things I enjoy about it. It's customizability and durability. Both are absolutley fantastic. For the price of a Glock, it sure is one hell of a qaulity product. It'd be cool to see this video again with an aftermarket metal frame.
Word to the wise, it's generally NOT good practice to wet gloves and pot holders before handling hot objects. If the object is hot enough, it can cause the water in the glove or pot holder to boil and steam directly on your hand, which will burn you more rapidly (and worse) than if the glove were dry.
Never ever get rid of my trusted old Friend of 19 years. G23. Its sits next to my table and bed every day . And watches over me in the Woods. It's my favorite pistol I own. Loved your video.
tymccutchen my first pistol was a glock 23, it's my all time favorite too, I swap barrels from time to time with a KKM .357SIG barrel, owning a .40 is like having two guns in one
Folks. We just witnessed 1.25 million dollars worth of ammo Spent on this science project. I had no idea Eric was worth millions upon millions. Good for him
Titan9mm your probably right. I have one. And I like it but its not a glock. I'm just wondering about the steel chassis if it makes that big of a difference.
Almost 10 years later and this never gets old “She’s runnin like a top fellas” say what you want but JUST BUY A GLOCK! It really is an incredible piece of machinery.
8 лет назад+209
after that test. i don't care what anyone says GLOCK IS GREAT.
a z in America it’s as easy as going to ur gun store ( have to be 21 ) filling out paperwork and running a background check on you to make sure you’re not a felon and after that bam ur good to go , unless ur a felon then he tells u to gtfo , also in Australia ( I’m genuinely curious ) you mentioned it has to be locked up and mags have to be stored separately , do officers come out to where you live and check? Cause if they do that’s a yikes from me
And glock fan boy haters will continue to hate and bash the vid denying whats in plain sight. As if anyone cares what their personal preference is. Not like anyones forcing them to buy a glock
LIKE WHAT YOU SEE? CONSIDER PURCHASING A MAN CAN TO SUPPORT OUR CHANNEL! goo.gl/Vam7yR
Listen man... what license or tax stamp hula hoops do i have to jump through to get one of these awesome full auto Glocks
Buy a tank
Do the exactly same thing but with an ak5 (used is the swedish military)
Iraqveteran8888 haven't seen a full auto polymer 80 that would be a great video.
Human trafficking is illegal
Used glock for sale. Only been used for a day at the range...
lmao
how much
bertito43 what model glock do you have ?is it sold?
Android Tech you guys are idiots...its a joke
Only used once 😂
Birds in the forest: "yo that woodpecker is on some shit"
Whahahaha😂😂😂😂😂😂
IM WHEEZING AHAHAHA
Underrated comment😂
Faxxxx
Underrated comment.
"Every fifth round is a tracer."
*Immediately cuts to a camera angle where it's impossible to see the tracers*
he didn't say the tracers were for you.
every third round is a weak ejection
NotAMethDealer why inform us about it then?
@@Migoladon Because tracers are rounds that are hot as hell. They are usually some sort of magnesium mixture that rapidly burns in the air when shot with a bullet. So it's a bit of added heat in the shooting process and since heat is the primary reason most good guns will wear down and fail this is sort of an added challenge.
Its middle of the day so....
This dude had a switch before they were mainstream 😂
I seen em back in 14
@@wooterrackz2699 dam wtf
@@Bigsativa they used to have a real like lever not that button on the back but it was more like a ar safety switch
@@wooterrackz2699 yeah I’ve seen a few pics of ones like that, no where near as common as the button ones though.
@@Bigsativa Nah then things took over
A tear shed for the thumbs that put all that ammo in those mags.
No sh*t. I can't stand loading even one 30 round mag.
NotDreadYet you gotta get one of those loading assist things, its like a metal piece that helps push them down, makes it 10x easier
thank god for speed loaders
dogfart Tried to load my 15 round Glock 22 mags, said screw it and bought an uplula loader. xD
😂
It took 40 mags, 1272 rounds at full auto to disable the firearm.however it was still in good repairable condition. Repaired on field in less than 2 minutes.
I’m just waiting to see the anti glock people swear up and down that the glock is the most unreliable gun in the world
@@RollingxBigshot well, it's called the block, it's ugly as hell but it works wonders
yes it can be fixed quickly but only if u dont mind a few burns lmao
Josh Bibb I’m sure they got some pliers somewhere. Definitely in one of the trucks.
That's why I like glocks. They work. Period
A friend of mine had a Glock 19, one day we were on the shooting range and the gun blowed up apart, we live in Costa Rica, and the Glock team came all the way from US to investigate the malfunction and gave my friend a brand new Glock, it was pretty amazing
lol wtf
@james bond glock manufacturers are like chick fil a employees
What else did the Americans bring?
@@kylebrogmus8847 science technology engineering medicine.
That is amazing
4:40 is a perfect example of why it’s always important to be aware of what’s in front of your gun. That cook off could have been bad had he not been practicing gun safety as well as he always does.
@@Chopsueypizzareading isn't your strong suite
@@Chopsueypizza people like you is literally why the world is as bad as it is
@@Chopsueypizza No way you were being serious when you typed that lmao
1000 years later some people are going to come to this site and see all the ammo and brass and think some war happened when really it was some guy in a lab coat shooting a full auto glock
Pyro Jake you made my day. lol
Lol a warzone full of 9mm
These guys like to reload. I'm sure they collected all the brass.
don't forget the welding mask.....
Then what will they think at hickocks range lol
4:39 This is why never ever should point the gun towards someone even if you don't have the finger on the trigger.
Exactly what I was thinking.
It cooked a round off.never gonna happen in a everyday situation
Get what your sayin but that's like saying never carry with a round in the chamber even when in a holster. That just wouldn't happen. It only went off because the heat ignited the powder.
Its because the gun was about 1200 degrees at that point but yes always point in the safest direction possible.
@@pittkid32 i really thought this comment was my reply for a second lol
Dat lab coat. such science.
pmm4177 u wot, skrublord?
Food is science
Matt!!!
MattV2099: Guns & Food Such bullets, very operate
22640cal Such funny, very comedy :D
That ammo today is literal gold :(
@- xD pandemic is the main factor. due to insane demand that occured when the pandemic hit, bullets were flying off the shelves and there weren't enough people to produce them to keep that from happening due to quarantine.
bullets have gotten *slightly* less expensive but are still expensive even now.
@@saj4680 Also Biden's Russian gun ammo ban has caused a spike in prices for anything that had at least some imports from Russia. So like 9mm, 556, and of course the Russian calibers, 762, 545, etc.
@@MichaelCanCraft that is.. quite the nightmare. i wasn't even aware of that. thanks for tellin' tho.
someday i'm going to learn how to fire a gun simply because i just think it's a skill everyone in general needs, in case there's ever an emergency ever occuring.
@@saj4680 amen
@@saj4680 hurry before brandon comes to ur door step to take your gun and flirt with your children. Lets Go!!!
Puts tracer rounds in*
Switches to side shot*
Genius editing
literally the biggest blue ball in history.... I wanted to burn their shop down after they pulled that bullshit on us.
Totally. As if the whole point of mentioning the tracer rounds was to piss us off.
I was hoping they responded to this
You expect a redneck hick with an accent like that to have any sort of brain cells driven together
The takeaway: "You cannot carry enough ammunition on your person to destroy a Glock with normal shooting conditions." This is a late post, but I bought my first Glock after watching this. Thanks Eric!
Back in the 90's I read an article in Gun Test magazine ( don't know if they're still around) about real life torture test of the Glock. The run over by a car and the frozen puddle got my attention so much I decided on a Glock 21. I still have it and love it. This video really made like Glock even more. 👍
Ironbomb I just got a new Glock 17 and on my first day at the range put 1500 rounds through it. I am in the process of making a Glock 34 for competitions and plinking. One think through the many rounds I have put through glocks is you can’t kill em. They are great!! Except for the 44 that was a bust😑
not really, it would be maybe 30lbs tops if you're counting the weight of the mags too
Dude sold me on the AK too lol.
I know but I am a Smith & Wesson guy. Love my M&Ps
Can't wait to hear the outcome of your call with Glock's Warranty department! LOL
***** Dude what's up with your channel? I haven't seen much there for a while.
***** Buddy just take care of yourself and the family. That's all that really matters. We all miss you but you take care of what's important............HMH
Glock would probably give them a brand new one seeing as how this video just sold a boat load of glocks!
***** Warranty on what, nothing broke!
Scott Smith Slowing down. I've decided to live my life vicariously through IV8888.
Watching this in 2024
When you're trying to kill a boss in The Division
lol so true
Lmao that's why I didn't play it more than 3 hours, I was tired of emptying hundreds of mags to kill an enemy.
Kevin Mcmillin lmao man good one
Yeah, fuck that game.
Kevin Mcmillin facts...
Gun that eats parts of itself during extended firing: "How badass is that?"
yep.... that's what he said
Well...yes, that's what happens when you dump mag after mag on full auto on a gun that wasn't meant for it
Glock actually makes an auto version. I would like to see how long that one would last.......
You can’t fire any modern machine gun for extended periods. Old shit was water cooled, but that’s no more. Trust me, I was an Army infantry soldier, and carried an m249 for longer than I care to say.
*firing that was wayyyyyy past its design intentions.
You cannot hold this test against Glock. 😆 Nobody would ever do this in combat. They had to purposefully try to break the gun here.
Do a Musket meltdown
Im shure we would all agree that would be really boring
Eric's shoulder would go out before the gun.... Plus the video would be days long
Mhymyk I kinda rape my cat sometimes. I'm normal?
EDC Review what the fuck.
That video would take Years!🍻
This is the most AMERICAN thing ive ever seen.. Hell Yeah Brother
Why would any one give this a 👎🏻 ..?
Like the glock or not ..
that is an outrageous amount of rounds prior to a kinda meltdown
and not to mention a bit of finagling and boom it still fires!!!
Some people get a little upset when items they want get destroyed. Even when done for "science". Like when a rich guy destroys a Lamborghini for fun.
Mainly femanazis.
Literally hundreds of dollars worth, maybe even a solid $1000+.
@@ididthisforthecomments.5893 G3 is about 500 bucks in my town.
Perfection!
If this doesn't demonstrate the reliability of a Glock, nothing will.....
This is why so many people trust their lives with Glock
brendon albrecht try a gen 4 and you will change your mind
Until it kabooms
GLOCK 17 /w shoulder stock stats:
Damage: 22.6
Concealment: -10000
Fire rate: 2 fast 4 u
Noise: earrapist
Recoil: Still
Is this a payday ref?
A wild comment ninja appeared
Slow Delivery yes
Don’t forget Slightly used with steel guild rod upgrade 😂
Michael The Gamer do you know how guns work?
Gun store clerk: so, how much ammo do you want?
Nick: yes
i want all of it now
“How much ammo do you need?”
“One Glock of ammo”
It is good to know that my G17 will last well beyond my lifetime.
I'd be honored to carry the torch afterwards
@@carlosmichel4035 I'd be honored to carry the torch afterwards afterwards
Just replace the guide rod with a metal one.
@@Panzer_Runner I'd be honored to carry the torch afterwards afterwards afterwards
@@4ae109 I'd be honored to carry the torch afterwards afterwards afterwards afterwards
**Moves on to tracers, changes camera angle so we can't see them**
Exactly my thought haha
Really odd
I know right.. that is beyond stupid i can't even wrap my head around it. Cameraman should be fired
Ronsonn Swandom which " fired"?
I know it would be very time consuming but a 357 revolver melt down should be next
Your hands would meltdown before the revolver.
I Did This For The Comments. That’s not necessarily true
Elliot White well mine would.
500 magnum 700 grain meltdown
@@arztbiscuit1433 Jerry Miculek should be the one to do that
See guys the switch WAS okay until a few basketball Americans got their hands on it
How to turn your glock into a hi-point
Hahahahaha!
😂💀💀💀
LOL.... you should consider stand up comedy because you literally had me laughing out loud.
Lmfao 😂
Ummm no. Not even close
Damn...Glock did their thermal engineering quite well...actually, WAY over analyzed. I like it. Glad to see they're not just meeting their 'requirements' but exceeding them by a mile. Excellent.
Doctor Ginger!? Here? :)
I bet the Glock guys had a party with this going in the background!
Perfection. 💯
My gen 3 has been through thousands of rounds in the 3 years I’ve owned it without a single issue. Absolutely love the reliability of a Glock
I’m impressed with the mags
It’s rare to run an entire high capacity magazine without at least one failure, I’ll for sure be getting a few of these
Full auto helps id guess…
They’re oem.. polymer on outside with full metal lining on the inside
Chuck Norris ate a tank and when he took a dump, a Glock came out.
David Parker this isnt 2012 bro
Joel Perez I feel... wiser...
Bruce lee kicked chucks ass
@@joelperez2411 Chuck Norris, just like the Glock lives forever!
@@joelperez2411 meemez are never truly dead my friend.
The Glock 19 for President!
yes sir. screw xd lovers
*18
+armstrong2052 17
17
The 19 promised to secure our borders. :P
It's good to see the Glock last longer than the AK ultimate meltdown.
An american build AK yes. What would you expect...
Why does everyone think that the WASR is American made? It's a Romanian made, mostly mil-spec, AK. All Century Arms does is import it and make it 922r compliant, but that doesn't mean the whole gun is American. It's without a doubt a Romanian made firearm. Is it as high quality as a Russian AK? No. But it's still a good AK, and way better than any truly 100% American made AK (i.e. C39). Sorry to butt in, but I can't understand why everyone calls WASRs American made.
***** WASR is a mil spec AK? :D Maybe in somalia
+Lapinmiez I did say mostly mil-spec, but honestly that might be a bit of an exaggeration haha. But that wasn't really the point that I was trying to make anyways. Plus, most AKs on the market today aren't 100% mil-spec either.
***** The WASR is a piece of junk, the test wasn't exactly fair on the AK as a whole. If they had a genuine AKM or AK-74, it'd be fair. A license-built shitty clone isn't exactly up to snuff like the real deal.
01:50 Female cops when they yell "Taser taser taser!"
Every bald eagle in America shed a tear watching this video
Dont have this right in Canada
Eagles prefer 1911s
Ronald Raygun bald eagles only want American gun designs.
@@stardog62 Eagles prefer outdated undercapacity unreliable overpriced guns? That's odd of them.
Because these aren't readily available to citizens?
Damn, you filmed this 15 years ago?! How could you hold out on us like that?
SBwingman wait wut
lol
Soy Sauce Ichthys the flir cam datestamp
Wait did he really film this 15 years ago
No, like 3 days ago
"Changing to tracer ammo" camera stays to the side for most of the shot D:
1:47 rust people when they get a Glock and a welding mask
the glock out lasted the ak-47
***** The AK is a crap american made one, argument invalid.
It was the wasr 10. Its too poor quality of an ak47 to even count imo
***** milled would last longer
Garrett Martin That is the dumbest thing I have ever heard. That is like saying "how about you get shot by a hipoint and tell us that they are great guns" Getting shot is getting shot, how is that relevant to the quality of a gun in any way?
***** if you learned how to read he was talking about the 9mm round.
In Glock we trust
Dont
@@honeytoastinc.1995 Did
Amen
Glock, The Honda of guns.
oldschool823 vteccccc
oldschool823 well according to this fuck you
oldschool823 it worked
The Mercedes of guns!
Yespeace 2015 Mercedes is the opposite of Glock. The days of yore are gone for Mercedes. They habe gone down the route of planned obsolescence and overly complicated electronics. Unreliable and expensive shit.
Wet fabric will conduct heat much faster than dry fabric. You should never soak something in water if the goal is for it to insulate you from high temperatures.
Glocks. love 'em or hate 'em, they just work.
MrBreeze All love from me. Love my Glocks.
Hi, my name is Eric. I once shot a Glock until the trigger melted.
Nice. :-)
Lol
Dude looks like he's straight outta PUBG
Then you play too much
Consequence No. 62 you’re stupid
Both of you are wrong, there's no welding mask in pubg so if he played too much, he would've known that
I come back to this video from time to time and I’m always impressed. Polymer guns are really amazing
you're amazing
This is why we have an ammo shortage.
+Philip Stringer Lol.
+Philip Stringer I hope you're being facetious
+Philip Stringer We just need Obama declare another ammo ban and there be another supply of ammo coming our way
+Philip Stringer the 1% shoots 98% of the ammo
***** yeah bro
I don’t see any other handgun performing even close to what this Glock did. Hate it or love it reliability is undisputed & second to none.
March 3, 1911.... check out the torture tests by the Army on the Colt 1911, including mud, water and barrels of acid..... hundreds tested, none failed....... a little bit of history.....
@13R^D Basically, when it comes to hand guns, get a Beretta M9 (92fs & M9A3 as well), good-high quality 1911 (in .45 acp), Glock (pick your poison, they have many flavors), or a revolver (particularly Smith & Wesson or an old Colt). That said, I would also suggest taking a look at the hand guns made by CZ, FN, and EAA Tangfoglio. You can't go wrong with either of those companies.
@13R^D Ay, I getcha. We're all entitled to our own opinion's brother. I was just adding on to what was already stated. The companies/hand gun models I listed, though I was pretty vague, are among the best options (if not the best) when choosing a hand gun. Can I ask why you have such a distaste for 1911's? And I'm not sure why you would label CZ a cliche, as they make some of the most reliable hand guns/rifles out there. Not to mention, their pricing is unbelieveable for the quality you get. I mean, their "Bren" series of assault rifles (805 Bren, Bren 2, and every different size/caliber variant of each) are among the best combat rifles made, period. Even though it looks like an exact copy of the FN SCAR, the build quality of the Bren unquestionably exceeds the FN master piece. Though, the performance of the two rifles are neck and neck. But if we're completely honest, a majority of people would agree that the Bren 2 is overall, a superior rifle to the FN SCAR (L & H). And I LOVE FN! Hence why I mentioned FN in my original post. In terms of hand guns, I prefer FN's variety but, there are a couple CZ's that are just as good. Glocks are reliable as all hell and are a perfect choice for a beginner or pro but, I prefer a Beretta M9, 92 fs, or M9A3 over any Glock. I have bigger hands and have never felt that they were too heavy for any situation in comparison to a Glock. I will say, one specific gun not mentioned enough is the Hudson H9 9mm. Pretty light weight in my opinion and shoots phenomenal.
Mark 23
Glocks are hard to beat, keeping it 💯
He has the best job ever
That is for damn sure!! I wouldn't give a shit if I was deaf or not having that much fun!!
His poor shoulder...
Always seems like a waste to me :'(
I was never much of a Glock guy, but theres two things I enjoy about it. It's customizability and durability. Both are absolutley fantastic. For the price of a Glock, it sure is one hell of a qaulity product. It'd be cool to see this video again with an aftermarket metal frame.
This comment is from two years ago but there is a full metal Glock made
very true. could build ur own full build the way u wsnt p80 for like $600
it would never fail with a metal frame. The springs would fail I think after 5000 or so hahaha
Holy (delete expletive)!!! Talk about durable! Yet another reason to carry a Glock.
I wish they fit my hand, feels like a 2x4. But I'm plenty happy with my XD.
Brandon White Have you tried the Gen4?
I doubt it, it's been a few years. Is it less like a 2x4? ... I'll have to check it out.
Brandon White The Gen4 is just slightly thinner.
I got a gen 4 because it felt much better in my hands. (compared to the Gen 3) Granted I don't have large hands
Take it from a cook, keeping your hands and gloves dry blocks heat better since water is a great medium for heat transfer. 👍🏻
Robert Murakami This sous chef agrees. Never grab a hot pan with a wet rag. The same logic applies here.
A fellow cook here. Steam burns are the worst.
I totally agree with you, but I’m no cook, I just put wet stuff on hot stuff for a living.
Coming from a 13 year old cup of soup expert I also agree
Damn conductors..
hell of a woodpecker you there
Lol
i tried shoting a glock i broke my god damn hand
Great video,Nothing runs like a Glock and you just proved that.For sure an iconic pistol to go down in history as the best.
This is why you Glock.
46 & 2 ahead of me.
Vicarious glock
+David Denis do on to others, what has been done to u
Rock out with your Glock out.
Word to the wise, it's generally NOT good practice to wet gloves and pot holders before handling hot objects. If the object is hot enough, it can cause the water in the glove or pot holder to boil and steam directly on your hand, which will burn you more rapidly (and worse) than if the glove were dry.
fuck off - the lower would melt before that happens, he also keeps dipping his hand in water to transfer the heat. Good info anyways.
All I saw was you saying fuck off without realizing it was his name. That would have been quite the escalation. Haha
Your Daddy - fuck off!
Your Daddy jk dude
fuck off nj
No doubt this video has sold a lot of Glocks. Glock should've sent you a new 18 and a big pile of money for doing this.
I always keep coming back to this video.
Damn the glocks are super well built and reliable
Oh yeah yeah
But without any proper safety
@@tullo5564 if you dont pull the trigger, it won't go "bang". It's very simple
@@tullo5564 YOU are the safety. Don’t be an idiot
@@thabrosteph8481 Joke is on all of y’all… Glock handguns have THREE safeties actually…
Well said!! “ you can not carry enough ammo on you to to destroy a glock!!”. That’s very comfort to know!
I am 52 years old and have shot a bunch of pistols in my lifetime. Trust me, Glock rules :)
Can u 3d print the polymer parts
Elias Blakely If you have the schematics, but it would be shit compared to the original.
Elias Blakely
You gonna need a good printer and plastic you print these part reliably.
Elias Blakely I wish I could but with my cheap printer I cannot :)
2010ngojo Yes, you would need one of those $100k laser printers. Even then the plastics aren't as good.
I absolutely love these ‘meltdown’ videos.
Showed this to my dad just now. And I can tell you he's impressed with both the video and Glock.
I’m sure someone’s probably said it.
That Glock sound like a woodpecker on steroids lol 15:51
Can you do a polymer lowered AR 15 meltdown??
I think he already did an AR 15
+Emerald Joker yeah i know but i want to how a polymer lower would hold up.
+QpOfDaNorthLV oh ok haha yeah same here.
They make plastic lowers?
+Spaghettios yessir
They probably sold the gun as new the next day!! Lol
that's chad gun and u cant up and sell a full auto glock
no shit
it was a joke you stupid fuck!!!
GREG GREER Nigga is dumb as hell.
lol it's possible lol
rip gaston
when you get into a firefight with a glock in battlefield 4 from more than 20 meters away
I call modded controller
Never ever get rid of my trusted old Friend of 19 years. G23. Its sits next to my table and bed every day . And watches over me in the Woods. It's my favorite pistol I own. Loved your video.
tymccutchen my first pistol was a glock 23, it's my all time favorite too, I swap barrels from time to time with a KKM .357SIG barrel, owning a .40 is like having two guns in one
Folks. We just witnessed 1.25 million dollars worth of ammo Spent on this science project. I had no idea Eric was worth millions upon millions. Good for him
Thinking the same thing. But ammo back then was .15 not .45-.90 in todays new normal 😑
when the glock is so savage it eats itself
Willie mac only a Glock can beat a Glock
*Thank you for reminding me why I bought a Glock.*
I wanna buy one
I hope you do an m&p pistol like that next.
Loser
John Wayne your the loser..
Miguel I know him he's family
Titan9mm your probably right. I have one. And I like it but its not a glock. I'm just wondering about the steel chassis if it makes that big of a difference.
Your a commi Clint
I got a 17 Gen 5. I already knew Glock was top of the line. This video is just icing on top.
When is Glock going to make a rifle? I would love to see their version of an MSR-type rifle.
Anything would have been better than the .22 they just released
Put a long-ass barrel with the stock on it and you got a good Submachine Gun
Like the market isnt already saturated with ars right now
iDeagle - it shouldn’t be an AR. MSRs aren’t necessarily ARs. I’d like to see their take on a versatile semi auto utility/defensive/fighting rifle
@@dsbiddle Oh im sorry. Let me rephrase: "like the market isnt already saturated with msrs right now"
This is a hell of a way to break in a new gun.
Why dont you just use huge drum mags?
Shadowwalker0408 cus then you're running the higher risk of malfunctions coming from the mag and not the gun, I figure.
I think that he got those from a sponsor.
Too heavy I guess
Eric did get the mags from a sponsor, hence no drum mags probably
Good reload practice
im re-watching again years later. i miss these.
Glocks are #1 period, damn they are tougher than I ever thought. This makes my brand new G20 that much more sweet!!
Glock 20, or my preference the 20c......are simply the BEST of the BEST.
Glock 20 club haha
Glock 17 4th gen for life.
Glock 22 gang !!!💯
How is the recoil on the 20? I have the G31 that mf is sum
playing his meltdown videos at 2x speed is very entertaining
Your Friendly Neighborhood Soviet been doing that all night
Dumping rounds like a madman
Your Friendly Neighborhood Soviet m134 in pistol form
MG-42
Kkkkkkkkkk true
The only logical step now is to test a......1911
goodinsrt8 Don't think they make full auto 1911s. The Glock 18 is a real thing. To get a full auto 1911 you would have to design it.
drtrolish with some of the match triggers out there, you could rip off a magazine pretty quick.
Tell that to John Dillinger
drtrolish Like they said, there are full auto 1911's, but they are rare. Let them trigger a semi auto one and see if it goes.
goodinsrt8 Chambered in 10mm, why would anyone bother with a 45acp?
Almost 10 years later and this never gets old “She’s runnin like a top fellas” say what you want but JUST BUY A GLOCK! It really is an incredible piece of machinery.
after that test. i don't care what anyone says GLOCK IS GREAT.
Agreed, there will always be naysayers though. Let them bask in their ignorance
GODHEAD1 except the one he just ruined
Sircheesepuff 21 the glock still fired after that punishment. i feel like it passed the test
GODHEAD1 I completely agree
GODHEAD1 great guns I just don't like how it looks it's too blocky to me
I don’t know why people think it ugly af. Honestly I think it’s the best looking pistol
Ez me too... its unique
Ez nah man... That's the 1911
I agree with you
I wouldnt say best looking, but I think it is a good looking gun.
peoples say it a ugly gun. but jerks cannot make a damn gun.
The spirit of Barry lives within you. They need to make an after market aluminum glock frame and it will be indestructible.
Or a titanium frame
+jeremy beverly Ya but imagine trying to hold it
Nothin the right kind of grips can't fix. 3MinGun Vids i bet that plastic was pretty hot too.
Robar makes an alloy frame
+jeremy beverly but then it wouldn't be a Glock anymore.
the ungodly reliability of a glock is unmatched even after well over 1000 rounds through it
The more rounds that thing eats, the more it glows with the power of Mordor!
"Chupacagra" and "pliers" got me good. Keep making these, meltdowns are so much fun to watch.
"*clears trought*" ladys and gentalmen,
america
***** close enough
Snowy 101 yep im autistic
***** I don't know, Jack. Where on the spectrum are YOU?
***** All good. We shall resume when you get on a computer with a cup of coffee :)
domo is back idgaf
I can’t believe it’s been 9 years! This is the 5th time I’ve watched this. Loved the meltdown series
Every gun company and gun fears him
a z true true
a z it’s the Toyota Corolla of the gun world , cheap , easy to fix and very reliable
a z in America it’s as easy as going to ur gun store ( have to be 21 ) filling out paperwork and running a background check on you to make sure you’re not a felon and after that bam ur good to go , unless ur a felon then he tells u to gtfo , also in Australia ( I’m genuinely curious ) you mentioned it has to be locked up and mags have to be stored separately , do officers come out to where you live and check? Cause if they do that’s a yikes from me
a z got ya my man , sorry about that and no worries ur English is just fine and thank you for educating me
Excellent video
Well you've done it!! This one will be remembered and used to brag for an eternity. Great work!!
I love my GLOCKS AND MY M&PS. Thanks for the work,
And glock fan boy haters will continue to hate and bash the vid denying whats in plain sight. As if anyone cares what their personal preference is. Not like anyones forcing them to buy a glock
This is the only video that exist, with the best torture test. For glock
you should do a full auto 10/22 meltdown.
Yes
definetly
Jams galore
*cries in .22 shortage*
Drew Zaio Maybe we will see someday
You should put a round counter in a corner
Jeez, that was impressive!