Hey buckin. I just got my teeth kicked out by a maple spring pole. I was in the dentist from 5 till 930 last night. But guess what I'm saying thanks to you.... I'm just thankful to be alive. And I'm in a good damn mood. Love you all.
G'day Buckin, I had to smile seeing Bear claw bent over as a seventy year old debarking that log with the Spanish Basque axe whilst you were busy filming and talking, that's a man used to hard work 👍.
Since you and BearClaw are spending more time together, it would just amazing to see you video BearClaw porting. He is an amazing technical craftsman and his soft spoken words are pure gold to everyone porting. He is an part of logging/falling history and should be captured and shared for this generation and future generations to come. I would love to hear what he thinks!!!
I am old enough for Brian to be my younger brother. I enjoy his measured approach to expressing himself. Still I enjoy listening to you rattle on about many things until they are balled up like a pile of twine. Good guys, good video. Keep at it.
Sharp boxing drill you did there Bucken Billy, I used to be a boxer and kick boxer back in the day , I seen the little movement with the shoeshine flurry was cool . You put out great content I learn so much from your videos, Thank you God bless you and your family.
I learn so much from watching Brian! His movements are smooth, just what is required, and nothing more. No wasted effort or energy. I am sure that is what decades of experience teaches you. Even though I've got five plus decades behind me, I am still learning by watching others who have mastered it! Thank you for sharing this wonderful gentleman with all of us! Love and blessings to all... Lieutenant Bradley ❤️💪
My my my Buckin I wish I could explain how warm and full my heart is for you when I see you and Bearclaw hangin out and talkin saws. Love it brother and I love ya man. Thank you very much. 🌲❤🌲✊🪓
ITS NICE SEEING 2 LOGGERS REMINICING ABOUT OLD TIMES ,YOU CAN TELL BEARCLAW LOOKS AT BUCKIN LIKE HIS OWN SON IM GLAD THEYVE STUCK TOGETHER FOR ALL THESE YEARS ITS AWESOME LOTS OF KNOWLEDGE AND EXPERIENCE BETWEEN THE 2 OF THEM
I've run a Stihl 461, 462, and 660 (among other saws...a 572XP). The 462 is absolutely my favorite, that power to weight ratio is amazing, and not too cumbersome even when climbing with it; however, I completely agree with it loving "smaller" wood. The perfect Stihl 462 setup is a muffler mod, with 8 tooth sprocket, spinning an 84DL chain (25" bar). Here in the southeastern US, I don't need much more than that very often, however when needing a 36" bar my old 660 is definitely the better saw for that length.
Nothing better then a Buckn video before a days tree work 🌲. I picked up my 500i yesterday. And well what a saw like it cuts really good as a stock saw out the box I'm very pleased with it . It's feels like my 660 for power but just super light . Great to see Brian on the channel I enjoy hearing his opinion on things such a wealth of knowledge! Reminds me of the fella who taught me how to fall timber and work on saws. Great video mate keep it up!
I'm not a tree guy I just grew up on a farm cutting firewood and still do like watching your stuff and getting ideas to use my equipment better I've always liked hanging my own ax heads so I enjoyed learning new ways to do things thank you for what you do and keep on doing it
Love what you do Bubba buckin I'm new to channel and new at cutting with chain saw do I'm a rookie you have reached me alot on all especially sharping a chain now I'm getting it thanks so much Bubba buckin love you brother...
I love watching you bang wedges buckin, keep spilling the knowledge I have learned alot on how to take care of trees on our 33acre heavily wooded property.
fought through these nasty conditions here in Wisconsin 2day and got our big oak tree job wrapped up, was hoping for a video to perk me back up after getting home from the shop and ofcourse wasn't let down . now i can watch yall work while i get some food grilling haha. thanks for everythang buck!!
Yo. What I noticed. FYI. You don’t want a 462 on a fire crew. If the saw shuts down it’s a hundred dollar diagnostic at the stihl shop. No time for that. 461R is the champ.
Like seeing the breath in the cold air, big clouds of steam when your huffin and puffin in the chill of west coast Canada. Happy winter weather to all, enjoy it while it's here.
I’ve already given this video a 👍up & I haven’t even watched it yet, haha. Just sitting down now to enjoy the video. Thanks Buckin & friends. Hope your all having a good day. Love always wins. Be kind. Respect ✊🏼
Buckin and Bearclaw! I'm so blessed to be able to watch to humble legends. Buckin you are an incredible man. Love from Ohio. Huskies are tried and trued. Nothing wrong with stihl I'm just a husqvarna man. Love the big saw blade the ol burner is sitting on. Fun shop buckin
Hey Buck in. You keep these videos coming brother I’m learning stuff from you every day and I will continue to. I was bucking a huge tulip poplar yesterday and I use the knowledge that you give me and I’ve been cutting trees for 15 years and I learned from you every day. You’re awesome God bless you and you keep this coming and I could do this all the time man we love you.Hogan we’re so proud of you keep it up brother
The 461 is just a beast for its class. 462 in my opinion is a 24-28" bar killing machine. It's lite and it's fast in the smaller wood. Big wood and longer bars the extra stroke +2mm in the 461 takes it. No replacement for displacement. 462 bore x stroke 34x52 461, 36x52 Makes all the difference.
I’m mostly depressed now honestly, in 2019 my family and I lost literally everything in a inferno of a wildfire and trying to recover from it and than my favorite neighbor moved who was my best friend and I bought her truck from her before she left so it meant a lot to me than 2 weeks ago I rolled it and I don’t know if it’s fixable it’s not looking good and so many more problems every day, so I don’t really remember what it’s like to have a really good day and to be so happy, but it’s really nice to see you so happy and your cheerfulness it helps me plus I love to cut firewood and mill boards. I hope you and your family are doing well!
Incredulously humble human...bestowing the most love and motivation to the world. I miss working that fur, I'm from Idaho living in florida. But watching you makes me wanna get back up there. Thanks for being you!
Been running a 462 for years....down here in illinois she screams through our hard woods...got to adjust those rakers...I stagger them...that cold frozen wood like our nasty oaks....love seeing you put them through what those saws love...WOOD...Do have to say thanks Buckin'....always get excited for the next video....
Hi Buckin. Another great video. Wife's doing yoga in the lounge so was a great time to watch it. You just chill me out after a busy day. Big love to you and the Buckin army. ✊❤
Thanks Auction Indiana! And thanks to all the others that make the channel grow, sincerely.❤️ Loving all the power saw comparisons and discussions. Good stuff! Take care everyone, hope everyone's doing great.
great video buckin hope the army is well this is the best channel going buckin thankyu for your wisdom love an time for all of us to enjoy your videos keep them coming buckin I'll keep watching them
hey buckin,i am also a man of my word, so i play some harp for you in my last video, enjoy it! greeting to the buckin army and all messengers of kindness! love you all! stay kind and helpful, open a door for someone and do good things, it will pay back this way or another! have a great day everyone! big hug to the comunity!
Thanks for what you do do. While some people may not be fellers, I'm a tree guy and after so much of the back cut I'm looking up. It has been neat to watch your son grow with experience. Keep up the good work you nut. Lol
Thanks Auction! And thanks to all moderators and super chatters and messangers of kindness. Especially Christine thank you, im sure its a full time job keeping up with Buckin!
still rocking a ms460 that has a big bore kit that was a hand me down saw from my dad i used to cut wood with all of my childhood. Those newer saws looks incredible
I’m new but I’ve basically watched all of your videos mr buckin. I’m 26 and just bought a house in the mountains where I’m buckin, fallin and splitting white oak!! The most valuable part of your story so far is your sobriety, I haven’t gotten to that point yet where I believe in a higher power. You doing it at 27 gives me hope that it’s not too late. I’m taking your kindness message to heart, trying in everything I do to make people feel loved. Anyways I got a GBA boys axe, immediately starting splitting because why not. Traded it in for the big boy GBA and can’t wait to get back on the rounds. Why don’t you talk about or use GBA axes more often? Just curious. ALL LOVE ALL PEACE ✌🏽
"We're at Peace, not in a hurry" says Buckin. You're exactly where u are supposed to be right now. Trust that.....and of course keep being Kind! To urself too friend! Go Army Go💪❤👍✌
Hi Billy great movies with your friend is a Great person wow I like you take the time explain so so well to the people’s on RUclips. Everything help. all does little details they are so important you are amazing Men 👍 I like following your movies Buddy Bert
I LOVE my 461 that is all stock except for a WCS muffler. I actually think it cuts better then my 661 in most wood. Trying to find another one as a spare.
Hi Buckin ! The new saws (462, 572) have the same style carburetor as the old school adj versions. Basically you have “a little man with an orange screwdriver” constantly adj the h screw for best performance.... that’s it ! Now the internal porting is different on these new strato charged “air leak saws”. They actually inject raw air into the cylinder via another set of ports that “hold” the fresh charge from entering the cylinder for a .001 of a second (or so) such that the exhaust is cleaner (epa pollution crats!)... Both Husqvarna and STIHL are giving the customer a more powerful stock saw cc for cc than the predecessors ... If you look at a 372xp or a 440 you are getting about 5.3hp outta the box whereas the 572xp and 462c give ya about .5hp more . As far as torque you can make these new models stronger than the old-school by a fuzz simply because the carburation is superior. I can tune a carb with a screwdriver so they rip but I simply cannot beat software and a servo doing it ... be nice 👍 .... ruclips.net/video/Yy5yy0re4Gk/видео.html ... straight goods thru wny hard maple - feel/hear the powa ... she’d go thru BC balsa fir about 1.5-2.0x quicker .... outskis 😃
I had an 041 super. Then traded in for a 310. Shouldn't have traded and just kept the old one just to have it. I wasn't disappointed with the 310 at all though. I've been running it for years, at least a dozen. Farm, firewood, clearing pastures. Rebuilt the carb once from the ethanol crap. Hand file every time. Edit- that's exactly why I should have kept my 041 super. I just had the torque on the bottom end when needed. We get locust that's been down for 20yrs or so and hard enough to throw sparks when cutting. The 310 does good, but you can dull a chain fast in that stuff. Don't think I'd be much into the electronic saws.
Old saws are like old Harleys. Run and sound awesome. But new electronics one run smother with less issues with different fuels. Myself give me the old ones. Maybe someday I'll go to the dark side I mean new side. Lol
Hey Billy great video Guess your right on the 462 I run mine with 24inche cannon steel bar full house grind and it cuts like crazy and that's probably what it likes best for bigger wood it the 661 Going to try a roll of the 3/8 skip hard to get over here Keep up the wedge work I love it I think the 500i is in for a battle with that husky from iron horse that thing is awesome Tell the CLAW I love him 👍 Love from Eire Gerry the Miller man
Развлечения
Hey buckin. I just got my teeth kicked out by a maple spring pole. I was in the dentist from 5 till 930 last night. But guess what I'm saying thanks to you.... I'm just thankful to be alive. And I'm in a good damn mood. Love you all.
that sucks. glad you are in a good mood through all of that. Are you getting those permanent dentures or the old school kind? I hope you heal up
that sucks. glad you are in a good mood through all of that. Are you getting those permanent dentures or the old school kind? I hope you heal up
hope you heal up fast Joe
Prayers from Charlotte, NC. My "bad" day at work is now regrettable. You thankfulness is contagious.
G'day Buckin, I had to smile seeing Bear claw bent over as a seventy year old debarking that log with the Spanish Basque axe whilst you were busy filming and talking, that's a man used to hard work 👍.
all he knows
Since you and BearClaw are spending more time together, it would just amazing to see you video BearClaw porting.
He is an amazing technical craftsman and his soft spoken words are pure gold to everyone porting.
He is an part of logging/falling history and should be captured and shared for this generation and future generations to come.
I would love to hear what he thinks!!!
I am old enough for Brian to be my younger brother. I enjoy his measured approach to expressing himself. Still I enjoy listening to you rattle on about many things until they are balled up like a pile of twine. Good guys, good video. Keep at it.
Sharp boxing drill you did there Bucken Billy, I used to be a boxer and kick boxer back in the day , I seen the little movement with the shoeshine flurry was cool . You put out great content I learn so much from your videos, Thank you God bless you and your family.
I learn so much from watching Brian! His movements are smooth, just what is required, and nothing more. No wasted effort or energy. I am sure that is what decades of experience teaches you. Even though I've got five plus decades behind me, I am still learning by watching others who have mastered it! Thank you for sharing this wonderful gentleman with all of us! Love and blessings to all...
Lieutenant Bradley ❤️💪
My my my Buckin I wish I could explain how warm and full my heart is for you when I see you and Bearclaw hangin out and talkin saws. Love it brother and I love ya man. Thank you very much. 🌲❤🌲✊🪓
Amen, Amen, Amen!!!
loved your 3 generation video
ITS NICE SEEING 2 LOGGERS REMINICING ABOUT OLD TIMES ,YOU CAN TELL BEARCLAW LOOKS AT BUCKIN LIKE HIS OWN SON IM GLAD THEYVE STUCK TOGETHER FOR ALL THESE YEARS ITS AWESOME LOTS OF KNOWLEDGE AND EXPERIENCE BETWEEN THE 2 OF THEM
I've run a Stihl 461, 462, and 660 (among other saws...a 572XP). The 462 is absolutely my favorite, that power to weight ratio is amazing, and not too cumbersome even when climbing with it; however, I completely agree with it loving "smaller" wood. The perfect Stihl 462 setup is a muffler mod, with 8 tooth sprocket, spinning an 84DL chain (25" bar). Here in the southeastern US, I don't need much more than that very often, however when needing a 36" bar my old 660 is definitely the better saw for that length.
Thanks to all the moderators and people keeping this channel going. Much appreciated...
Nothing better then a Buckn video before a days tree work 🌲. I picked up my 500i yesterday. And well what a saw like it cuts really good as a stock saw out the box I'm very pleased with it . It's feels like my 660 for power but just super light . Great to see Brian on the channel I enjoy hearing his opinion on things such a wealth of knowledge! Reminds me of the fella who taught me how to fall timber and work on saws. Great video mate keep it up!
When you use it a few hours it's gonna be even better
I'm not a tree guy I just grew up on a farm cutting firewood and still do like watching your stuff and getting ideas to use my equipment better I've always liked hanging my own ax heads so I enjoyed learning new ways to do things thank you for what you do and keep on doing it
Listening to Buckin and Brian I feel as if my T-levels are off the charts.
You guys had a great conversation more men should have.
Stay warm!!
I trust ya buckin, but man I love my 461. I had them dished, bored, ported, and straight piped.
461 is one of the best out there
Thanks for asking the guys in the bush. I like those little bits info you can’t get anywhere else. Thank you friend
Kindness and love.
hello Billy
@@michaelwhiteoldtimer7648 hello Michael white how are you this fine evening.
Brian's Cutting Technique Is SOLID Brother SOLID..
How can you not love Brian? Few words and a world of knowledge. My great friend is a old logger when he speaks I listen.
Nice to see you and Bearclaw working side by side again. Thank you Brent for all you do.
One of my favorite videos Billy. Two men at their trade talking tools of the trade and getting it done. Nothin but love.
buckin, you cheered this young gal up today! Thank you !
good news
Love what you do Bubba buckin I'm new to channel and new at cutting with chain saw do I'm a rookie you have reached me alot on all especially sharping a chain now I'm getting it thanks so much Bubba buckin love you brother...
Sorry auto correct is mis spelling lol
Welcome to channel friend! So much I have learned from Buckin too. This is an amazing community! Stay Kind, stay Strong✌❤👍
I love watching you bang wedges buckin, keep spilling the knowledge I have learned alot on how to take care of trees on our 33acre heavily wooded property.
Same. I’m in the same boat. And I wonder how I’m still alive after seeing how t needs to be done properly. Lol
I've got a 97 371 and it rips, runs out better than my new 372, my favorite saw!
I have the exact saw a 97 !
fought through these nasty conditions here in Wisconsin 2day and got our big oak tree job wrapped up, was hoping for a video to perk me back up after getting home from the shop and ofcourse wasn't let down . now i can watch yall work while i get some food grilling haha. thanks for everythang buck!!
Nothin like a hand filed saw. Love seeing big chunks fly.
Yo. What I noticed. FYI. You don’t want a 462 on a fire crew. If the saw shuts down it’s a hundred dollar diagnostic at the stihl shop. No time for that. 461R is the champ.
Hi my name is Dean and I learned so much from your channel I’m new to your channel but I keep up the nice videos I enjoy watching them
Like seeing the breath in the cold air, big clouds of steam when your huffin and puffin in the chill of west coast Canada.
Happy winter weather to all, enjoy it while it's here.
het jirus
Hi buckin!!!!! 🪓🪓🪓🪓 and all the soldiers of kindness
Hi Walter👋❤👍❣
No bs but I learnt so much in the last month since I started watching your channel you have a wealth of knowledge 👍👍
I used to hate doing tree work but now I look forward to it
i am gla it has helped you
I’ve already given this video a 👍up & I haven’t even watched it yet, haha. Just sitting down now to enjoy the video. Thanks Buckin & friends. Hope your all having a good day. Love always wins. Be kind. Respect ✊🏼
Buckin and Bearclaw! I'm so blessed to be able to watch to humble legends. Buckin you are an incredible man. Love from Ohio. Huskies are tried and trued. Nothing wrong with stihl I'm just a husqvarna man. Love the big saw blade the ol burner is sitting on. Fun shop buckin
thx Eric
Great to watch two legends sawing together again
Hey Buck in. You keep these videos coming brother I’m learning stuff from you every day and I will continue to. I was bucking a huge tulip poplar yesterday and I use the knowledge that you give me and I’ve been cutting trees for 15 years and I learned from you every day. You’re awesome God bless you and you keep this coming and I could do this all the time man we love you.Hogan we’re so proud of you keep it up brother
The 461 is just a beast for its class. 462 in my opinion is a 24-28" bar killing machine. It's lite and it's fast in the smaller wood.
Big wood and longer bars the extra stroke +2mm in the 461 takes it.
No replacement for displacement.
462 bore x stroke 34x52
461, 36x52
Makes all the difference.
Keep showing it buckin. Most people dont have others around to gain your level of expertise from.. Your knowledge it priceless Freaking PRICELESS!.
I’m mostly depressed now honestly, in 2019 my family and I lost literally everything in a inferno of a wildfire and trying to recover from it and than my favorite neighbor moved who was my best friend and I bought her truck from her before she left so it meant a lot to me than 2 weeks ago I rolled it and I don’t know if it’s fixable it’s not looking good and so many more problems every day, so I don’t really remember what it’s like to have a really good day and to be so happy, but it’s really nice to see you so happy and your cheerfulness it helps me plus I love to cut firewood and mill boards. I hope you and your family are doing well!
Good afternoon uncle bucken love ur video's please stay safe
Incredulously humble human...bestowing the most love and motivation to the world. I miss working that fur, I'm from Idaho living in florida. But watching you makes me wanna get back up there. Thanks for being you!
Been running a 462 for years....down here in illinois she screams through our hard woods...got to adjust those rakers...I stagger them...that cold frozen wood like our nasty oaks....love seeing you put them through what those saws love...WOOD...Do have to say thanks Buckin'....always get excited for the next video....
those size huskies are probably the most rounded saws out there
A great big Heck Yeah thanks to all of ya that work behind the scenes to help Buckin make this channel what it is.
Keep it up, Buckin! I’m getting ready to be the owner of a brand new 395XP and it’ll be put to very good use. Learn so much watching your stuff.
Thank you for your videos they are just full of positivity and you can't help but feel positive after watching them
I love to learn it all. Never gets old. Keep on buckin and banging wedges
I for one have taken a lot of good information and tips from your channel Buckin. Thanks from the NE
Hi Buckin. Another great video. Wife's doing yoga in the lounge so was a great time to watch it. You just chill me out after a busy day. Big love to you and the Buckin army. ✊❤
Thank u friend! Big Love back to u two's! ✌❤👍
Thanks Auction Indiana! And thanks to all the others that make the channel grow, sincerely.❤️ Loving all the power saw comparisons and discussions. Good stuff! Take care everyone, hope everyone's doing great.
💚👍
Sounds awesome Buckin. Like a hot knife through butter. Ive been husky mad the last 30 year's too. Peace to you and the family.
I appreciate the vids. I can never stop learning
Really good content you're pumping out! Thank you!
Great video brother and I LOVE that Ford sign you have hanging in the bunker!!
Great video!! I love my 461R, 500i,661cm. Stihl loving it!! Your tests are highly respected!! Thanks!!
THANKS AUCTION INDIANA ,TO ALL MODERATORS ,SUPER CHATTERS AND SOLDIERS OF KINDNESS GODBLESS YOU ALL BE SAFE AND HAVE A GREAT DAY EVERYONE
Very welcome!💚
thanks steve :) you too brother
@@AuctionIndiana what part you in?
@@joshuap7501 Fort Wayne Area, Yourself?
@@AuctionIndiana about an hour south of you grant co
Felt like loosing the plot all day ... anyway buckins mellowed me out in 5 minutes flat . Cheers brother 👍 keep cheering us all up
Stay strong and mellow friend! Keep the kindness roll'n! Remember be kind to urself too!! ✌❤
Great video! Love all the saws!
Hey bucking. Love your vids brother. Keep doin what your doin. Be kind y’all. Also I love my 461
Hey buckin great job... left the tree world 10 years ago in Okanogan you make me wish I could go back
You do inspire and teach! Please keep on teaching
great video buckin hope the army is well this is the best channel going buckin thankyu for your wisdom love an time for all of us to enjoy your videos keep them coming buckin I'll keep watching them
Great video. I’m liking this soft spoken bear claw guy! Cool saws. That 461 needs a Donnie walker fluff and buff.
I thought about getting a 461 glad you made a video about it thanks
Hey buckin army!! Love the sound of the old iron! There's just something about the 70's saws...
👋❤👍
I’m happy when I’ve my Stihl work jacket on with my MS 360 in my Hands , our snow is on the move now here in Scotland !
Glad you are feeling sooooo good!
hows the island
I love the wedgemenship discussions and lessons.
good
hey buckin,i am also a man of my word, so i play some harp for you in my last video, enjoy it!
greeting to the buckin army and all messengers of kindness! love you all!
stay kind and helpful, open a door for someone and do good things, it will pay back this way or another!
have a great day everyone! big hug to the comunity!
Best to you as well!
@@jeffreyrubish347 THX!
I’ve ran a 462 I really liked it planning on buying one before long great video as usual
Awsome!! Love your videos sooo much
The nutty wood cutter!!
What a joy!!
Thanks for what you do do. While some people may not be fellers, I'm a tree guy and after so much of the back cut I'm looking up. It has been neat to watch your son grow with experience. Keep up the good work you nut. Lol
Thanks Auction! And thanks to all moderators and super chatters and messangers of kindness. Especially Christine thank you, im sure its a full time job keeping up with Buckin!
💚
Great video I like to see how open you are to what works. Christine love getting the gullet sweatshirt from you.
Bro your vids have made my sharpinin better. Thanx for sharin what ya know works
welcome
So cool to continue to see Bear Claw in the videos. That 371... she cuts. 💪
Lovely",your in a cleaning mood nakes the shop look great
still rocking a ms460 that has a big bore kit that was a hand me down saw from my dad i used to cut wood with all of my childhood. Those newer saws looks incredible
I love ya uncle buckin so motivational have always loved ur videos thank you so much
Buckin you are our commander in chief!!!
Damn that's nice axe BUCKIN great video as always keep em coming
Great vid. Like the saws and the "Bear". Take Care, Stay Safe and Be Kind...
Hello Brother full of love and Kindness Love the Buckin Army Family.
I have the 462, I reaaalllyy love that saw, I even like it more than the 500i. But when I'm in the woods, the 462 rips reaallyy good on big wood.
I’m new but I’ve basically watched all of your videos mr buckin. I’m 26 and just bought a house in the mountains where I’m buckin, fallin and splitting white oak!! The most valuable part of your story so far is your sobriety, I haven’t gotten to that point yet where I believe in a higher power. You doing it at 27 gives me hope that it’s not too late. I’m taking your kindness message to heart, trying in everything I do to make people feel loved. Anyways I got a GBA boys axe, immediately starting splitting because why not. Traded it in for the big boy GBA and can’t wait to get back on the rounds. Why don’t you talk about or use GBA axes more often? Just curious. ALL LOVE ALL PEACE ✌🏽
Good going, Daydreamers.
"We're at Peace, not in a hurry" says Buckin. You're exactly where u are supposed to be right now. Trust that.....and of course keep being Kind! To urself too friend! Go Army Go💪❤👍✌
I'm a new Buck'r! If a man can hold my attention for 30 min. while he tries on boots... he's got a new fan.
His got a heart of gold🪓🪓
Welcome!
Glad you are enjoying the Buckin Billy Ray experience!
Be Kind Friend!!!
💚🌲💚🌲💚🌲
It's a great place to spend time!
Ha ha. Welcome
Hi Billy great movies with your friend is a Great person wow
I like you take the time explain so so well to the people’s on RUclips. Everything help. all does little details they are so important you are amazing
Men 👍
I like following your movies
Buddy
Bert
I LOVE my 461 that is all stock except for a WCS muffler. I actually think it cuts better then my 661 in most wood. Trying to find another one as a spare.
Hi Buckin ! The new saws (462, 572) have the same style carburetor as the old school adj versions. Basically you have “a little man with an orange screwdriver” constantly adj the h screw for best performance.... that’s it ! Now the internal porting is different on these new strato charged “air leak saws”. They actually inject raw air into the cylinder via another set of ports that “hold” the fresh charge from entering the cylinder for a .001 of a second (or so) such that the exhaust is cleaner (epa pollution crats!)... Both Husqvarna and STIHL are giving the customer a more powerful stock saw cc for cc than the predecessors ... If you look at a 372xp or a 440 you are getting about 5.3hp outta the box whereas the 572xp and 462c give ya about .5hp more . As far as torque you can make these new models stronger than the old-school by a fuzz simply because the carburation is superior. I can tune a carb with a screwdriver so they rip but I simply cannot beat software and a servo doing it ... be nice 👍 .... ruclips.net/video/Yy5yy0re4Gk/видео.html ... straight goods thru wny hard maple - feel/hear the powa ... she’d go thru BC balsa fir about 1.5-2.0x quicker .... outskis 😃
I love the bace under that stove bucking 👍👍
thx ,, me too
A few mods to the 461 makes a big difference . 371 /72 husky and 461 both excellent saws .
I had an 041 super. Then traded in for a 310. Shouldn't have traded and just kept the old one just to have it. I wasn't disappointed with the 310 at all though. I've been running it for years, at least a dozen. Farm, firewood, clearing pastures. Rebuilt the carb once from the ethanol crap. Hand file every time.
Edit- that's exactly why I should have kept my 041 super. I just had the torque on the bottom end when needed. We get locust that's been down for 20yrs or so and hard enough to throw sparks when cutting. The 310 does good, but you can dull a chain fast in that stuff. Don't think I'd be much into the electronic saws.
The 461 is my personal favorite saw. But then again I have never ran a 462 or a 500.
great saws
Loved this video keep it up brother
always a good video...way to go buckin
Brian is like the Gandolf of falling! Very wise and full of magic! But his staff has an axe head on one end🪓🪓
Holy O Smokes Boys! That chainsaw is the Jedi Knights light saber of chainsaws!!! Thanks for the videos and just being you!
Hey buckin buddy love to see you fall trees with the 461
Awesome video! I need to get one of your axes one of these days soon!
Have a wonderful day Billy Ray!
Old saws are like old Harleys. Run and sound awesome. But new electronics one run smother with less issues with different fuels. Myself give me the old ones. Maybe someday I'll go to the dark side I mean new side. Lol
Hey Billy great video
Guess your right on the 462 I run mine with 24inche cannon steel bar full house grind and it cuts like crazy and that's probably what it likes best for bigger wood it the 661
Going to try a roll of the 3/8 skip hard to get over here
Keep up the wedge work I love it
I think the 500i is in for a battle with that husky from iron horse that thing is awesome
Tell the CLAW I love him 👍
Love from Eire Gerry the Miller man