Schumacher Cougar LD2 Build Review
HTML-код
- Опубликовано: 8 сен 2024
- Schumacher Cougar LD2: www.discountrc...
Schumacher Cougar LD2 SS: www.discountrc...
Parts used:
20% off Whitz Racing ceramic bearings: www.whitzracin...
Gens Ace Redline 2S shorty Lipos: bit.ly/3c4z3qV
Hobbywing XR10 Pro Stock Spec ESC: bit.ly/2UWBwhd
Team Powers Actinium V4 17.5t motor: bit.ly/3wie8HZ
Savox 1267SG servo: bit.ly/3jVTJ9p
Sanwa RX-481 receiver: bit.ly/3ynpLip
Brass pivot block: www.discountrc...
Brass ESC tray: www.discountrc...
Brass front chassis weight: www.discountrc...
Black Response Long springs: www.discountrc...
Rear swaybar conversion: www.discountrc...
I build the Schumacher Cougar LD2 race buggy, let's see how it went!
#Schumacher #CougarLD2
Great to see reviews on different brands. Thanks for posting.
Beautiful buggy. And great thorough review Razor. Cant wait to see how they perform. Those actinium motors are awesome.
Love the clean look with no front wing.
Agree that clearance below servo horn is tight. I do not love the kit servo horn but i will try it, was very tight going on the servo. Car needs more brass up front, can add weight below bulkhead, tray as you have , plate below battery then a normal weight body. That light body is paper thin may not last long.
From what I understand and I have heard there’s a reason they use the ball studs on the shocks so that if you crash there more prone to pop off then break
good info, thanks!
Is that a regular size servo ? Do u need a low profile servo?
Razor rc have you noticed the slop in the front hubs
Im a newbie and have never ever built a kit before is a kit like this doable for a first time builder? or would i need help from sb that has a clue? 😂
Hey razor. I have a ? I’m new to this part of the hobby. I own A lot of bashers , street/drifters , a crawler and working on a drag build. I picked up 2 of this style RC on a trade. There in mint condition. I know one is a TA b6.2 d and the other is the same exact RC but it’s 4wd. The 4wd was complete. I built the 2wd. Sorry. Let me get to to the point lol. I just insalled my Esc (xr10 g2 pro elite ). And I need to solder on some 5mm billet connectors to the Esc for the batteries. I was wondering which connectors do you recommend. Thanks
Building this kit for a friend of mine, I have build plenty of kits,installed the savox 1258 and the ball stud on bellcrank rubs, is there a solution for this?
No motor sensor wire??
Had a couple little things still to do -- sensor wire, rear sway bars, set end points.